Canada’s Bruce Power, operator of the eight-unit Bruce nuclear power plant in Kincardine, Ontario, is undertaking a series of environmental initiatives to help attain its goal, announced in March, to achieve net-zero greenhouse gas emissions from site operations by 2027.

The first of eight 160-ton steam generators for Unit 6 at Canada’s Bruce nuclear power plant was installed last week as part of the facility’s major component replacement project. “Congrats to the MCR team and our partners, including @AeconGroup, @Framatome_CA, @UEandC, @mammoetglobal, @BWXT, and others who contributed to this historic moment,” Bruce Power tweeted on September 30.

The component was fabricated at BWXT Canada’s Cambridge, Ontario, location and was shipped to the Bruce site in late 2020, as shown in this video.

The vendor responsible for generator removal is the Steam Generator Replacement Team (SGRT), a 50-50 joint venture between Aecon and the Steam Generating Team, itself a partnership between Framatome and United Engineers & Constructors. In July, Framatome announced that SGRT had been awarded an approximately C$350 million (about $278 million) contract by Bruce Power to replace the steam generators at Units 3 and 4.

Bruce Power has received approval from the Canadian Nuclear Safety Commission (CNSC) to begin the production of lutetium-177, becoming the first power reactor globally to commercially produce the medical radioisotope. Isogen, a joint venture between Framatome and Kinectrics, will produce Lu-177 at Bruce’s eight-unit CANDU nuclear power plant in Ontario, Canada, using Isogen’s isotope production system (IPS).

Bruce Power has removed the first of eight steam generators from Unit 6 at the Bruce nuclear plant in Ontario, the company announced earlier this week. The work was done as part of the facility’s major component replacement (MCR) project.

The Nuclear Innovation Institute (NII) has launched a study on the role of nuclear power in supporting a growing hydrogen economy. The study will be the first of its kind in Canada to evaluate the technical viability and business case for hydrogen production from nuclear power, according to NII, an Ontario, Canada–based nonprofit formed in 2018 to accelerate innovation in the nuclear industry.

Alberta Premier Jason Kenney has added his signature to a memorandum of understanding on small modular reactor development that was signed in 2019 by the premiers of New Brunswick, Ontario, and Saskatchewan. Kenney signed the document last week at a virtual event that also promoted the release of Feasibility of Small Modular Reactor Development and Deployment in Canada—a study formally requested as part of the MOU.

Advanced reactor developers see potential markets for reactors in a range of sizes that offer clean, reliable, flexible, and cost-competitive power. Many have reached agreements with suppliers, utilities, and others to support the demonstration and possible deployment of their designs. Nuclear News is following these activities. Read on for updates and check back with Newswire often for more on the Advanced Reactor Marketplace.

Canada has invested Can$20 million in Terrestrial Energy’s 195-MW Integral Molten Salt Reactor through the Ministry of Innovation, Science and Industry, the company announced on October 15. In accepting the investment, Terrestrial Energy, which is based in Oakville, Ontario, has committed to creating and maintaining 186 jobs and creating 52 co-op positions nationally. In addition, Terrestrial Energy is spending at least $91.5 million on research and development. According to the company, the funds will assist with the completion of a key pre-licensing milestone with the Canadian Nuclear Safety Commission.

Two days earlier, Terrestrial Energy USA and Centrus Energy announced that they had signed a memorandum of understanding to evaluate the logistical, regulatory, and transportation requirements to establish a fuel supply for Integral Molten Salt Reactor power plants, which would use standard-assay low-enriched uranium at an enrichment level less than 5 percent.

Bruce Power has harvested a second batch of Co-60 this year. Image: Bruce Power

Bruce Power announced on October 22 that it has completed its second harvest of cobalt-60 this year during an outage of Unit 8 of the Bruce nuclear power plant in Kincardine, Ontario, Canada. The company said that with this latest harvest, it will have provided the world enough of the medical isotope to sterilize 20 billion–25 billion pairs of gloves or COVID-19 swabs.

The Co-60 will be sent to Ottawa-based Nordion for processing and distribution over the next several weeks, according to Bruce Power. From there, the isotope will be shipped around the world for use in gamma irradiation to sterilize medical devices such as single-use gowns, surgical gloves, scalpels, syringes, and other critical health care equipment.

The Bruce nuclear power plant. Photo: Bruce Power

Speaking last week at a virtual event of the Empire Club of Canada, Bruce Power president and chief executive officer Mike Rencheck announced “NZ-2050”—the company’s strategy for helping Canada achieve its stated goal of net-zero emissions by 2050.

Canada’s only private sector nuclear generator, Bruce Power operates the Bruce Nuclear Generation Station, located in Kincardine, Ontario. The plant houses eight units, all CANDU pressurized heavy-water reactors, with a total output of 6,288 MWe.