American Nuclear Society

Home / Publications / Journals / Fusion Science and Technology / Volume 60 / Number 3

Management of Tritium in ITER Waste

S. Rosanvallon, M. Benchikhoune, S. Ciattaglia, J. Elbez Uzan, O. Gastaldi, B. C. Na, N. Taylor

Fusion Science and Technology / Volume 60 / Number 3 / October 2011 / Pages 855-860

ITER / Proceedings of the Ninth International Conference on Tritium Science and Technology /

ITER will use tritium as fuel. Procedures and processes are thus put in place in order to recover the tritium that is not used in the fusion reaction, including from waste and effluents. The tritium thus recovered can be re-injected into the fuel cycle. Moreover, tritium content and thus outgassing may be a safety concern, because of the potential for releases to the environment, both from the facility and from the final disposal (subjected to stringent acceptance criteria in the current waste final disposal). The aim of this paper is to present the measures considered to deal with the specific case of tritium in the liquid and solid waste that will arise from ITER operation and decommissioning. It concerns the processes that are considered from the waste production to its final disposal and in particular: the tritium removal stages (in-situ divertor baking at 350°C and tritium removal from solid waste and liquid and gaseous effluents), the removal of dust contamination (dust containing tritium produced by plasma-wall interaction and by the maintenance/refurbishment processes) and the measures to enable safe processing and storage of the waste (wall-liner in the hot cell facility to limit concrete contamination and interim storage enabling tritium decay for waste that could not be directly accepted in the host-country final disposal facilities).

Questions or comments about the site? Contact the ANS Webmaster.