Research & Applications

CMOS sensors such as this could be made more tolerant to ionizing radiation. Photo: NASA/Wikimedia Commons

High-energy radiation can be detrimental to electronic equipment, necessitating the use of radiation-hardened and -resistant electronics in nuclear energy, decommissioning, and space exploration. The online newsletter Tech Xplore reports on a radiation-hardened and repairable integrated circuit being fabricated by researchers at Peking University, Shanghai Tech University, and the Chinese Academy of Sciences.

The radiation-immune and repairable circuits developed by the researchers are based on field-effect transistors (FET) that use a semiconducting carbon nanotube transistor as a channel, an ion gel as its gate, and a substrate made of polyimide. According to the article, the FETs have a radiation tolerance of up to 15 Mrad, which is notably higher than the 1 Mrad tolerance of silicon-based transistors. The FETs are also capable of being recovered by annealing at moderate temperatures (100 °C for 10 minutes).

Cutaway of the SPARC engineering design. Image: CFS/MIT-PSFC, CAD rendering by T. Henderson

Seven open-access, peer-reviewed papers on the design of SPARC, Commonwealth Fusion Systems’ (CFS) fusion tokamak, written in collaboration with the Massachusetts Institute of Technology’s Plasma Science and Fusion Center, were published on September 29 in a special edition of the Journal of Plasma Physics.

The papers describe a compact fusion device that will achieve net energy where the plasma generates more fusion power than used to start and sustain the process, which is the requirement for a fusion power plant, according to CFS.

The timeline for this planned device sets it apart from other magnetic confinement fusion tokamaks: Construction is to begin in 2021, with the device coming on line in 2025.

CFS expects the device to achieve a burning plasma—a self-sustaining fusion reaction—and become the world’s first net energy (Q>1) fusion system. The newly released papers reflect more than two years of work by CFS and the Plasma Science and Fusion Center to refine their design. According to CFS, the papers apply the same physics rules and simulations used to design ITER, now under construction in France, and predict, based on results from existing experiments, that SPARC will achieve its goal of Q>2. In fact, the papers describe how, under certain parameters, SPARC could achieve a Q ratio of 10 or more.

Routine refueling of the HFIR in July 2015. Photo: Genevieve Martin/ORNL

This summer, the Department of Energy’s Basic Energy Sciences Advisory Committee (BESAC) completed a report, The Scientific Justification for a U.S. Domestic High-Performance Reactor-Based Research Facility, that recommends the DOE begin preparing to replace the pressure vessel of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory and to convert the facility to use low-enriched uranium fuel. It also recommends that work begin that could lead to a new research reactor. An article published on the American Institute of Physics website summarizes the report, which was requested by the DOE in 2019.

The House of Representatives on September 29 unanimously passed three bills aimed at strengthening the cybersecurity of the U.S. electric grid and other energy infrastructure. The legislation now moves to the Senate for consideration.

The Russian nuclear-powered icebreaker Arktika. Photo: Rosatom

The Arktika, Russia’s latest nuclear-powered icebreaker, sailed from the Baltic Shipyard in St. Petersburg last week, bound for the Murmansk seaport. The voyage is scheduled to take approximately two weeks, during which time the vessel will be tested “in ice conditions,” according to Rosatom, Russia’s state-owned atomic energy corporation.

Cutaway of the SPARC engineering design. Image: CFS/MIT-PSFC, CAD Rendering by T. Henderson

A special issue of the Journal of Plasma Physics gives a glimpse into the physics basis for SPARC, the DT-burning tokamak being designed by a team from the Massachusetts Institute of Technology and Commonwealth Fusion Systems. The special issue was announced in a September 29 post on the Cambridge University Press blog Cambridge Core.

The special JPP issue includes seven peer-reviewed articles on the SPARC concept, which takes advantage of recent breakthroughs in high-temperature superconductor technology to burn plasma in a compact tokamak design.

Darlington nuclear generating station. Photo: OPG

Ontario Power Generation, its subsidiary Laurentis Energy Partners, and BWXT ITG Canada and its affiliates announced on September 24 that the companies are making “significant progress” toward the production of molybdenum-99 at OPG’s Darlington nuclear power plant. Darlington will become the first commercial operating nuclear reactor to produce the medical radioisotope.

