X-energy has announced that its wholly owned subsidiary, TRISO-X, plans to build the TRISO-X Fuel Fabrication Facility, dubbed TF3, at the Horizon Center Industrial Park in Oak Ridge, Tenn. X-energy has produced kilogram quantities of fuel at its pilot plant at Oak Ridge National Laboratory through a public-private partnership.

The commercial plant will use high-assay low-enriched uranium (HALEU) to produce TRISO particles, which are fabricated into fuel forms, including the spherical graphite “pebbles” needed to fuel the company’s Xe-100 high-temperature gas reactor. Site preparation and construction are expected to get underway in 2022, and commissioning and start-up are scheduled for as early as 2025, according to X-energy.

The United States must ramp up the domestic production of high-assay low-enriched uranium (HALEU), the panelists agreed during a March 11 members-only webinar held amid heightened concerns about energy security following Russia’s invasion of Ukraine, and the day after Congress approved $45 million for the HALEU Availability Program for fiscal year 2022.

John Starkey, ANS director of public policy, moderated the webinar, which featured panelists Scott Kopple, senior director of government relations at BWX Technologies; Everett Redmond, senior technical advisor at the Nuclear Energy Institute; Benjamin Reinke, senior director of corporate strategy and advisor to the CEO at X-energy; Patrick White, project manager at the Nuclear Innovation Alliance (NIA); and Brad Williams, a member of the Senate Energy and Natural Resources Committee staff.

A recording of the webinar is available to ANS members.

Citing “improving market sentiment,” Tim Gitzel, president and chief executive officer of the Canadian uranium mining company Cameco, announced on February 9 the planned restart of operations at the McArthur River mine in Saskatchewan.

Westinghouse Electric Company and Southern Nuclear have agreed to a plan to install four Westinghouse lead test assemblies in Vogtle-2, a 1,169-MWe pressurized water reactor located in Waynesboro, Ga. Four lead test assemblies containing uranium enriched up to 6 percent U-235 will be loaded in Vogtle-2 in 2023, marking the first time that fuel rods with uranium enriched above 5 percent U-235 are put in use in a U.S. commercial power reactor.

BWX Technologies announced on January 24 that it has been awarded a $4.9 million contract amendment to produce TRISO fuel particles using natural uranium and to demonstrate performance under a defined production schedule. BWXT’s Nuclear Operations Group will perform the work at BWXT’s Lynchburg, Va., facility, where TRISO production was restarted in November 2020. The contract amendment was awarded by Battelle Energy Alliance, which manages Idaho National Laboratory on behalf of the Department of Energy.

A longstanding issue in boiling water reactors—shadow corrosion on zirconium alloy fuel rods and fuel channels—has been reproduced in the Michigan Ion Beam Laboratory as part of an effort to understand and prevent the phenomenon. Research led by Peng Wang, a University of Michigan assistant research scientist in nuclear engineering and radiological sciences, was published in the January 2022 issue of the Journal of Nuclear Materials and described in a recent university news article.

The Department of Energy asks no fewer than 21 multipart questions in its request for information on plans to set up a new program to ensure the availability of high-assay, low-enriched uranium (HALEU) in the United States, encompassing the who, what, when, where, and how of HALEU enrichment, deconversion, fabrication, and transportation. Interested parties were given just 30 days from the December 14 announcement to send their input to the DOE; the deadline is January 13.

Details: Written comments and information are requested on or before January 13. They can be submitted online at regulations.gov or by email to rfi-haleu@hq.doe.gov in a Microsoft Word or a PDF file. See the full request for information published in the Federal Register for additional information.

Oklo plans to fuel its demonstration microreactor with high-assay low-enriched uranium (HALEU). To secure a source of HALEU for its nth-of-a-kind microreactor, Oklo has signed a nonbinding letter of intent with Centrus Energy to cooperate on the deployment of a HALEU production facility.

X-energy and Centrus Energy announced last week that they have completed the preliminary design of the TRISO-X fuel fabrication facility and have signed a contract for the next phase of work. The planned facility would produce TRISO fuel particles and pack those particles into fuel forms, including the spherical graphite “pebbles” needed to fuel X-energy’s Xe-100 high-temperature gas reactor.

Idaho National Laboratory recently released footage of a new experiment at its Transient Reactor Test Facility (TREAT) that simulates what happens to a nuclear fuel pin when it starts to overheat. Go to Twitter for the original post, or cut to the chase and watch a 14-second clip on YouTube.

For years, pressure has been building for a commercial path to a stable supply of high-assay low-enriched uranium (HALEU)—deemed essential for the deployment of advanced power reactors—but advanced reactor developers and enrichment companies are still watching and waiting. In contrast, the uranium spot price soared after Sprott Physical Uranium Trust, a Canadian investment fund formed in July, began buying up U3O8 supplies, causing the price to increase over 60 percent, topping $50 per pound for the first time since 2012. Fueled by growing acknowledgment that nuclear power is a necessary part of a clean energy future, uranium is the focus of attention from Wall Street to Capitol Hill.

