Nuclear News

Framatome’s new uranium recovery facility in Richland, Wash. Photo: Framatome

Framatome recently announced the opening of a $20-million scrap uranium recovery facility at its fuel manufacturing site in Richland, Wash., one of the French firm’s 14 North American locations. Construction on the approximately 11,000-square-foot building, which replaces a 35-year-old solvent extraction facility, began in July 2017, and it was declared fully operational on September 21, 2020.

According to Framatome’s October 6 announcement, the facility houses new and upgraded equipment for utilizing the solvent extraction process to separate uranium from feed streams containing non-uranium contaminants such as gadolinium. (Non-uranium contaminants, the company noted, include powders, pellets, and liquids that contain non-uranium impurities, making them unsuitable for other forms of recovery.) The recovered uranium is fed through the ammonium diuranate process to extract uranium dioxide. The extracted UO2 is then processed to make nuclear fuel pellets for fuel rods.

During a virtual meeting between the Atomic Energy Licensing Board of Malaysia, Japan’s Permanent Mission in Vienna, and the IAEA’s Department of Nuclear Safety and Security, an agreement was signed to establish a pool of nuclear security equipment, including items pictured here, in Malaysia. Photo: I. Pletukhina/IAEA

The International Atomic Energy Agency has joined with Malaysia’s Atomic Energy Licensing Board (AELB) to establish a pool of radiation detection equipment available for loan to support nuclear security training and detection capabilities in the Asia-Pacific region, the IAEA announced October 7

This is the first such repository facilitated by the IAEA. The equipment was purchased with Japan’s contribution to the IAEA Nuclear Security Fund.

The U.S. Department of Commerce and Rosatom, Russia’s state atomic energy corporation, have signed a final amendment to the Agreement Suspending the Antidumping Investigation on Uranium from the Russian Federation. The amendment extends the 1992 pact through 2040 and reduces U.S. reliance on uranium from Russia during that time period, the DOC announced October 6.

Previously, the agreement was set to expire on December 31 of this year. According to the DOC, the document’s expiration “would have resulted in unchecked imports of Russian uranium, potentially decimating the front-end of the nuclear fuel cycle in the United States.”

The final amendment is unchanged from the draft version, released for public comment on September 11. (For more specifics on the amendment, see our story on the draft here.)

Artist's concept of the Wylfa Newydd project. Image: Horizon Nuclear Power

Hopes for the construction of a two-unit nuclear power station in Wales—dashed some three weeks ago when Hitachi Ltd. officially announced its withdrawal from the proposed Wylfa Newydd plant—rose again slightly last week when the United Kingdom’s Planning Inspectorate agreed to delay its decision regarding issuance of a development consent order (DCO) for the project.

The original deadline for the decision had been September 30, but following the receipt of a pair of letters from Horizon Nuclear Power—the Hitachi subsidiary in charge of the project—the inspectorate consented to a December 31 extension.

A recently published paper on clean energy policy for economic recovery calls for the preservation of the current U.S. nuclear reactor fleet and the deployment of advanced nuclear technologies.

The paper, Energy Transitions: The Framework for Good Jobs in a Low-Carbon Future, was released last week by the Labor Energy Partnership (LEP), formed earlier this year by the Washington, D.C.–based nonprofit Energy Futures Initiative (EFI) and the AFL-CIO. According to a joint press release from the two organizations, the LEP was established to “develop policy solutions for a 21st century energy system that creates and preserves quality jobs while tackling the climate crisis.”

The LEP is jointly chaired by Ernest Moniz, founder and chief executive officer of EFI and former U.S. energy secretary, and Richard Trumka, president of the AFL-CIO.

Graph: EIA

Of the 10 U.S. power plants that generated the most electricity in 2019, nine were nuclear plants, a recent report from the U.S. Energy Information Administration states.

These 10 facilities produced a combined 230 million megawatt hours of electricity last year, accounting for 5.6 percent of all electricity generation in the United States, according to the report. The report also notes a shift in the makeup of the top plants over the past 10 years, from a mix of nuclear and coal-fired generators in 2010 to nearly all nuclear in 2019.

Coal’s share of U.S. electricity generation dropped from 45 percent in 2010 to 23 percent in 2019, the reports says. Stricter air emission standards and decreased cost competitiveness relative to other generators are given as the key reasons for coal’s decade of decline.

