American Nuclear Society
Home

Home / Publications / Journals / Fusion Science and Technology / Volume 29

Volume 29

Number 1 | Number 2 | Number 3 | Number 4

Number 1

Results of an International Study on a High-Volume Plasma-Based Neutron Source for Fusion Blanket Development

Mohamed A. Abdou, Sam E. Berk, Alice Ying, Y. K. Martin Peng, Shahram Sharafat, John D. Galambos, Glenn W. Hollenberg, Siegfried Malang, Eric Proust, Steven J. Booth, Luciano Giancarli, Patrick Lorenzetto, Yasushi Seki, V. V. Filatov, Guelli Shatalov, Alexander Sidorenkov

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 1-57

Technical Paper / Blanket Engineering

Material Requirements and Perspectives for Future Thermonuclear Fusion Reactors

A. Donato, R. Andreani

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 58-72

Technical Paper / Materials Engineering

Electrical Insulation and Conduction Coating for Fusion Experimental Devices

Masanori Onozuka, Seiji Tsujimura, Masahiko Toyoda, Masahiko Inoue, Tetsuya Abe, Yoshio Murakami

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 73-82

Technical Paper / Materials Engineering

Ultrasonic Irradiation of Deuterium-Loaded Palladium Particles Suspended in Heavy Water

Jacob Jorné

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 83-90

Technical Paper / Nuclear Reactions in Solid

Isotopic Water Handling and Hydrogen Isotope Recovery for Fusion Application Using the Zr(V0.5Fe0.5)2 Alloy — II: Conversion Behavior Under Water Vapor Flow Conditions

N. Venkataramani, F. Ghezzi, G. Bonizzoni, W. T. Shmayda

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 91-104

Technical Paper / Tritium System

Engineering Aspects of the Tokamak ISTTOK

C. A. F. Varandas, J. A. C. Cabral, J. T. Mendonça, M. P. Alonso, P. Amorim, B. B. Carvalho, C. Correia, L. Cupido, M. L. Carvalho, J. M. Dias, H. Fernandes, C. J. Freitas, S. Magalhāes, A. Malaquias, M. E. Manso, A. Praxedes, J. Santana, F. Serra, A. Silva, A. Soares, J. Sousa, W. van Toledo, P. Vaessen, P. Varela, S. Vergamota, B. de Groot†

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 105-115

Technical Paper / Experimental Device

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

T. Honda, T. Okazaki, K. Maki, T. Uda, Y. Seki, I. Aoki, T. Kunugi

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 116-125

Technical Paper / Safety/Environmental Aspect

Calculation of the Impact of n = 1 Error Fields on the Divertor Heat Loading of the Tokamak Physics Experiment

R. J. La Haye

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 126-133

Technical Paper / Divertor System

An Externally Guided Target for Inertial Fusion

J. M. Martínez-Val, M. Piera

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 134-170

Technical Paper / ICF Target

A Study of Energy Output from Implosion of a Reactor-Size Indirect Drive Reduced Tritium Inertial Fusion Target

N. A. Tahir, D. H. H. Hoffmann

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 171-177

Technical Paper / ICF Target

An Investigation of Reports of Fusion Reactions Occurring at the Cathode in Glow Discharges

C. H. Ellison, James A. Mahaffey

Fusion Science and Technology / Volume 29 / Number 1 / January 1996 / Pages 178-187

Technical Paper / Nuclear Data

Number 2

A Re-Examination of Spheromak Experiments and Opportunities

E. Bickford Hooper, James H. Hammer, Cris W. Barnes, Juan C. Fernández, Fred J. Wysocki

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 191-205

Technical Paper / Experimental Device

Theoretical Aspects of Energy Confinement in Spheromaks

T. Kenneth Fowler

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 206-209

Technical Paper / Plasma Engineering

Plasma Exhaust Purification by Thermal Swing Adsorption: Experimental Results and Modeling

