X-energy, developer of the Xe-100 small modular reactor, has delivered the first of four sets of equipment for the Xe-100 reactor protection system (RPS) prototype, marking the latest milestone in the company’s efforts under the Department of Energy’s Advanced Reactor Demonstration Program (ARDP).

The U.S. Department of Defense (DOD) is looking to reduce its reliance on local electric grids and diesel-fueled generators at military installations. Project Pele is designed to demonstrate the technical and safety features of mobile microreactors capable of generating up to 5 MWe.

When I came to work at BWX Technologies immediately after getting my degree in chemical engineering from the University of Virginia, I was amazed to see how nuclear energy could be harnessed to both power and protect our country. Since then, I’ve come to see that nuclear energy can do even more. The nuclear industry’s next tasks are to address climate change, propel us to other bodies in the solar system, and provide power when we arrive. Recently developed coated fuels are an enabling technology for these tasks.

Positioning nuclear power to combat climate change requires the rollout of advanced reactors to replace carbon-­emitting power generation. That necessity, and its urgency, is reflected in recent budget proposals for the Department of Energy’s Office of Nuclear Energy. Part of that proposed funding focuses on deploying new fuel technologies.

Metallic fuels, which are alloys of fissionable material, offer several advantages, including more fuel-­efficient reactors with a double or greater fuel burnup than the oxide fuels found in light water reactors. Fuel fabrication is also more cost-­effective with metallic fuels than with oxide fuels. Furthermore, much of the research and development effort needed to qualify these metallic fuels has been done.

BWX Technologies announced on January 24 that it has been awarded a $4.9 million contract amendment to produce TRISO fuel particles using natural uranium and to demonstrate performance under a defined production schedule. BWXT’s Nuclear Operations Group will perform the work at BWXT’s Lynchburg, Va., facility, where TRISO production was restarted in November 2020. The contract amendment was awarded by Battelle Energy Alliance, which manages Idaho National Laboratory on behalf of the Department of Energy.

X-energy, the Rockville, Md.–based developer of the Xe-100 small modular reactor, announced on December 15 that X-energy Canada has signed a memorandum of understanding with the First Nations Power Authority (FNPA) to look for ways to build “Indigenous capacity” for the future SMR industry in Canada.

Nuclear thermal propulsion (NTP) is one technology that could propel a spacecraft to Mars and back, using thermal energy from a reactor to heat an onboard hydrogen propellant. While NTP is not a new concept, fuels and reactor concepts that can withstand the extremely high temperatures and corrosive conditions experienced in the engine during spaceflight are being designed now.

BWX Technologies announced on December 13 that it has delivered coated reactor fuels to NASA for testing in support of the Space Technology Mission Directorate’s NTP project. BWXT is developing two fuel forms that could support a reactor ground demonstration by the late 2020s, as well as a third, more advanced and energy-dense fuel for potential future evaluation. BWXT has produced a videoof workers processing fuel kernels in a glovebox.

Mignogna

The world faces an urgent need to decarbonize and expand clean energy systems. Earlier this year, the United States announced goals to achieve a 100 percent clean electricity grid by 2035 and net-zero emissions across the entire economy by 2050. Today, nuclear energy plants provide more than 50 percent of the United States’ carbon-free energy. Existing plants, along with the advanced technologies currently being developed and demonstrated, are crucial to the United States’ and the world’s clean energy future.

Technologies such as advanced non-light water reactors, which have higher operating temperatures than today’s light water reactors, will be vital to meeting economy-wide decarbonization goals. For example, process heat applications and chemical and synthetic fuel production require higher temperatures and currently rely on fossil fuels. Advanced reactors are the only carbon-free technologies that can provide the high temperatures these processes need.

X-energy and Centrus Energy announced last week that they have completed the preliminary design of the TRISO-X fuel fabrication facility and have signed a contract for the next phase of work. The planned facility would produce TRISO fuel particles and pack those particles into fuel forms, including the spherical graphite “pebbles” needed to fuel X-energy’s Xe-100 high-temperature gas reactor.

X-energy and Centrus Energy Corporation yesterday announced the completion of the preliminary design for X-energy’s TRISO-X Fuel Fabrication Facility, plus the signing of a contract for Centrus to continue its work as the project enters its next phase.

