BWXT Medical has submitted a new drug application to the U.S. Food and Drug Administration to request approval of its technetium-99m generator for medical imaging. A daughter isotope of molybdenum-99, Tc-99m is used in more than 40 million diagnostic procedures annually. BWXT Medical is a subsidiary of Lynchburg, Va.-based BWX Technologies.

The Nuclear Innovation Alliance (NIA), a Washington, D.C.–based nonprofit, has released a new report, Advanced Nuclear Reactor Technology: A Company Compendium, along with an update to its Advanced Nuclear Reactor Technology: A Primer, first published last September.

Both reports are meant to serve as resources for investors, reporters, policymakers, regulators, and others wanting to learn more about the different technologies and key players involved in the design, licensing, construction, and operation of advanced nuclear reactors.

BWX Technologies, Inc., will deliver the first microreactor in the United States under a contract awarded by the U.S. Department of Defense Strategic Capabilities Office (SCO), the company announced today. BWXT will have two years to build a transportable microreactor prototype to the SCO’s Project Pele specifications and deliver it to Idaho National Laboratory for testing under a cost-type contract valued at about $300 million.

A team from the Department of Energy’s Office of Nuclear Energy joined ANS Executive Director/Chief Executive Officer Craig Piercy on April 27 for an ANS members–only online event to discuss the Biden administration’s fiscal year 2023 NE budget proposal. The proposed total for the office, $1.675 billion, is more than a $20 million increase from the FY 2022 enacted level of $1.654 billion.

The Department of Defense’s Strategic Capabilities Office (SCO) on April 13 released a record of decision (ROD) for Project Pele, a program intended to design and build a mobile microreactor at Idaho National Laboratory. The ROD for Project Pele is based on a final environmental impact statement (EIS) published in February. The designs submitted by the two candidate vendors—BWXT Advanced Technologies and X-energy—both fit the parameters analyzed in the final EIS.

Wilmington, N.C.–based GE Hitachi Nuclear Energy has signed a memorandum of understanding with Kärnfull Next—a new company and a wholly owned subsidiary of Swedish firm Kärnfull Future AB—to collaborate on the deployment of GEH’s BWRX-300 small modular reactor in Sweden.

The United States must ramp up the domestic production of high-assay low-enriched uranium (HALEU), the panelists agreed during a March 11 members-only webinar held amid heightened concerns about energy security following Russia’s invasion of Ukraine, and the day after Congress approved $45 million for the HALEU Availability Program for fiscal year 2022.

John Starkey, ANS director of public policy, moderated the webinar, which featured panelists Scott Kopple, senior director of government relations at BWX Technologies; Everett Redmond, senior technical advisor at the Nuclear Energy Institute; Benjamin Reinke, senior director of corporate strategy and advisor to the CEO at X-energy; Patrick White, project manager at the Nuclear Innovation Alliance (NIA); and Brad Williams, a member of the Senate Energy and Natural Resources Committee staff.

A recording of the webinar is available to ANS members.

The U.S. Department of Defense (DOD) is looking to reduce its reliance on local electric grids and diesel-fueled generators at military installations. Project Pele is designed to demonstrate the technical and safety features of mobile microreactors capable of generating up to 5 MWe.

Positioning nuclear power to combat climate change requires the rollout of advanced reactors to replace carbon-­emitting power generation. That necessity, and its urgency, is reflected in recent budget proposals for the Department of Energy’s Office of Nuclear Energy. Part of that proposed funding focuses on deploying new fuel technologies.

Metallic fuels, which are alloys of fissionable material, offer several advantages, including more fuel-­efficient reactors with a double or greater fuel burnup than the oxide fuels found in light water reactors. Fuel fabrication is also more cost-­effective with metallic fuels than with oxide fuels. Furthermore, much of the research and development effort needed to qualify these metallic fuels has been done.

BWX Technologies announced on January 24 that it has been awarded a $4.9 million contract amendment to produce TRISO fuel particles using natural uranium and to demonstrate performance under a defined production schedule. BWXT’s Nuclear Operations Group will perform the work at BWXT’s Lynchburg, Va., facility, where TRISO production was restarted in November 2020. The contract amendment was awarded by Battelle Energy Alliance, which manages Idaho National Laboratory on behalf of the Department of Energy.

As we begin a new year, it is natural not only to look back (see page 24 for top news stories of 2021) but also to look forward. Nuclear News reached out to leaders in the nuclear community to get their predictions on what 2022 has in store, whether broadly or for their specific areas within the community. Although the responses below are wide-ranging and varied, one thing is made clear by all of the respondents: 2022 will see growth and opportunity. The future for nuclear is bright.

