American Nuclear Society
Home

Home / Publications / Journals / Nuclear Science and Engineering / Volume 150 / Number 2

Vapor Explosion of Coolant Jet When Penetrating a Hot Molten Metal

Y. Perets, R. Harari, E. Sher

Nuclear Science and Engineering / Volume 150 / Number 2 / June 2005 / Pages 237-244

Technical Paper

The vapor explosion phenomenon is investigated experimentally for a geometrical arrangement in which a cold liquid (water) jet is injected into a hot liquid surface (tin). Medium-scale experiments using 1 kg of molten tin were performed in an open geometry experiment system. In the first phase of the research, the influence of the injection mass flow rate on the likelihood of vapor explosion was investigated in order to map the various relevant regimes. In the second phase, the influence of some selected parameters on the interaction was studied to characterize the relevant parameters of the vapor explosion phenomenon.

The range of the initial tin and water temperatures that leads to vapor explosion has been determined in order to define the thermal interaction zone. It is noticed that vapor explosion can occur at high water temperatures even near the saturation point. The delay time for the explosion to occur and the degree of the interaction violence were correlated with the initial tin and water temperatures. We also clarified the triggering point and noted a correlation between the quench temperature and the likelihood of the vapor explosion occurrence.

 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement