The Senate Environment & Public Works Committee on May 30 approved the Accelerating Deployment of Versatile, Advanced Nuclear for Clean Energy (ADVANCE) Act in a bipartisan 16-3 vote.

General Atomics (GA) and Tokamak Energy Ltd. are each independently developing magnetic confinement fusion power plant concepts that would use a tokamak and high-temperature superconducting (HTS) magnets to confine and shape a plasma heated to over 100 million degrees Celsius. On May 30, they announced a memorandum of understanding to collaborate on HTS magnet technology for fusion energy and other applications.

To help plan and prepare for new technologies involving artificial intelligence, the Nuclear Regulatory Commission has released its Artificial Intelligence Strategic Plan (NUREG-2261) for fiscal years 2023–2027.

The NRC said that it expects license applications that include the use of AI technologies to be submitted to the agency for review and approval within the next few years. The strategic plan is meant to help ensure that NRC staff are prepared to review and evaluate such applications.

In the foreword, the NRC Office of Nuclear Regulatory Research director Raymond Furstenau introduces the strategic plan, writing, “We recognize that interest in AI is growing rapidly in both the public and private sectors. As such, I think [it] is important to lay the groundwork needed to ensure the safe and secure use of AI in NRC-regulated activities.”

Leaders of the House Committee on Energy and Commerce last month sent letters to a variety of nuclear sector stakeholders requesting input in preparation for a June 14 hearing titled “Oversight of NRC: Ensuring Efficient and Predictable Nuclear Safety Regulation for a Prosperous America.” (The hearing will be livestreamed at https://energycommerce.house.gov/.)

“We invite you to submit to the committee information and recommendations to improve the licensing review and approval process, as well as the oversight of NRC licensees,” the lawmakers wrote. “We are interested in NRC activities involving the licensing and oversight of today’s operating reactors, as well as the siting, licensing, construction, and oversight of advanced nuclear reactor technologies.” The letter also noted the committee’s interest in “improving NRC efficiency, management of regulatory costs and fees, public health and safety, staff effectiveness and culture, collaboration with the Department of Energy, and international activities.”

Not everyone in the nuclear industry is familiar with a series of 105 historic wall charts displaying detailed illustrations of nuclear reactors and their internal components, but Ronald A. Knief is. Knief, a retired professor of chemical and nuclear engineering at the University of New Mexico and former principal engineer at Sandia National Laboratories, has spent decades collecting these educational items, which were originally published as foldout inserts in Nuclear Engineering International magazine from the 1950s through early 2000s.

McMorris Rodgers

The House Energy and Commerce Committee has advanced a bill to the chamber’s floor that, with certain exceptions, would ban the import of low-enriched uranium from Russia into the United States. Introduced in February by the E&C Committee’s chair, Cathy McMorris Rodgers (R., Wash.), the Prohibiting Russian Uranium Imports Act (H.R. 1042) was approved in a (slightly) bipartisan 29–21 vote on May 24.

The legislation would start banning Russian uranium 90 days after its enactment but would also allow the Department of Energy to issue waivers should the DOE determine (1) that there is no alternate source of low-enriched uranium available to keep a U.S. nuclear reactor in operation or (2) that importing Russian uranium is in the national interest.

Claflin University students recently toured the Department of Energy’s Savannah River Site in South Carolina to learn about the facilities and occupations there.

The Vogtle expansion project’s Unit 3 reactor has attained 100 percent energy output—the first time it has reached its maximum expected output of approximately 1,100 MWe, Georgia Power announced yesterday.

Westinghouse Electric Company, Bechtel, and Polish utility Polskie Elektrownie Jądrowe (PEJ)—the three firms leading the effort to build Poland’s first nuclear power plant—have announced the signing of a new agreement that defines the main principles of cooperation on the project’s design and construction and confirms the implementation of its next major stage.

At the Nuclear Energy Institute’s Nuclear Energy Assembly, held this year in Washington, D.C., the Henry DeWolf Smyth Nuclear Statesman Award was presented on May 17 to Mark Peters, Battelle’s executive vice president for national laboratory management and operations.

