Two projects intended to accelerate the deployment of hydrogen production technology at existing U.S. light-water reactors received the bulk of the funding announced by the Department of Energy’s Office of Nuclear Energy (NE) on October 8 under the ongoing U.S. Industry Opportunities for Advanced Nuclear Technology Development funding opportunity announcement (FOA). Out of three projects with a total value of $26.9 million, the two involving hydrogen production have a total value of $26.2 million.

The Department of Energy has selected the recipients of cost-shared funding for its Advanced Reactor Demonstration Program (ARDP) and has notified Congress of the selection, the DOE press staff indicated by tweet on October 8. A public announcement of the recipients is expected this week.

Reactor designers and others looking to invest in advanced nuclear technology had until August 19 to apply through a funding opportunity announcement (FOA) announced in May, which included $160 million in initial funds to build two reactors within the next five to seven years. Applicants were encouraged to connect with other advanced reactor stakeholders—including technology developers, reactor vendors, fuel manufacturers, utilities, supply chain vendors, contractors, and universities—through the ARDP FOA Collaboration Hub and apply as a team. This means that the DOE’s selection of a particular reactor design stands to benefit more than just the team behind the reactor’s initial design.

The proposed Versatile Test Reactor complex would cover about 20 acres. Image: INL

Now that the Department of Energy has approved Critical Decision 1 for the Versatile Test Reactor (VTR) project, the engineering design phase can begin once Congress appropriates funding, according to a September 23 announcement from the DOE’s Office of Nuclear Energy. The DOE has requested $295 million for the project in fiscal year 2021.

The news came nearly one month after a team led by Bechtel National Inc. (BNI), and including GE Hitachi Nuclear Energy (GEH) and TerraPower, entered into contract negotiations with Battelle Energy Alliance (BEA) for the design-and-build phase of the VTR. GEH’s sodium-cooled fast reactor PRISM technology was selected to support the VTR program in November 2018.

Hunter

An op-ed piece in the September 17 Salt Lake City Tribune touts nuclear energy as needed for a carbon-free future. The piece was written by Doug Hunter, chief executive officer and general manager of Utah Associated Municipal Power Systems (UAMPS).

A look inside the TFTR plasma vessel. Photo: DOE

The Tokamak Fusion Test Reactor (TFTR) at Princeton University and the Fuel Cycle Facility (FCF) (now known as the Fuel Conditioning Facility) at Idaho National Laboratory have been designated as ANS Nuclear Historic Landmarks. The official awarding of the honors will occur during the 2020 ANS Virtual Winter Meeting, which begins November 16.

The TFTR received the award for demonstrating significant fusion energy production and tritium technologies for future nuclear fusion power plants and for the first detailed exploration of magnetically confined deuterium-tritium (D-T) fusion plasmas.

INL’s FCF and its Experimental Breeder Reactor II (EBR-II) were honored for demonstrating on-site recycling of used nuclear fuel back into a nuclear reactor.

Full-scale mockup of the upper third of the NuScale Power Module. Photo: NuScale

With a design that has just emerged from a rigorous safety evaluation by the Nuclear Regulatory Commission, and a customer—Utah Associated Municipal Power Systems (UAMPS)—getting ready to prepare a combined license (COL) application, what is next for Oregon-based NuScale Power and for near-term small modular reactor prospects in the United States? As milestones are reached, many want to know.

NuScale plans to supply twelve 60-MWe modules for a 720-MWe plant—called the Carbon Free Power Project (CFPP) by UAMPS—to be sited at Idaho National Laboratory. A smaller, 50-MWe module version of NuScale’s design recently became the first SMR to receive a final safety evaluation report (FSER) from the Nuclear Regulatory Commission.

“The NRC design approval represents a significant de-risking factor for the CFPP,” said UAMPS spokesperson LaVarr Webb. The project is “making steady progress,” Webb said, adding that “UAMPS General Manager and CEO Doug Hunter has said it is much more important to do the project right than to do it fast.”

Idaho National Laboratory’s Transient Reactor Test Facility, also known as TREAT, returned to service in 2017 after a hiatus of more than two decades. To make full use of TREAT’s capabilities, researchers at INL created the Minimal Activation Retrievable Capsule Holder (MARCH) test vehicle system, which, according to an August 26 Department of Energy press release, can cut years off the development process for nuclear fuels and materials and allow new clients, like NASA, to take advantage of TREAT’s capabilities.

Artist’s rendering of the Versatile Test Reactor. INL Image

A team led by Bechtel National Inc. (BNI) that includes GE Hitachi Nuclear Energy (GEH) and TerraPower is in contract negotiations with Battelle Energy Alliance (BEA) for the design-and-build phase of the Versatile Test Reactor, BEA announced on August 24. As planned, the VTR would support irradiation testing of fuels, materials, and equipment designed for advanced reactors.