New Jersey–based Public Service Enterprise Group (PSEG) has filed applications to extend zero-emission certificates (ZEC) for its Hope Creek and Salem nuclear power plants, co-located in Hancocks Bridge, N.J. Hope Creek is home to one 1,237-MWe boiling water reactor, while Salem houses two pressurized water reactors, with Unit 1 rated at 1,169-MWe and Unit 2 at 1,181-MWe.

According to an October 1 announcement from PSEG, Hope Creek and Salem deliver more than 90 percent of all of New Jersey’s carbon-free energy and are essential to the state’s ability to achieve its goal of a 100 percent carbon-free energy supply by 2050, as outlined in the state’s Energy Master Plan.

More: An addendum to PSEG’s announcement, with information and documentation in support of the ZEC applications, can be found here.

Cutaway of the SPARC engineering design. Image: CFS/MIT-PSFC, CAD rendering by T. Henderson

Seven open-access, peer-reviewed papers on the design of SPARC, Commonwealth Fusion Systems’ (CFS) fusion tokamak, written in collaboration with the Massachusetts Institute of Technology’s Plasma Science and Fusion Center, were published on September 29 in a special edition of the Journal of Plasma Physics.

The papers describe a compact fusion device that will achieve net energy where the plasma generates more fusion power than used to start and sustain the process, which is the requirement for a fusion power plant, according to CFS.

The timeline for this planned device sets it apart from other magnetic confinement fusion tokamaks: Construction is to begin in 2021, with the device coming on line in 2025.

CFS expects the device to achieve a burning plasma—a self-sustaining fusion reaction—and become the world’s first net energy (Q>1) fusion system. The newly released papers reflect more than two years of work by CFS and the Plasma Science and Fusion Center to refine their design. According to CFS, the papers apply the same physics rules and simulations used to design ITER, now under construction in France, and predict, based on results from existing experiments, that SPARC will achieve its goal of Q>2. In fact, the papers describe how, under certain parameters, SPARC could achieve a Q ratio of 10 or more.

The reactor pressure vessel for Akkuyu-1. Photo: Rosatom

Rosatom, Russia’s state atomic energy corporation, announced last week that the reactor pressure vessel for Unit 1 of Turkey’s Akkuyu plant has been shipped from the Atommash plant in Volgodonsk, Russia. Also, the four steam generators for the reactor have arrived at the Vostochny Cargo Terminal, near the port of Mersin in southern Turkey. Atommash has shipped all the most important large-sized equipment for the primary circuit of the reactor for Akkuyu-1, Rosatom said.

Atommash is a branch of AEM Technologies, which is part of Atomenergomash, the equipment-building division of Rosatom.

The European Union’s education and training policy must do more to ensure that the nuclear sector has a sufficient number of people with the right skills, according Nuclear: Investing in a Competent Workforce for the Benefit of Society, a new position paper from Foratom. The Brussels-based Foratom is the trade association for the nuclear energy industry in Europe.

Stressing the vital roles that nuclear plays in low-carbon power generation and medical diagnosis and treatment, Foratom warns of a growing skills shortage, stemming in part from the significant portion of the nuclear workforce approaching retirement age.

In addition, the report states that “adapting to digitalization and automatization (which are important skill shifts for the decommissioning sector, as well as for new build) will be a challenge faced by the industry. This will require the reskilling and upskilling of workers, as well as ensuring an adequate transfer of knowledge between generations through apprenticeship schemes, for instance.”

Paul Browning, Mitsubishi Power, and Paul Hinnenkamp, Entergy, sign the joint agreement on September 23. Photo: Entergy

New Orleans–based Entergy Corporation last week announced a commitment to achieve net-zero carbon emissions by 2050, joining a growing list of major energy companies to make that promise—including Dominion Energy, Duke Energy, Southern Company, Xcel Energy, and Public Service Enterprise Group. And, like those companies, Entergy says that it sees nuclear playing an important role in the realization of that goal.

The House of Representatives on September 29 unanimously passed three bills aimed at strengthening the cybersecurity of the U.S. electric grid and other energy infrastructure. The legislation now moves to the Senate for consideration.

Ameren Corporation has announced the establishment of a goal of net-zero carbon emissions by 2050 across all of its operations in Missouri and Illinois, according to a recent news release from the company.

This goal is included in subsidiary Ameren Missouri’s latest integrated resource plan (IRP), filed on September 28 with the Missouri Public Service Commission. (In Ameren Missouri’s 2017 IRP, carbon emissions were to be reduced 80 percent from 2005 levels by 2050.)