A precursor to technetium-99m, Mo-99 is used in more than 40 million procedures a year to detect cancers and diagnose various medical conditions.

IAEA Director General Rafael Grossi and Teodolinda Coelho, Angola’s ambassador. Photo: IAEA

Grossi and Roger Albéric Kacou, Côte d’Ivoire’s ambassador. Photo: IAEA

Angola and Côte d’Ivoire deposited legal instruments with the International Atomic Energy Agency earlier this week, expressing their consent to be bound by treaties designed to strengthen nuclear safety and security.

On the sidelines of the IAEA’s 64th General Conference, Angola joined the Convention on Nuclear Safety and the Convention on the Physical Protection of Nuclear Material (CPPNM), as well as the latter’s 2005 amendment, while Côte d’Ivoire joined the Convention on Early Notification of a Nuclear Accident and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency.

Representing Angola and Côte d’Ivoire at the September 21 event were their respective ambassadors to Austria: Teodolinda Coelho and Roger Albéric Kacou.

The proposed Versatile Test Reactor complex would cover about 20 acres. Image: INL

Now that the Department of Energy has approved Critical Decision 1 for the Versatile Test Reactor (VTR) project, the engineering design phase can begin once Congress appropriates funding, according to a September 23 announcement from the DOE’s Office of Nuclear Energy. The DOE has requested $295 million for the project in fiscal year 2021.

The news came nearly one month after a team led by Bechtel National Inc. (BNI), and including GE Hitachi Nuclear Energy (GEH) and TerraPower, entered into contract negotiations with Battelle Energy Alliance (BEA) for the design-and-build phase of the VTR. GEH’s sodium-cooled fast reactor PRISM technology was selected to support the VTR program in November 2018.

The Nuclear Regulatory Commission announced on September 21 that based on a review of 141 research and development grant proposals, it anticipates awarding more than $7.25 million in funding to 15 of the peer-reviewed proposals. The funding is part of the $16 million appropriated by Congress in fiscal year 2020 under the Integrated University Program.

While independent NRC review panels recommended the 15 R&D proposals for funding, the NRC’s Office of Nuclear Regulatory Research will make a final decision on the awards.

A virtual side event at the 64th General Conference of the International Atomic Energy Agency will spotlight U.S. reactor technologies. The free event, US Reactor Technologies: Flexible Energy Security for Real-World Challenges, will be held this Thursday, September 24, from 9:00 a.m. to 10:30 a.m. (EDT).

The event will highlight the capabilities of small modular reactors and other innovative reactors for addressing countries’ current needs. It will also examine anticipated challenges in the future, as well as underscore the need to act now.

The event is sponsored by the U.S. Department of Energy’s Office of Nuclear Energy. Advanced registration is required.

The board of directors of the Energy Communities Alliance (ECA), an organization known more for its work in advancing the cleanup of Department of Energy sites, is launching a new initiative aimed at supporting the development of new nuclear technologies. As announced by the ECA on September 15, the self-funded, one-year initiative will focus on small modular reactors, micro and advanced reactors, a skilled nuclear workforce, and new nuclear missions around DOE facilities. facilities.

“With growing bipartisan support for nuclear energy in Congress, new federal demonstration projects led by DOE and the Department of Defense, and notable investment from the private sector, local governments want to be meaningfully engaged—and prepared—to match the strengths and needs of our communities with new nuclear opportunities,” the ECA said in its announcement.

The NSTX-U “umbrella.” Photo: Elle Starkman/ PPPL Office of Communications

The Department of Energy on September 8 announced funding for research at the National Spherical Tokamak Experiment Upgrade (NSTX-U), an Office of Science user facility at the DOE’s Princeton Plasma Physics Laboratory in Princeton, N.J.

Total planned funding is $17 million for the NSTX-U work over five years in duration. As much as $6 million in fiscal year 2020 dollars and out-year funding could be available this year, contingent on congressional appropriations and satisfactory progress.