Canadian Nuclear Laboratories (CNL) last week issued a call for proposals for the third round of its Canadian Nuclear Research Initiative (CNRI) program.

More information about the program, including application details, can be found online.

Global First Power’s (GFP) Micro Modular Reactor (MMR) project has moved to the formal license review phase with the Canadian Nuclear Safety Commission (CNSC), becoming the first small modular reactor to do so.

The Tennessee Valley Authority and nuclear technology and engineering company Kairos Power this morning announced plans to collaborate on the deployment of the latter’s low-power demonstration reactor, dubbed Hermes, at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tenn. TVA will provide engineering, operations, and licensing support to help Kairos with deployment, according to the announcement.

The final text of the approximately 5,600-page Consolidated Appropriations Act 2021 was released on December 22. While the timing of final passage is still fluid, the Senate was expected to approve it and send it on to President Trump to sign into law, according to John Starkey, American Nuclear Society government relations director.

Below are some key funding highlights from the legislation pertaining to nuclear energy.

An aerial view of the ETTP site. Photo: Heritage Center, LLC

Kairos Power plans to site a test reactor it has dubbed Hermes at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tenn. The company has executed a Memorandum of Understanding with Heritage Center, LLC, to acquire the former K-33 gaseous diffusion plant site at ETTP, subject to ongoing due diligence evaluations. The announcement was made today, during the 2020 East Tennessee Economic Council Annual Meeting and Awards Celebration.

“We are thrilled at the prospect of coming to East Tennessee,” said Michael Laufer, cofounder and chief executive officer of Kairos Power. “The infrastructure available at ETTP, combined with its proximity to key collaborators at the Oak Ridge National Laboratory, makes this a great location to demonstrate our technology. The successful commissioning of Hermes builds on our current technology development programs and extensive engagement with the U.S. Nuclear Regulatory Commission. Ultimately, Hermes will prove that Kairos Power can deliver real systems at our cost targets to make advanced nuclear a competitive source of clean energy in the United States.”

Lou Martinez, vice president of strategy and innovation, added, “Today is an important day for Kairos Power. We are celebrating our 4th anniversary by showcasing an important milestone.”

BWX Technologies Inc. announced on November 10 that its BWXT Nuclear Operations Group Inc. (BWXT NOG) subsidiary has completed its TRISO nuclear fuel line restart project and is actively producing fuel at its Lynchburg, Va., facility.

With the restart, BWXT now manufactures fuel across four commercial and government business lines, the company said. In addition to the TRISO line, BWXT operates fuel production lines at BWXT Nuclear Energy Canada, manufacturer of approximately half of the fuel powering the commercial reactor fleet in Ontario, Canada; BWXT subsidiary Nuclear Fuel Services, sole provider of nuclear fuel for the U.S. Navy; and BWXT’s Uranium Processing and Research Reactors operation, the only North American supplier of research reactor fuel elements for colleges, universities, and national laboratories.

Canadian Nuclear Laboratories (CNL) on September 3 announced a research collaboration agreement with Kairos Power. Funded through CNL’s Canadian Nuclear Research Initiative (CNRI), the agreement includes research and engineering for technologies to separate, analyze, and store the tritium that would be created during the operation of Kairos Power’s proposed fluoride-salt–cooled small modular reactor.

The House Appropriations Committee held its full committee markup of the Energy and Water Development bill on July 13. (The Bill Report provides a more detailed funding breakdown.) The final bill passed the committee by a party line vote of 30-21. No schedule for Floor consideration of the bill has been set, but it is likely to happen next week or the week after.

BWX Technologies has signed a $26-million, 20-month contract to expand and upgrade its TRISO fuel manufacturing line. The recently announced deal, awarded by Idaho National Laboratory, calls for the expansion of BWXT’s capacity for the manufacture of TRISO fuel compacts and the upgrading of existing systems for delivering production-scale quantities of TRISO fuel.

BWX Technologies has announced the successful formation and sintering of uranium oxycarbide (UCO) fuel kernels that, once coated, will make up the fissile core of TRISO (tristructural isotropic) fuel particles. With that process demonstrated, BWXT has shifted the focus of its TRISO production restart to bringing two more furnaces online—an additional sintering furnace, used to apply heat and pressure to a solid fuel kernel, and a coating furnace.