On August 27, I stood in front of small groups of socially distanced employees at our Dresden Generating Station in Illinois, announcing plans for the premature retirement of the nuclear facility next fall. A hundred miles away, our chief operating officer was delivering a similar, equally somber announcement to employees at the Byron Station.

Despite being among the safest, most efficient, and reliable nuclear plants in the nation, Dresden and Byron face revenue shortfalls in the hundreds of millions of dollars because of declining energy prices and market rules that allow fossil fuel plants to underbid clean merchant nuclear resources in the PJM capacity auction, even though there is broad public support for sustaining and expanding clean energy resources to address the climate crisis.

Sens. John Barrasso (R., Wyo.) and Martin Heinrich (D., N.M.) on September 24 introduced S. 4694, the Russian Suspension Agreement Extension Act of 2020, designed to extend and expand limits on Russian uranium imports. The legislation—cosponsored by Sens. Tom Cotton (R., Ark.), Kevin Cramer (R., N.D.), Lindsey Graham (R., S.C.), Joe Manchin (D., W.Va.), Lisa Murkowski (R., Alaska), and Jim Risch (R., Idaho)—has been referred to the Senate Committee on Energy and Natural Resources.

The Department of Energy has announced the reestablishment of the Arctic Energy Office (AEO), to be located on the campus of the University of Alaska Fairbanks. The AEO was originally established in 2001 but failed to receive sufficient funding. Energy Secretary Dan Brouillette had pledged to reopen the office by the close of the current federal fiscal year.

The focus of the AEO, according to the DOE, will include international cooperation on Arctic issues, research on methane hydrates, and the development of advanced microgrids and nuclear power systems, such as small modular reactors.

Darlington nuclear generating station. Photo: OPG

Ontario Power Generation, its subsidiary Laurentis Energy Partners, and BWXT ITG Canada and its affiliates announced on September 24 that the companies are making “significant progress” toward the production of molybdenum-99 at OPG’s Darlington nuclear power plant. Darlington will become the first commercial operating nuclear reactor to produce the medical radioisotope.

A precursor to technetium-99m, Mo-99 is used in more than 40 million procedures a year to detect cancers and diagnose various medical conditions.

Concrete pouring for the foundation slabs for the Akkuyu-2 reactor and turbine buildings has been completed, Akkuyu Nuclear has announced. Unit 2 is one of four reactors under construction at the Akkuyu site, located on the Mediterranean coast in southern Turkey.

More than 17,000 cubic meters (about 600,350 cubic feet) of concrete have been poured into the Akkuyu-2 reactor building’s foundation, The company reported on September 23. The area of the concrete slab is 6,864 square meters (about 73,883 square feet), while its height and depth are 2.6 meters (about 8.5 feet) and over 8 meters (over 26 feet), respectively, according to the company.

The London-based World Nuclear Association (WNA) on September 23 released The World Nuclear Supply Chain: Outlook 2040, a market-oriented look at the opportunities and challenges for nuclear power plants and their supply chain, including scenarios for the evolution of nuclear energy over the next two decades.

The report provides information on nearly 300 major independent suppliers of nuclear-grade structures, systems, components, and services, as well as an up-to-date picture of ongoing and planned nuclear plant construction, decommissioning, and major refurbishment and waste management projects.

Eric Goldin, president of the Health Physics Society, is a radiation safety specialist with 40 years of experience in power reactor health physics, supporting worker and public radiation safety programs. A certified health physicist since 1984, he has served on the American Board of Health Physics, and since 2004, he has been a member of the National Council on Radiation Protection and Measurements’ Program Area Committee 2, which provides guidance for radiation safety in occupational settings for a variety of industries and activities. He was awarded HPS Fellow status in 2012 and was elected to the NCRP in 2014.

Goldin’s radiological engineering experience includes ALARA programs, instrumentation, radioactive waste management, emergency planning, dosimetry, decommissioning, licensing, effluents, and environmental monitoring.

The HPS, headquartered in Herndon, Va., is the largest radiation safety society in the world. Its membership includes scientists, safety professionals, physicists, engineers, attorneys, and other professionals from academia, industry, medical institutions, state and federal government, the national laboratories, the military, and other organizations.

The HPS’s activities include encouraging research in radiation science, developing standards, and disseminating radiation safety information. Its members are involved in understanding, evaluating, and controlling the potential risks from radiation relative to the benefits.

Goldin talked about the HPS and health physics activities with Rick Michal, editor-in-chief of Nuclear News.