Nuclear thermal propulsion (NTP) is one technology that could propel a spacecraft to Mars and back, using thermal energy from a reactor to heat an onboard hydrogen propellant. While NTP is not a new concept, fuels and reactor concepts that can withstand the extremely high temperatures and corrosive conditions experienced in the engine during spaceflight are being designed now.

BWX Technologies announced on December 13 that it has delivered coated reactor fuels to NASA for testing in support of the Space Technology Mission Directorate’s NTP project. BWXT is developing two fuel forms that could support a reactor ground demonstration by the late 2020s, as well as a third, more advanced and energy-dense fuel for potential future evaluation. BWXT has produced a videoof workers processing fuel kernels in a glovebox.

NuScale Power has signed a memorandum of understanding with Prodigy Clean Energy and Kinectrics to explore and inform the development of a regulatory framework to address the licensing and deployment of a marine power station (MPS). The MPS would integrate one to 12 NuScale power modules into a marine-based nuclear power plant system. The MPS would be shipyard-fabricated and marine-transported to its deployment location, where it would be moored in place in sheltered and protected waters at the shoreline. Prodigy is Canada’s first commercial marine nuclear power developer, specializing in integrating existing power reactors into stationary-deployed marine power plant structures. Kinectrics provides life-cycle management services to the electricity industry.

The Canadian Nuclear Safety Commission (CNSC) has amended Ontario Power Generation’s (OPG) operating license for its Darlington nuclear power station near Clarington, Ontario, allowing the company to produce the medical radioisotope molybdenum-99 using Darlington’s Unit 2 CANDU reactor. OPG subsidiary Laurentis Energy Partners, in conjunction with BWXT Medical, is leading the program to produce Mo-99 at Darlington.

X-energy and Centrus Energy announced last week that they have completed the preliminary design of the TRISO-X fuel fabrication facility and have signed a contract for the next phase of work. The planned facility would produce TRISO fuel particles and pack those particles into fuel forms, including the spherical graphite “pebbles” needed to fuel X-energy’s Xe-100 high-temperature gas reactor.

The first of eight 160-ton steam generators for Unit 6 at Canada’s Bruce nuclear power plant was installed last week as part of the facility’s major component replacement project. “Congrats to the MCR team and our partners, including @AeconGroup, @Framatome_CA, @UEandC, @mammoetglobal, @BWXT, and others who contributed to this historic moment,” Bruce Power tweeted on September 30.

The component was fabricated at BWXT Canada’s Cambridge, Ontario, location and was shipped to the Bruce site in late 2020, as shown in this video.

The vendor responsible for generator removal is the Steam Generator Replacement Team (SGRT), a 50-50 joint venture between Aecon and the Steam Generating Team, itself a partnership between Framatome and United Engineers & Constructors. In July, Framatome announced that SGRT had been awarded an approximately C$350 million (about $278 million) contract by Bruce Power to replace the steam generators at Units 3 and 4.

Plans to test a prototype mobile microreactor designed to military requirements moved ahead when the Department of Defense (DOD), acting through its Strategic Capabilities Office and with the Department of Energy serving as a cooperating agency, on September 16 announced the availability of a draft environmental impact statement for the construction and demonstration phase of Project Pele.

Bruce Power has removed the first of eight steam generators from Unit 6 at the Bruce nuclear plant in Ontario, the company announced earlier this week. The work was done as part of the facility’s major component replacement (MCR) project.

Fluor-BWXT Portsmouth, a joint venture of Fluor and BWX Technologies, along with engineering company Jacob, have received a contract extension valued at up to $690 million, including options, from the Department of Energy. The contract, announced April 6, is for environmental management work at the former Portsmouth Gaseous Diffusion Plant near Piketon, Ohio.

After funding one year of microreactor engineering design work by three teams, the Department of Defense (DOD) announced on March 22 that it has exercised contract options for two of those teams—led by BWXT Advanced Technologies and X-energy—to proceed with development of a final design for a transportable microreactor. Following a final design review in early 2022 and the completion of environmental analysis, one of the two companies may be selected to build a prototype reactor during a 24-­month construction and demonstration phase.

“We are thrilled with the progress our industrial partners have made on their designs,” said Jeff Waksman, Project Pele program manager. “We are confident that by early 2022 we will have two engineering designs matured to a sufficient state that we will be able to determine suitability for possible construction and testing.”