Peters

Mark Peters has been named executive vice president of laboratory operations for Battelle, the company announced on August 20. He will take over for Ron Townsend, who earlier this summer announced that he plans to retire in January 2021. Peters, who has served as laboratory director at Idaho National Laboratory since October 2015, will remain in this role until his successor has been selected and is in place. He will assume his new role at Battelle following this transition at INL.

The Department of Energy is asking for input on an Energy Storage Grand Challenge (ESGC) Draft Roadmap and Request for Information (RFI) and recently extended the response deadline to August 31. While there is no “N” for nuclear in “ESGC,” nuclear is definitely part of the DOE’s plan for future energy storage technologies and integrated energy systems designed to improve the efficiency and reliability of U.S. energy markets. In fact, the House Energy and Water Appropriations Committee has called for $4 million in the Office of Nuclear Energy’s Fiscal Year 2021 budget to support energy storage.

This year’s Utility Working Conference Virtual Summit, held on August 11, had a dynamic opening plenary and a packed roster of informative sessions. Following are recaps of some of the 2:00 p.m. (EDT) sessions that took place.

Don't miss Newswire's coverage of the opening plenary and the sessions at 12:00 pm.

This year’s Utility Working Conference, held on August 11, had a dynamic opening plenary and a packed roster of informative sessions. Following are recaps of some of the 12:00 p.m. (EDT) sessions that took place.

You can read about the UWC's opening plenary here.

Look for more meeting recaps later today.

There’s a new mythbuster out in the Idaho desert by the name of Don Miley, separating nuclear fact from fiction in the service of science and the Idaho National Laboratory. An article released by INL’s Communications and Outreach staff on August 3—“Nuclear MythBusting: Using Social Media to Set the Record Straight”—explains what you need to know about INL’s new public outreach venture on YouTube. And Miley, a longtime INL tour guide, tells what everyone should know about nuclear technologies in these short videos. Just head to INL’s YouTube channel.

Working in INL’s Human Systems Simulation Laboratory, senior R&D scientist Ahmed Al Rashdan co-developed the Advanced Remote Monitoring project for the LWRS Program.

There are numerous similarities between auto racing pit crews and the people in the nuclear power industry who get us through outages: Pace. Efficiency. Diagnostics. Teamwork. Skill. And safety above all else.

To Paul Hunton, a research scientist at Idaho National Laboratory, the keys to successfully navigating a nuclear plant outage are planning and preparation. “When you go into an outage, you are ready,” Hunton said. “You need to manage outage time. You want to avoid adding delays to the scheduled outage work because if you do, it can add a couple million dollars to the cost.”

Hunton was the principal investigator for the September 2019 report Addressing Nuclear Instrumentation and Control (I&C) Modernization Through Application of Techniques Employed in Other Industries, produced for the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Program, led by INL. Hunton drew on his experience outside the nuclear industry, including a decade at Newport News Shipbuilding.

A three-part free webinar workshop, Separating Nuclear Reactors from the Power Block with Heat Storage: A New Power Plant Design Paradigm, will run for three upcoming Wednesdays, starting this week on July 29. The workshop is being hosted jointly by the Massachusetts Institute of Technology (MIT), Idaho National Laboratory (INL), and the Electric Power Research Institute (EPRI).

BWX Technologies has signed a $26-million, 20-month contract to expand and upgrade its TRISO fuel manufacturing line. The recently announced deal, awarded by Idaho National Laboratory, calls for the expansion of BWXT’s capacity for the manufacture of TRISO fuel compacts and the upgrading of existing systems for delivering production-scale quantities of TRISO fuel.

With a new generation of nuclear reactors in the works, Idaho National Laboratory has embraced digital engineering (DE) as a means of achieving the same efficiencies that companies in the private sector have been able to realize in everything from concert halls to aircraft engines.

DE—using advanced technologies to capture data and craft design in a digitized environment—has been evolving since the 1990s. For Mortenson Construction, a worldwide construction firm, using virtual design and construction resulted in a cumulative 600 days saved over 416 projects and a 25 percent increase in productivity. By building digital twins for assets, systems, and processes, DE has avoided more than $1.05 billion in customer, production, and mechanical losses.

Leaders at INL recognized in 2018 that DE could be useful in the design and construction of new commercial and test reactors. Managing construction costs, timing, and performance will be essential to maintain U.S. competitiveness.

The Nuclear Regulatory Commission has announced a notice of opportunity to intervene in an adjudicatory hearing on Oklo Power’s combined license application (COLA) for construction of a microreactor at Idaho National Laboratory. The notice, dated June 24, was published in the Federal Register on June 30, opening a 60-day window for petitions.

Artist’s conception of Oklo’s Aurora. (Image: Gensler)

Oklo's 1.5-MWe fast spectrum design known as Aurora is the first advanced non–light-water reactor to be accepted for a licensing review by the Nuclear Regulatory Commission. Both the reactor’s design and the anticipated licensing process mark a major departure from large light-water reactor design and licensing.