The United States Congress needs to take swift action to build a domestic supply of fuel for advanced reactors and to avoid future dependence on Russia for advanced nuclear fuel, the American Nuclear Society wrote in a Sept. 14 letter to the U.S. Senate Energy and Natural Resources Committee.

As a knowledge manager for the 2018 Utility Working Conference, I had many opportunities to interact with nuclear utility leaders. The discussions often centered around finding innovative ways to sustain the existing fleet of nuclear plants by improving plant economics.

To nuclear fuel suppliers, today’s operating reactors represent a defined customer base with predictable demands. Utilities must order their next fuel reload far in advance of an outage; enrichers and fabricators work to fill those orders. Adapting such a highly optimized supply chain to accommodate new products—fuels with new materials, claddings, and higher enrichments and burnups—will require alignment between all parties involved to meet the associated research, enrichment, manufacturing, regulatory, transportation, and operating experience needs.

That was the consensus during “Current Accident Tolerant Fuel Environment,” a technical session held on March 9 during the Nuclear Regulatory Commission's four-day Regulatory Information Conference (RIC, March 8-11). The session was chaired by NRC Chairman Christopher Hanson, who was taking part in his first RIC as a member of the commission.

Image: Purdue University/Maria Okuniewski

A team of researchers led by Purdue University has used X-ray imaging conducted at Argonne National Laboratory’s Advanced Photon Source to obtain a three-dimensional view of the interior of an irradiated nuclear fuel sample. The use of synchrotron micro-computed tomography could lead to more accurate modeling of fuel behavior and more efficient nuclear fuel designs, according to the researchers.

Terrestrial Energy and the Nuclear Research and Consultancy Group (NRG) have started a graphite irradiation testing program at NRG’s Petten Research Centre’s High Flux Reactor (HFR), located in the Netherlands. According to Terrestrial Energy, which is based in Ontario, Canada, the work is part of broader program of confirmatory testing of components and systems for the company’s Integral Molten Salt Reactor (IMSR), designed to produce both electricity and industrial heat.

The testing program at NRG was planned to confirm the predicted performance of selected graphite grades throughout the seven-year cycle of an IMSR core. The testing was designed in cooperation with Frazer-Nash Consultancy, and will simulate IMSR core conditions at a range of operating temperatures and neutron flux conditions.

“Our work with NRG at its Petten HFR facility is an important element of our overall IMSR test program, now well underway. The start of in-core irradiation tests speaks to our progress and comes after many months of prior work,” Simon Irish, CEO of Terrestrial Energy, said on November 12. “The NRG work also reflects an important feature of our testing strategy. That is to engage existing laboratories offering existing capabilities rather than build those in-house, a strategy that is essential for our early deployment schedule.”

Two projects intended to accelerate the deployment of hydrogen production technology at existing U.S. light-water reactors received the bulk of the funding announced by the Department of Energy’s Office of Nuclear Energy (NE) on October 8 under the ongoing U.S. Industry Opportunities for Advanced Nuclear Technology Development funding opportunity announcement (FOA). Out of three projects with a total value of $26.9 million, the two involving hydrogen production have a total value of $26.2 million.

TerraPower announced on September 15 that it plans to work with Centrus Energy to establish commercial-scale production facilities for the high-assay, low-enriched uranium (HALEU) needed to fuel many advanced reactor designs.

The proposed investment in HALEU fuel fabrication is tied to a TerraPower-led submittal to the Department of Energy’s Advanced Reactor Demonstration Program (ARDP), which was created to support the deployment of two first-of-a-kind advanced reactor designs within five to seven years. TerraPower would like one of those designs to be Natrium, the 345-MWe sodium fast reactor that it has developed with GE Hitachi Nuclear Energy.

Idaho National Laboratory’s Transient Reactor Test Facility, also known as TREAT, returned to service in 2017 after a hiatus of more than two decades. To make full use of TREAT’s capabilities, researchers at INL created the Minimal Activation Retrievable Capsule Holder (MARCH) test vehicle system, which, according to an August 26 Department of Energy press release, can cut years off the development process for nuclear fuels and materials and allow new clients, like NASA, to take advantage of TREAT’s capabilities.

Separation of Kr-85 from spent nuclear fuel by a highly selective metal organic framework. Image: Mike Gipple/National Energy Technology Laboratory

According to a story published by the Massachusetts Institute of Technology on July 24, the capture of gaseous fission products such as krypton-85 during the reprocessing of spent nuclear fuel could be aided by the adsorption of gasses into an advanced type of soft crystalline material, metal organic frameworks(MOF), which feature high porosity and large internal surface areas that can trap an array of organic and inorganic compounds.