NRC grants Duane Arnold emergency planning exemptions
NextEra Energy will be allowed to revise the emergency preparedness plan for its Duane Arnold nuclear power plant to reflect the plant’s decommissioning status, having been granted exemptions from the Nuclear Regulatory Commission’s emergency preparedness and planning requirements, the agency announced on February 17. A single-unit boiling water reactor plant located in Palo, Iowa, approximately eight miles northwest of Cedar Rapids, Duane Arnold was shut down in August 2020 after a derecho damaged the plant’s cooling towers.
The NRC regularly issues exemptions from its licensing requirements to nuclear power plants that are transitioning to decommissioning, where the risk of an off-site radiological release is significantly lower, and the types of possible accidents significantly fewer, than at an operating reactor.
Once NextEra implements the exemptions, state and local governments can rely on comprehensive emergency management (“all hazard”) planning for off-site emergency response should an event occur at Duane Arnold. As a result, there will not be a 10-mile emergency planning zone as currently identified in Duane Arnold’s license. The plant will maintain an on-site emergency plan and response capabilities, including the continued notification of state government officials in the event of an emergency declaration.

Maybe everything really is bigger in Texas, but that’s not necessarily a good thing. The brutal winter storm that hit much of the country earlier this week struck the Lone Star State with particular severity, leaving the power grid in shambles and millions of Texas residents without power, in many instances for days. On Tuesday, at the height of the power crisis, more than 4.4 million utility customers were without access to electricity, according to 


ANSI/ASME/ANS RA-S-1.4-2021, “Probabilistic Risk Assessment Standard for Advanced Non-Light Water Reactor Nuclear Power Plants,” has just been issued. Approved by the American National Standards Institute (ANSI) on January 28, 2021, this joint American Society of Mechanical Engineers (ASME)/American Nuclear Society (ANS) standard sets forth requirements for probabilistic risk assessments (PRAs) used to support risk-informed decisions for commercial nuclear power plants and prescribes a method for applying these requirements for specific applications.
A recent article from 