Rockville, Md.–based X-energy announced yesterday that it has selected Zachry Group and a combined team from Burns & McDonnell and Day & Zimmermann to work with the company on the next phases of design and deployment for its Xe-100 small modular reactor fleet.

BWX Technologies, Inc., will deliver the first microreactor in the United States under a contract awarded by the U.S. Department of Defense Strategic Capabilities Office (SCO), the company announced today. BWXT will have two years to build a transportable microreactor prototype to the SCO’s Project Pele specifications and deliver it to Idaho National Laboratory for testing under a cost-type contract valued at about $300 million.

A cross-section view of X-energy’s Xe-100 reactor. (Image: X-energy)

U.K. nuclear services company Cavendish Nuclear has signed a memorandum of understanding with U.S. reactor and fuel-design engineering firm X-energy to act as its deployment partner for high-temperature, gas-cooled reactors (HTGRs) in the United Kingdom.

Headquartered in Rockville, Md., X-energy is the developer of the Xe-100, an 80-MWe reactor with a modular design permitting it to be scaled into a “four-pack” 320-MWe power plant. As a pebble bed HTGR, the Xe-100 would use TRISO particles encased in graphite pebbles as the fuel and helium as the coolant.

According to a May 11 joint statement from the companies, development and deployment of HTGRs in the United Kingdom would support an increase in the nation’s energy security, contribute toward the government’s net-zero-by-2050 commitment, and create considerable opportunities for the U.K. nuclear supply chain.

The Department of Defense’s Strategic Capabilities Office (SCO) on April 13 released a record of decision (ROD) for Project Pele, a program intended to design and build a mobile microreactor at Idaho National Laboratory. The ROD for Project Pele is based on a final environmental impact statement (EIS) published in February. The designs submitted by the two candidate vendors—BWXT Advanced Technologies and X-energy—both fit the parameters analyzed in the final EIS.

TRISO-X submitted a license application for a high-assay low-enriched uranium (HALEU) fuel fabrication facility to the Nuclear Regulatory Commission on April 6, the day after parent company X-energy announced that TRISO-X had secured a 110-acre site in Oak Ridge, Tenn., for the construction of the facility, which it is aiming to have operating in 2025.

The University of Illinois at Urbana-Champaign formed a partnership with Ultra Safe Nuclear Corporation to deploy an advanced research reactor on campus, based on a microreactor design that improves upon well-established high-temperature, gas-cooled reactor (HTGR) technology. Unlike traditional research reactors, our focus at UIUC is not on a laboratory tool to study radiation interactions with matter, or even on the production of radioisotopes. Instead, we will build a research, education, and training facility intended to help advanced reactor technology become a widely deployable, marketable, economic, safe, and reliable option for a clean energy future. If successful, the USNC-designed Micro Modular Reactor (MMR)^a would operate on UIUC’s campus with the capability to advance critical and enabling technologies required for advanced reactors to realize their full potential, while educating and training the workforce as a key step toward delivering on the technology’s promise. Microreactors can become a transformative distributed energy technology and revolutionize energy infrastructure worldwide.

X-energy has announced that its wholly owned subsidiary, TRISO-X, plans to build the TRISO-X Fuel Fabrication Facility, dubbed TF3, at the Horizon Center Industrial Park in Oak Ridge, Tenn. X-energy has produced kilogram quantities of fuel at its pilot plant at Oak Ridge National Laboratory through a public-private partnership.

The commercial plant will use high-assay low-enriched uranium (HALEU) to produce TRISO particles, which are fabricated into fuel forms, including the spherical graphite “pebbles” needed to fuel the company’s Xe-100 high-temperature gas reactor. Site preparation and construction are expected to get underway in 2022, and commissioning and start-up are scheduled for as early as 2025, according to X-energy.

X-energy, developer of the Xe-100 small modular reactor, has delivered the first of four sets of equipment for the Xe-100 reactor protection system (RPS) prototype, marking the latest milestone in the company’s efforts under the Department of Energy’s Advanced Reactor Demonstration Program (ARDP).

The U.S. Department of Defense (DOD) is looking to reduce its reliance on local electric grids and diesel-fueled generators at military installations. Project Pele is designed to demonstrate the technical and safety features of mobile microreactors capable of generating up to 5 MWe.

