Scientists at the DIII-D National Fusion Facility have published research on a compact fusion reactor design they say could be used to develop a pilot-scale fusion power plant. According to General Atomics (GA), which operates DIII-D as a national user facility for the Department of Energy’s Office of Science, the Compact Advanced Tokamak (CAT) concept uses a self-sustaining configuration that can hold energy more efficiently than in typical pulsed configurations, allowing the plant to be built at a reduced scale and cost.

Icenhour

Alan S. Icenhour, an ANS member since 2002 and a Fellow, has been named deputy for operations at the Department of Energy’s Oak Ridge National Laboratory. He succeeds Jeff Smith, who is retiring this spring after serving in the role since UT-Battelle began operating the lab in 2000.

Background: Icenhour joined ORNL in 1990 as an engineer and served most recently as associate laboratory director for the Isotope Science and Engineering Directorate. He led the Nuclear Science and Engineering Directorate from 2014 until the isotopes directorate was formed in October 2020, and he has held a variety of other leadership positions as well as an assignment as senior technical adviser to the National Nuclear Security Administration.

Workers with the Department of Energy’s Office of Environmental Management (EM) recently began demolishing the last facility standing in the former Biology Complex at the Y-12 National Security Complex at the Oak Ridge Reservation in Tennessee.

As announced by EM on March 23, removal of the massive six-story, 255,000-square-foot Building 9207 creates a new chapter of transformation and modernization for Y-12. Completion of the Biology Complex demolition is one of EM’s 2021 priorities.

According to EM, the facilities in the Biology Complex presented significant structural risks due to their deterioration, and their condition landed them on DOE’s list of high-risk excess contaminated facilities.

Technicians use a manipulator arm in a shielded cave in ORNL’s Radiochemical Engineering Development Center to separate concentrated Pm-147 from by-products generated through the production of Pu-238. Photo: Richard Mayes/ORNL, DOE

A method developed at Oak Ridge National Laboratory is allowing the Department of Energy to cull promethium-147 from plutonium-238 produced for space exploration. Under an ORNL project for the DOE Isotope Program that began last year, the lab has been mining Pm-147, a rare isotope used in nuclear batteries and to measure the thickness of materials, from the fission products left when Pu-238 is separated out of neptunium-237 targets. The Np-237 targets are irradiated in Oak Ridge’s High Flux Isotope Reactor, a DOE Office of Science user facility, to produce the Pu-238.

According to the DOE, the primary goal of the project is to reestablish the domestic production of Pm-147, which is in short supply. As a side benefit, the project is reducing the concentrations of radioactive elements in the waste so that it can be disposed of safely in simpler, less expensive ways, both now and in the future.

“In the process of recovering a valuable product that the DOE Isotope Program wants, we realized we can reduce our disposal costs,” said Richard Mayes, group leader for ORNL’s Emerging Isotope Research. “There’s some synergy.”

A replacement rotor is lifted and staged for the upcoming Browns Ferry-2 turbine work. Photo: TVA

The Tennessee Valley Authority has begun a refueling and maintenance outage at Browns Ferry-2 that includes the largest scope of turbine deck work since the unit’s construction, as well as innovations in fuel assembly components, the utility announced on March 1.

On deck: All three of the 1,254.7-MWe boiling water reactor’s low-pressure turbines will undergo a comprehensive replacement of major components, including new rotors, inner casings, steam piping and bellows, and turbine supervisory instruments, requiring the support of more than 500 additional outage workers. TVA said that 600 crane lifts will need to be performed for some components, such as the rotors, which weigh up to 327,888 lb., and inner casings, which weigh up to 200,000 lb.

A view of the demolition of a hot cell inside a protective cover at the former radioisotope development lab at ORNL. Photo: DOE

The Department of Energy’s Oak Ridge Office of Environmental Management and contractor UCOR have begun removing the two remaining structures at the former radioisotope development laboratory at Oak Ridge National Laboratory, in Tennessee.

“This project launches our next phase of major demolition and cleanup at ORNL,” said Nathan Felosi, ORNL’s portfolio federal project director for OREM. “Our work is eliminating contaminated structures, like this one, that are on DOE’s list of high-risk facilities and clearing space for future research missions.”

The project is scheduled to be completed this spring, OREM reported on February 23.

This high-resolution still image is from a video taken by several cameras as NASA’s Perseverance rover touched down on Mars on February 18. Credits: NASA/JPL-Caltech

NASA’s Perseverance rover, which successfully landed on Mars on February 18, is powered in part by the first plutonium produced at Department of Energy laboratories in more than 30 years. The radioactive decay of Pu-238 provides heat to radioisotope thermoelectric generators (RTGs) like the one onboard Perseverance and would also be used by the Dynamic Radioisotope Power System, currently under development, which is expected to provide three times the power of RTGs.

Idaho National Laboratory is scaling up the production of Pu-238 to help meet NASA’s production goal of 1.5 kg per year by 2026, the DOE announced on February 17.