I. Ricapito, C. Malara

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 219-231

Technical Paper / Fusion Fuel Cycle

A Control Method for the Cryogenic Distillation Column with a Feedback Stream

Toshihiko Yamanishi, Mikio Enoeda, Kenji Okuno, Robert H. Sherman

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 232-243

Technical Paper / Fusion Fuel Cycle

Collisionless Diffusion of Particles and Current Across a Magnetic Field in Beam/Plasma Interaction

G. Manfredi, M. Shoucri, I. Shkarofsky, A. Ghizzo, P. Bertrand, E. Fijalkow, M. Feix, S. Karttunen, T. Pattikangas, R. Salomaa

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 244-260

Technical Paper / Plasma Heating System

How to Produce the Pons-Fleischmann Effect

Edmund Storms

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 261-268

Technical Paper / Electrolytic Device

Sensitivity of Neutral Throughput to Geometry and Plasma Position in the Tokamak Physics Experiment Divertor Region

D. R. Juliano, D. N. Ruzic, D. Hill, K. A. Werley

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 269-276

Technical Paper / Divertor System

Low Loop Voltage Startup and Equilibrium Control Using Multivariable Poloidal Field Coils in the Hitachi Tokamak HT-2

Mitsushi Abe, Kazuhiro Takeuchi

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 277-293

Technical Paper / Plasma Engineering

Incorporating Safety and Environmental Aspects in Fusion Reactor Systems Studies-The Prerequisites, Impacts, and Applications

S. K. Ho, L. J. Perkins

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 294-301

Technical Paper / Safety/Environmental Aspect

The Microstructure of Electrolytically Deuterium-Loaded Palladium Rods

Swe-Kai Chen, Chi-Meen Wan, En-Hwei Liu, Shuh-Bair Chu, Chi-Yung Liang, Liq-Ji Yuan, Chi-Chiao Wan

Fusion Science and Technology / Volume 29 / Number 2 / March 1996 / Pages 302-305

Technical Note / Nuclear Data

Number 3

Evolution and Status of D-3He Fusion: A Critical Review

W. R. Fundamenski, A. A. Harms

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 313-349

Critical Review / Fusion Fuel Cycle

Shakedown and Ratcheting Analyses of Fusion Reactor First Wall

Saurin Majumdar, Joërg Wolters

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 353-364

Technical Paper / First-Wall Technology

Eddy Currents in the Toroidal Field Core of the Low-Aspect-Ratio Tokamak Start

R. J. Colchin

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 365-371

Technical Paper / Magnet System

In Situ Elastic Recoil Detection Analysis of Hydrogen Isotopes During Deuterium Implantation into Metals

Akira Kitamura, Takakazu Saitoh, Hiroshi Itoh

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 372-378

Technical Paper / Nuclear Reactions in Solid

Analysis of Heavy-Ion-Induced Deuteron-Deuteron Fusion in Solids

Kenji Konashi, Hideo Kayano, Makoto Teshigawara

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 379-384

Technical Paper / Nuclear Reactions in Solid

Anomalous Heat Evolution from a Solid-State Electrolyte Under Alternating Current in High-Temperature D2 Gas

Tadahiko Mizuno, Tadashi Akimoto, Kazuhisa Azumi, Masatoshi Kitaichi, Kazuya Kurokawa, Michio Enyo

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 385-389

Technical Paper / Electrolytic Devices for Energy Generation

An Interpretation of Some Postelectrolysis Nuclear Effects in Deuterated Titanium

Miguel Algueró, José Francisco Fernández, Fermín Cuevas, Carlos Sánchez

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 390-397

Technical Paper / Nuclear Reactions in Solid

Reproducible D/Pd Ratio >1 and Excess Heat Correlation by 1-µs-Pulse, High-Current Electrolysis

Francesco Celani, Antonio Spallone, Paolo Tripodi, Alessandra Petrocchi, Daniele di Gioacchino, Massimiliano Boutet, Paolo Marini, Vittorio Di Stefano, Marco Diociaiuti, William Collis