The initiative will support experiments, data analysis, and computer modeling and simulation of plasma behavior. A major focus will be on the start of laying the scientific groundwork for a next-generation facility through better understanding of the behavior of plasmas in spherical tokamaks, the DOE said.

Canadian Nuclear Laboratories (CNL) on September 3 announced a research collaboration agreement with Kairos Power. Funded through CNL’s Canadian Nuclear Research Initiative (CNRI), the agreement includes research and engineering for technologies to separate, analyze, and store the tritium that would be created during the operation of Kairos Power’s proposed fluoride-salt–cooled small modular reactor.

The Department of Energy announced on September 2 that it has issued $29 million in funding for 14 projects as part of its Galvanizing Advances in Market-aligned fusion for an Overabundance of Watts (GAMOW) program, which is jointly sponsored by the department’s Advanced Research Projects Agency–Energy (ARPA-E) and the Office of Science–Fusion Energy Sciences (SC-FES).

According to the DOE, GAMOW teams will work to close multiple fusion-specific technological gaps that will be needed to connect a net-energy-gain “fusion core,” once it is ready, to a deployable, commercially attractive fusion system.

Idaho National Laboratory’s Transient Reactor Test Facility, also known as TREAT, returned to service in 2017 after a hiatus of more than two decades. To make full use of TREAT’s capabilities, researchers at INL created the Minimal Activation Retrievable Capsule Holder (MARCH) test vehicle system, which, according to an August 26 Department of Energy press release, can cut years off the development process for nuclear fuels and materials and allow new clients, like NASA, to take advantage of TREAT’s capabilities.

Artist’s rendering of the Versatile Test Reactor. INL Image

A team led by Bechtel National Inc. (BNI) that includes GE Hitachi Nuclear Energy (GEH) and TerraPower is in contract negotiations with Battelle Energy Alliance (BEA) for the design-and-build phase of the Versatile Test Reactor, BEA announced on August 24. As planned, the VTR would support irradiation testing of fuels, materials, and equipment designed for advanced reactors.

The Department of Energy on August 19 announced several awards to research teams applying artificial intelligence and machine learning to fusion energy. The planned total funding of $21 million is targeted at projects with time frames of up to three years; $8 million in fiscal year 2020 funding has already been committed to the work. Delivery of the balance-of-project funding will depend on future congressional appropriations.

“These awards will enable fusion researchers to take advantage of recent rapid advances in artificial intelligence and machine learning,” said Chris Fall, director of the DOE’s Office of Science. “AI and ML will help us to accelerate progress in fusion and keep American scientists at the forefront of fusion research.”

This flowchart is housed in a library of Sankey diagrams at flowcharts.llnl.gov and is also available as a PDF. Source: Department of Energy/LLNL, based on EIA data

Every year, Lawrence Livermore National Laboratory releases flowcharts illustrating U.S. energy consumption and use. The flowcharts, called Sankey diagrams, allow scientists, analysts, and other decision makers to compare the contributions made by various energy sources, including nuclear power, and the end uses of those sources, including residential, industrial, commercial, and transportation markets. Taken as a series of annual snapshots, energy use trends and opportunities quickly become apparent.

This year, in addition to releasing the 2019 energy flowchart, the lab issued state-by-state energy flowcharts for 2015–2018 and carbon emissions charts for 2014–2017. It is currently at work on charts of international energy use that it hopes to release by the end of the year.

Fuel compact cross section showing dozens of individual TRISO particles.

Tristructural isotropic (TRISO) coated particle fuel is a robust, microencapsulated fuel form developed originally for use in high-temperature gas-cooled reactors (HTGRs). The particles consist of a spherical fissile kernel surrounded by several layers of pyrocarbon and a silicon carbide (SiC) layer. The particles are formed into cylindrical or spherical fuel forms using a resinated graphite matrix material for insertion into an HTGR. The kernel and coating layers together act to retain fission products within the particle during normal reactor operation and during postulated accidents; TRISO particles can maintain structural integrity at extremely high temperatures, reaching as high as approximately 1,600 °C in limiting HTGR accidents. This limits the fission product activity circulating in the helium coolant and the activity released to the environment during accidents. Acceptable performance of TRISO particles is therefore essential for reactor safety.