Members of the Perseverance rover team in Mission Control at NASA’s Jet Propulsion Laboratory react after receiving confirmation of a successful landing. Photo: NASA/Bill Ingalls

NASA mission control and space science fans around the world celebrated the safe landing of the Mars 2020 Perseverance rover on February 18 after a journey of 203 days and 293 million miles. Landing on Mars is difficult—only about 50 percent of all previous Mars landing attempts have succeeded—and a successful landing for Perseverance, the fifth rover that NASA has sent to Mars, was not assured. Confirmation of the successful touchdown was announced at NASA’s Jet Propulsion Laboratory in Pasadena, Calif., at 3:55 p.m. EST.

“This landing is one of those pivotal moments for NASA, the United States, and space exploration globally—when we know we are on the cusp of discovery and sharpening our pencils, so to speak, to rewrite the textbooks,” said acting NASA administrator Steve Jurczyk. “The Mars 2020 Perseverance mission embodies our nation’s spirit of persevering even in the most challenging of situations, inspiring, and advancing science and exploration. The mission itself personifies the human ideal of persevering toward the future and will help us prepare for human exploration of the Red Planet.”

Only radioisotope thermoelectric generators (RTG) can provide the long-lasting, compact power source that Perseverance needs to carry out its long-term exploratory mission. Perseverance carries an RTG powered by the radioactive decay of plutonium-238 that was supplied by the Department of Energy. ANS president Mary Lou Dunzik-Gougar and CEO and executive director Craig Piercy congratulated NASA after the successful landing, acknowledging the critical contributions of the DOE’s Idaho National Laboratory, Oak Ridge National Laboratory, and Los Alamos National Laboratory.

Crews cleaned and demolished COLEX equipment on the west end of the Alpha-4 building at the Y-12 National Security Complex. Photo: DOE

The Department of Energy’s Oak Ridge Office of Environmental Management and its contractor UCOR have found a way to reuse instead of dispose of mercury collected from a cleanup project at the Y-12 National Security Complex, near Oak Ridge National Laboratory in Tennessee. “This questioning attitude and innovative thinking by our workforce is a major contributor to how our program is able to accomplish its projects under budget and ahead of schedule on a consistent basis,” said OREM manager Jay Mullis.

The DOE is conducting a number of projects to address mercury contamination—the most significant environmental risk is at Y-12, according to the agency. The work includes the cleanout and removal of equipment at Y-12's Alpha-4, a building that was used initially for uranium separation in 1944 and 1945. Ten years later, the building started being used for lithium separation, a process that required large amounts of mercury and involved column exchange (COLEX) equipment. Over the years, a significant amount of mercury from the process leached into the equipment, buildings, and surrounding soils.

An aerial view of the ETTP site. Photo: Heritage Center, LLC

Kairos Power plans to site a test reactor it has dubbed Hermes at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tenn. The company has executed a Memorandum of Understanding with Heritage Center, LLC, to acquire the former K-33 gaseous diffusion plant site at ETTP, subject to ongoing due diligence evaluations. The announcement was made today, during the 2020 East Tennessee Economic Council Annual Meeting and Awards Celebration.

“We are thrilled at the prospect of coming to East Tennessee,” said Michael Laufer, cofounder and chief executive officer of Kairos Power. “The infrastructure available at ETTP, combined with its proximity to key collaborators at the Oak Ridge National Laboratory, makes this a great location to demonstrate our technology. The successful commissioning of Hermes builds on our current technology development programs and extensive engagement with the U.S. Nuclear Regulatory Commission. Ultimately, Hermes will prove that Kairos Power can deliver real systems at our cost targets to make advanced nuclear a competitive source of clean energy in the United States.”

Lou Martinez, vice president of strategy and innovation, added, “Today is an important day for Kairos Power. We are celebrating our 4th anniversary by showcasing an important milestone.”

An accident tolerant fuel experiment developed by Global Nuclear Fuel arrives at Oak Ridge National Laboratory for testing. Photo: ORNL

Global Nuclear Fuel (GNF) has announced that irradiated lead test assemblies of its IronClad and ARMOR accident tolerant fuel (ATF) have been delivered to Oak Ridge National Laboratory for examination. The unfueled IronClad rods and fueled ARMOR rods, the first ATF samples to be installed in a commercial reactor, completed a 24-month fuel cycle at the Hatch nuclear plant near Baxley, Ga., in February and were shipped to ORNL in early November.

The test samples, manufactured at GNF’s facility in Wilmington, N.C., are part of an industry-led effort with the Department of Energy to commercialize new fuels that could help boost the performance and economics of U.S. reactors within the decade. Framatome and Westinghouse are also involved in the DOE’s ATF program.

According to GNF’s December 3 announcement, ORNL’s examination of the samples will include visual inspections, microscopy, and measurements of the thickness, corrosion, and other mechanical and material properties of the cladding. These data, GNF said, will be used to determine the performance benefits of the materials and support the licensing of new fuel technologies with the Nuclear Regulatory Commission.