When I came to work at BWX Technologies immediately after getting my degree in chemical engineering from the University of Virginia, I was amazed to see how nuclear energy could be harnessed to both power and protect our country. Since then, I’ve come to see that nuclear energy can do even more. The nuclear industry’s next tasks are to address climate change, propel us to other bodies in the solar system, and provide power when we arrive. Recently developed coated fuels are an enabling technology for these tasks.

Positioning nuclear power to combat climate change requires the rollout of advanced reactors to replace carbon-­emitting power generation. That necessity, and its urgency, is reflected in recent budget proposals for the Department of Energy’s Office of Nuclear Energy. Part of that proposed funding focuses on deploying new fuel technologies.

Metallic fuels, which are alloys of fissionable material, offer several advantages, including more fuel-­efficient reactors with a double or greater fuel burnup than the oxide fuels found in light water reactors. Fuel fabrication is also more cost-­effective with metallic fuels than with oxide fuels. Furthermore, much of the research and development effort needed to qualify these metallic fuels has been done.

BWX Technologies announced on January 24 that it has been awarded a $4.9 million contract amendment to produce TRISO fuel particles using natural uranium and to demonstrate performance under a defined production schedule. BWXT’s Nuclear Operations Group will perform the work at BWXT’s Lynchburg, Va., facility, where TRISO production was restarted in November 2020. The contract amendment was awarded by Battelle Energy Alliance, which manages Idaho National Laboratory on behalf of the Department of Energy.

X-energy, the Rockville, Md.–based developer of the Xe-100 small modular reactor, announced on December 15 that X-energy Canada has signed a memorandum of understanding with the First Nations Power Authority (FNPA) to look for ways to build “Indigenous capacity” for the future SMR industry in Canada.

Nuclear thermal propulsion (NTP) is one technology that could propel a spacecraft to Mars and back, using thermal energy from a reactor to heat an onboard hydrogen propellant. While NTP is not a new concept, fuels and reactor concepts that can withstand the extremely high temperatures and corrosive conditions experienced in the engine during spaceflight are being designed now.

BWX Technologies announced on December 13 that it has delivered coated reactor fuels to NASA for testing in support of the Space Technology Mission Directorate’s NTP project. BWXT is developing two fuel forms that could support a reactor ground demonstration by the late 2020s, as well as a third, more advanced and energy-dense fuel for potential future evaluation. BWXT has produced a videoof workers processing fuel kernels in a glovebox.

Mignogna

The world faces an urgent need to decarbonize and expand clean energy systems. Earlier this year, the United States announced goals to achieve a 100 percent clean electricity grid by 2035 and net-zero emissions across the entire economy by 2050. Today, nuclear energy plants provide more than 50 percent of the United States’ carbon-free energy. Existing plants, along with the advanced technologies currently being developed and demonstrated, are crucial to the United States’ and the world’s clean energy future.

Technologies such as advanced non-light water reactors, which have higher operating temperatures than today’s light water reactors, will be vital to meeting economy-wide decarbonization goals. For example, process heat applications and chemical and synthetic fuel production require higher temperatures and currently rely on fossil fuels. Advanced reactors are the only carbon-free technologies that can provide the high temperatures these processes need.

X-energy and Centrus Energy announced last week that they have completed the preliminary design of the TRISO-X fuel fabrication facility and have signed a contract for the next phase of work. The planned facility would produce TRISO fuel particles and pack those particles into fuel forms, including the spherical graphite “pebbles” needed to fuel X-energy’s Xe-100 high-temperature gas reactor.

X-energy and Centrus Energy Corporation yesterday announced the completion of the preliminary design for X-energy’s TRISO-X Fuel Fabrication Facility, plus the signing of a contract for Centrus to continue its work as the project enters its next phase.

Canadian Nuclear Laboratories (CNL) last week issued a call for proposals for the third round of its Canadian Nuclear Research Initiative (CNRI) program.

More information about the program, including application details, can be found online.

Global First Power’s (GFP) Micro Modular Reactor (MMR) project has moved to the formal license review phase with the Canadian Nuclear Safety Commission (CNSC), becoming the first small modular reactor to do so.

The Tennessee Valley Authority and nuclear technology and engineering company Kairos Power this morning announced plans to collaborate on the deployment of the latter’s low-power demonstration reactor, dubbed Hermes, at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tenn. TVA will provide engineering, operations, and licensing support to help Kairos with deployment, according to the announcement.