Seven sites in southwestern Virginia have been identified as “competitive hosting grounds” for small modular reactors by a feasibility study Dominion Engineering, Inc. (DEI) prepared for the LENOWISCO Planning District Commission. (The planning district, based in Duffield, Va., serves the counties of Lee, Wise, and Scott and the city of Norton.) At a May 22 press conference at LENOWISCO’s offices, DEI chemical engineer and principal investigator Chuck Marks said the review represents the “very early stages of, does this region have what it takes to site one of these reactors, successfully deploy and successfully operate. And the answer is overwhelmingly yes,” according to an article in the Cardinal News.

Serving as the world’s first scalable nuclear power plant, Shippingport Atomic Power Station led the way for today’s nuclear generation fleet. Shippingport was centrally located roughly 25 miles from Pittsburgh, Pa., to provide electrical generation for many end-users. Shippingport also served as an experimental reactor that allowed engineers and designers the ability to test different core designs, and as such, the site housed additional testing equipment otherwise not commonly seen. The primary goal of Shippingport was always to generate electricity; however, its ability to function as an experimental reactor served utilities in further development of scalable nuclear generation.

Today’s atomic clocks are exceptional timepieces that won’t lose or gain a second in 30 billion years. But if you’re looking for even more precision, you’ll be glad to learn that physicists at CERN’s ISOLDE nuclear physics facility have observed the decay of thorium-229 nuclei trapped in a crystalline structure and confirmed the potential for a nuclear clock. CERN announced the news on May 24.

The Texas-based engineering company Jacobs and the University of Manchester in England are forming a new international research center designed to create robotics and autonomous systems that the organizations say will play a key role in the response to climate change.

The Nuclear Energy Institute—along with Constellation, Energy Harbor, PSEG, and Vistra—submitted a 19-page letter on May 24 to the Treasury Department and Internal Revenue Service, taking issue with April 10 comments to those agencies from the Clean Air Task Force (CATF) and Natural Resources Defense Council (NRDC) concerning the Inflation Reduction Act’s clean hydrogen production tax credit (Internal Revenue Code sec. 45V). (The Treasury and the IRS released a notice last November requesting public input on the credit’s implementation.)

The American Nuclear Society's 2023 Utility Working Conference and Vendor Technology Expo is accepting applications for knowledge managers to work during the meeting. The UWC, which will have a theme of “Building Resiliency in a Rapidly Changing World,” will be held at the JW Marriott Marco Island Beach Resort on Marco Island, Fla., on August 6–9, 2023.

The ANS Operations and Power Division will pay the conference registration fee for up to six knowledge managers, who also will receive three complimentary nights of housing at the Marriott resort.

Further details on the conference are available online.

After initial runs using a mix of radiological waste and nonradioactive simulant, the Integrated Waste Treatment Unit (IWTU) at the Idaho National Laboratory site has progressed to treating sodium-bearing waste entirely, the Department of Energy’s Office of Environmental Management (DOE-EM) announced on May 22.

NuScale Power announced yesterday that it has joined the Romanian Atomic Forum, aka Romatom, as a supporting member “to champion the association’s nuclear energy goals and further the next generation of advanced nuclear technology experts, technologists, and operators in Romania.” The move further deepens the American small modular reactor company’s commitment to the deployment of a VOYGR SMR plant in the Central European state.

Both current and advanced nuclear are among the clean energy sources that will be required to reach the Biden administration’s declared goal of a zero-carbon U.S. electricity sector by 2035, concludes a new report from the Department of Energy.

On the Path to 100% Clean Electricity, released last week, features a list of 10 actions the authors consider necessary for meeting that climate commitment. The full report can be accessed here.

Arielle Miller

In the world of engineering, obtaining a Professional Engineering (P.E.) license is often seen as a significant milestone. The journey toward earning this esteemed credential can be arduous and time-consuming, involving rigorous exams, licensing applications, and recommendations from licensed professionals. However, many young engineers question the practicality of obtaining a P.E. license, especially when starting their own business. This article explores the importance of having a P.E. license when venturing into entrepreneurship and how it can benefit engineers in their professional journey.

For aspiring entrepreneurs in engineering, acquiring a P.E. license early in their careers can be a strategic move. Working for an established company allows young engineers to take advantage of opportunities like employer-funded preparation courses and financial assistance for licensing and exam fees. By investing time and effort into obtaining a P.E. license during the early-career stage, engineers position themselves for future success in their entrepreneurial endeavors.