The DOE’s Office of Nuclear Energy noted in a December 4 press release that initial visual inspections of the test samples showed no visible signs of flaws or degradation on either of the assemblies.

Fabricated yttrium hydride samples are pulled out of the system. Photo: ORNL

Oak Ridge National Laboratory scientists have developed a method to produce solid yttrium hydride for use as a moderator for the Transformational Challenge Reactor (TCR), a 3-MWt additively manufactured microreactor that ORNL aims to demonstrate by 2023. Lacking a commercial supply of the metal hydride, ORNL scientists developed a system to produce yttrium hydride in large quantities and to exacting standards.

The hydrogen density and moderating efficiency of metal hydrides—which combine a rare earth metal with hydrogen—could enable smaller reactor cores that can operate more efficiently and reduce waste products, according to ORNL. The material could be used in other advanced reactor designs, including space power and propulsion systems for NASA, and has been proposed as a shield component for thermalization and neutron absorption in fast-spectrum nuclear reactors.

OREM and cleanup contractor UCOR are set to fully deactivate the Experimental Gas-Cooled Reactor at Oak Ridge for eventual demolition. Photo:DOE

With work recently completed on the removal of a former uranium enrichment complex at the East Tennessee Technology Park (ETTP), the Department of Energy is shifting focus to other remediation projects around the Oak Ridge National Laboratory. On October 27, the DOE announced that the Oak Ridge Office of Environmental Management (OREM) is set to begin cleanup of the Experimental Gas-Cooled Reactor at the site.

OREM and cleanup subcontractor UCOR are in the planning stages to fully deactivate the reactor for eventual demolition. The reactor is one of 16 inactive research reactors and isotope facilities that OREM is addressing and cleaning up at Oak Ridge. The cleanup effort will happen concurrently with other OREM cleanup projects underway at the Y-12 National Security Complex in Oak Ridge.

Routine refueling of the HFIR in July 2015. Photo: Genevieve Martin/ORNL

This summer, the Department of Energy’s Basic Energy Sciences Advisory Committee (BESAC) completed a report, The Scientific Justification for a U.S. Domestic High-Performance Reactor-Based Research Facility, that recommends the DOE begin preparing to replace the pressure vessel of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory and to convert the facility to use low-enriched uranium fuel. It also recommends that work begin that could lead to a new research reactor. An article published on the American Institute of Physics website summarizes the report, which was requested by the DOE in 2019.

The Department of Energy established the Consortium for Advanced Simulation of Light Water Reactors (CASL) at Oak Ridge National Laboratory in 2010 as a national collaboration of government, academia, and industry to help the nuclear industry extend the life of the current reactor fleet and develop more efficient next-generation reactors. On August 13, ORNL issued a news release and video to celebrate the achievements of CASL, which concluded its mission in June.

ANS and the Young Members Group are offering the next installment of the “Spotlight on the National Labs” webinar series, featuring Oak Ridge National Laboratory. The webinar takes place on August 12, starting at 1:30 p.m. (EDT).

Registration for the webinar is required.

Overlapping X-ray data of the SARS-CoV-2 main protease shows structural differences between the protein at room temperature (orange) and the cryogenically frozen structure (white). Graphic: Jill Hemman/ORNL, U.S. Dept. of Energy

A team of researchers at the Department of Energy’s Oak Ridge and Argonne national laboratories has performed the first room-temperature X-ray measurements on the SARS-CoV-2 main protease, the enzyme that enables the virus to reproduce.

The X-ray measurements mark an important first step in the researchers’ ultimate goal of building a comprehensive 3D model of the enzymatic protein.

The final plenary session of the American Nuclear Society's 2020 Virtual Annual Meeting was the General Chair’s Special Session, held on Wednesday, June 10. The session contained much information about the current and future role of advanced reactor technology. The session, with the subtitle “The Promise of Advanced Reactors during Uncertain Times: National Security, Jobs and Clean Energy,” featured two panels: the Lab Directors Roundtable and the Advanced Reactor Panel. The general chair is Mark Peters, Idaho National Laboratory director. The session was moderated by Corey McDaniel, of Idaho National Laboratory, and the assistant general chair of the Annual Meeting.

A few of the issues covered during the dual plenary session included challenges to advanced reactor deployment, public-private partnerships in research and development, nuclear non-proliferation and security, workforce issues, and market conditions and demand.

The 1,250-ton cryostat base is positioned over the ITER tokamak pit for installation. The base is the heaviest lift of the tokamak assembly. Photo: ITER

ITER, the world’s largest international scientific collaboration, is beginning the assembly of the fusion reactor tokamak that will include 12 essential hardware systems provided by US ITER, which is managed by Oak Ridge National Laboratory. The first major machine element to be installed is the 1,250-ton base of the cryostat, which was placed into the tokamak assembly pit on May 26. ITER is located in southeastern France.