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 398-404

Technical Paper / Electrolytic Devices for Energy Generation

Deuteron Screening, Nuclear Reactions in Solids, and Superconductivity

S. N. Vaidya

Fusion Science and Technology / Volume 29 / Number 3 / May 1996 / Pages 405-408

Technical Paper / Nuclear Reactions in Solid

Number 4

Toward Long-Pulse, High-Performance Discharges in Tore Supra: Experimental Knowledge and Technological Developments for Heat Exhaust

Tore Supra Team

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 417-448

Technical Paper / First-Wall Technology

Evaluation of Porous Media Heat Exchangers for Fusion Applications

John H. Rosenfeld, James E. Lindemuth, Mark T. North, Robert D. Watson, Dennis L. Youchison, Richard H. Goulding

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 449-458

Technical Paper / First-Wall Technology

Local Subcooled Flow-Boiling Model Development

Ronald D. Boyd, Xiaowei Meng

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 459-467

Technical Paper / Blanket Engineeringy

Analytical Modeling of Complete Nukiyama Curves Corresponding to Expected Low Void Fraction at High Subcooling and Flow Rate

Diethelm Schroeder-Richter

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 468-486

Technical Paper / Blanket Engineering

Critical Heat Flux of Subcooled Flow Boiling in Swirl Tubes Relevant to High-Heat-Flux Components

Fujio Inasaka, Hideki Nariai

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 487-498

Technical Paper / Blanket Engineering

A Mechanistic Model for the Prediction of Water-Subcooled-Flow-Boiling Critical Heat Flux at High Liquid Velocity and Subcooling

Gian Piero Celata, Maurizio Cumo, Andrea Mariani, Giuseppe Zummo

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 499-511

Technical Paper / Blanket Engineering

Effect of Porous Coating on Critical Heat Flux Removed by Subcooled Water at Low Flow Rates

Diethelm Schroeder-Richter, Sabiha Yildiz

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 512-518

Technical Paper / Blanket Engineering

Critical-Heat-Flux Experiment on the Screw Tube Under One-Sided-Heating Conditions

Masanori Araki, Kazuyoshi Sato, Satoshi Suzuki, Masato Akiba

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 519-528

Technical Paper / Divertor System

Optimal Thermal-Hydraulic Performance for Helium-Cooled Divertors

Michael G. Izenson, Jerry L. Martin

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 545-558

Technical Paper / Divertor System

High-Heat-Flux Testing of Helium-Cooled Heat Exchangers for Fusion Applications

Dennis L. Youchison, Michael G. Izenson, Chandu B. Baxi, John H. Rosenfeld

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 559-570

Technical Paper / Divertor System

Vapotron as Heat Sink for Flat High-Conductivity Unidirectional Carbon-Fiber-Composite Tiles

Hans-Dieter Falter, Dragoslav Ciric, Andrea Celentano, Christopher M. Ibbott, Michael J. Watson, Masanori Araki, Satoshi Suzuki, Kazuyoshi Sato

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 571-583

Technical Paper / Divertor System

Performance of Hypervapotron Beam-Stopping Elements at JET

Hans-Dieter Falter, Ernest Thompson

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 584-595

Technical Paper / Plasma Heating System

Thermal Fatigue Testing of a Diffusion-Bonded Beryllium Divertor Mock-Up Under ITER-Relevant Conditions

Dennis L. Youchison, Radmir N. Guiniatouline, Robert D. Watson, Jimmie M. McDonald, David S. Walsh, V. I. Beloturov, Igor V. Mazul, Andrey P. Zakharov, Bernice E. Mills, Dale R. Boehme, Vladislav Ilich Savenko

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 599-614

Technical Paper / Divertor System

Structural Design Codes: Strain-Life Method and Fatigue Damage Estimation for ITER

Panayiotis J. Karditsas

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 615-626

Technical Paper / Experimental Device

Development of Fusion Safety Standards

G. R. Longhurst, D. A. Petti, G. A. Dinneen, J. S. Herring, J. DeLooper, J. D. Levine, M. J. Gouge

Fusion Science and Technology / Volume 29 / Number 4 / July 1996 / Pages 627-631

Department / Report

 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement