Features

In March 1949, the Atomic Energy Commission selected a site in Idaho for the National Reactor Testing Station (NRTS), known today as Idaho National Laboratory. Idaho’s Snake River Plain was selected because of the rural nature of southern Idaho. The site would go on to be the most remarkable proving ground for today’s nuclear industry. Experiments at this world-class facility have continually paved the way for nuclear innovation.

In remote southeastern Washington you will find the sprawling Hanford Site, which was constructed to produce plutonium for the Manhattan Project. Within this complex is the first plutonium production reactor, the Hanford B Reactor. The DuPont Corporation was responsible for construction and operation of the B Reactor. Due to the urgency of the Manhattan Project, construction was completed in just over a year, and The B Reactor went critical on September 26, 1944. After the needs of the Manhattan Project were satisfied, the reactor was briefly shut down and then restarted to produce plutonium for roughly another 20 years, supporting Cold War efforts. In addition to plutonium production, the B Reactor also pioneered the process to produce tritium for the first-ever thermonuclear test.

The United Kingdom’s nuclear renaissance

The United Kingdom’s nuclear industry is expanding, with the U.K. government committed to supporting the build of more civil nuclear power plants (deployments up to 24 GW by 2050)¹ while also undertaking large-scale decommissioning work in parallel.² The defense sector is experiencing growth with the decommissioning, operation, and new build of submarines, plus managing the U.K.’s deterrent.³ Although the civil and defense programs are separate, they draw on the same group of skills and people.

In the 1960s, Alvin Weinberg at Oak Ridge National Laboratory initiated a series of studies on nuclear agro-­industrial complexes¹ to address the needs of the world’s growing population. Agriculture was a central component of these studies, as it must be. Much of the emphasis was on desalination of seawater to provide fresh water for irrigation of crops. Remarkable advances have lowered the cost of desalination to make that option viable in countries like Israel. Later studies² asked the question, are there sufficient minerals (potassium, phosphorous, copper, nickel, etc.) to enable a prosperous global society assuming sufficient nuclear energy? The answer was a qualified “yes,” with the caveat that mineral resources will limit some technological options. These studies were defined by the characteristic of looking across agricultural and industrial sectors to address multiple challenges using nuclear energy.

The Department of Energy’s commitment to breaking down market barriers with initiatives, programs, and access to facilities is making it simpler and more efficient than ever for industry to partner with national laboratories. It is especially timely, as the country continues to face evolving security, economic, and clean energy challenges. Partnering opportunities via the DOE’s Cooperative Research and Development Agreements (CRADAs) and Strategic Partnership Projects (SPPs) are particularly prevalent in the commercial nuclear community and have seen a tremendous amount of funding and support dedicated to advancing the development, demonstration, and deployment of new reactor technologies.

Say “decarbonize” and people think about electricity. But the U.S. industrial sector emits nearly as much carbon dioxide and other global warming gases as the electric sector, which rank at 25 and 24 percent of the problem, respectively, according to the U.S. Environmental Protection Agency. The commercial and residential sectors account for another 13 percent, the EPA says, most of it for space heating. How do we decarbonize that? More specifically, how do nuclear reactors decarbonize that?

In a former farm field just outside the historic town of Janesville in south-central Wisconsin, a large concrete-and-steel building is taking shape. Dubbed the Chrysalis, the building will eventually house eight accelerator-based neutron generators, which start-up company SHINE Technologies will use to produce molybdenum-99. As the precursor to the medical radioisotope technetium-99m, Mo-99 is used in tens of millions of diagnostic procedures every year, primarily as a radioactive tracer.

At the heart of the Chrysalis will be the high-flux neutron generators, being supplied by SHINE’s sister company, Phoenix. The compact accelerators use a deuterium-tritium fusion process to produce neutrons, which in turn induce a subcritical fission reaction in an aqueous low-enriched uranium target (19.75 percent uranium-235) to produce Mo-99.

Are you an energy genius? It’s hard to tell whether or not Americans are really aware of the energy that controls our lives, so the following quiz should be revealing. Click through the multiple-choice options below to reveal the answers.

Scoring: Zero to five correct answers out of the 23 questions means you may need to read up on energy so you’re not at the mercy of others. A score of 6 to 10 correct answers is a good passing grade. Answer 11 to 15 correctly, and you’re really energy literate. Getting 16 to 19 correct means you should be advising Congress. Twenty or more right answers suggests you’re Spock reincarnated.

Another calendar year has passed. Before heading too far into 2023, let’s look back at what happened in 2022 for the American Nuclear Society and the nuclear community. In today's post that follows, we have compiled from Nuclear News and Nuclear Newswire what we feel are the top nuclear news stories from September through December 2022.

But first:

• Click here for some of ANS’s activities for 2022
• Click here for the top nuclear news stories from January through March 2022
• Click here for the top nuclear news stories from April through June 2022
• Click here for the top nuclear news stories from July through September 2022

Another calendar year has passed. Before heading too far into 2023, let’s look back at what happened in 2022 for the American Nuclear Society and the nuclear community. In today's post that follows, we have compiled from Nuclear News and Nuclear Newswire what we feel are the top nuclear news stories from July through September 2022.

Stay tuned this week for the top stories from the rest of the past year.

But first:

• Click here for some of ANS’s activities for 2022
• Click here for the top nuclear news stories from January through March 2022
• Click here for the top nuclear news stories from April through June 2022

Another calendar year has passed. Before heading too far into 2023, let’s look back at what happened in 2022 for the American Nuclear Society and the nuclear community. In today's post that follows, we have compiled from Nuclear News and Nuclear Newswire what we feel are the top nuclear news stories from April through June 2022.

Stay tuned this week for the top stories from the rest of the past year.

But first:

• Click here for some of ANS’s activities for 2022
• Click here for the top nuclear news stories from January through March 2022

Another calendar year has passed. Before heading too far into 2023, let’s look back at what happened in 2022 for the American Nuclear Society and the nuclear community. In today's post that follows, we have compiled from Nuclear News and Nuclear Newswire what we feel are the top nuclear news stories from January through March 2022.

Stay tuned this week for the top stories from the rest of the past year.

But first, click here for some of ANS’s activities for 2022.

Another calendar year has passed. Before heading too far into 2023, let’s look back at what happened in 2022 for the American Nuclear Society and the nuclear community. In posts that will follow here this week, we have compiled from Nuclear News and Nuclear Newswire what we feel are the top nuclear news stories of the year past.

But first, here are some of ANS’s activities for 2022.

Since the inception of commercial nuclear power in the United States, every control room in every nuclear plant has looked essentially the same. You will see fixed alarm tiles, red and green lights, rows of switches, and analog meters. Until about a decade ago, you would even have seen paper charts (now replaced by digital versions of those same charts). Licensed operators have shown through a proven operating history that this control room design is safe and effective. Genius definitely went into the complexity of circuits and placement of switches and indications in the design, but things have come a long way over the years, and new technology, updated plant designs, and the need to improve efficiency and maintain reliability have impacted staffing and the role of operators. A control room update is long overdue. So, what lies ahead for the future of nuclear control room design? What possibilities exist for the next generation of plants?

Zaitz

Hoff

In late 2015, we heard rumors that Diablo Canyon was under threat of premature closure. As details emerged, we realized the situation was dire—similar stories were emerging around the country and the world. Nuclear plants were shutting down early for reasons that had nothing to do with plant conditions or operations, but because of politics and poor public perception.

We started brainstorming possible ways we could help, then realized our efforts had to be about more than just one plant. We knew we were in a bit of a unique position. There aren’t a whole lot of women in our industry—­especially not hippie environmentalist moms. Our story is interesting in that we were initially skeptical about nuclear power, asked questions over many years, and eventually changed our minds to support it.

Nuclear Newswire is back with the final #ThrowbackThursday post honoring the 80th anniversary of Chicago Pile-1 with offerings from past issues of Nuclear News. On November 17, we took a look at the lead-up to the first controlled nuclear chain reaction and on December 1, the events of December 2, 1942, the day a self-sustaining nuclear fission reaction was created and controlled inside a pile of graphite and uranium assembled on a squash court at the University of Chicago’s Stagg Field.

Mobile unmanned systems, also known as MUS, encompass a range of robotic devices, including drones, ground vehicles, crawlers, and submersibles. They are used for a wide range of industrial and defense applications to automate operations and assist humans or completely remove human workers from hazardous conditions. Robotics are ubiquitous in industrial manufacturing. Military robots are routinely employed in combat support applications, such as reconnaissance, inspection, explosive ordnance disposal, and transportation. Drones are used in many industries for security and monitoring, to conduct aerial inspections or surveys, and to capture digital twins. Wind and solar farms use MUS technologies for day-to-day operations and maintenance.

The question of what to do with the radioactive waste has been raised frequently for both fission and fusion. In the 1970s, fusion adopted the land-based disposal option, primarily based on the Nuclear Regulatory Commission’s decision to regulate all radioactive wastes as only a disposal issue, following the fission guidelines. In the early 2000s, members of the Advanced Research Innovation and Evaluation Study (ARIES) national team became increasingly aware of the high amount of mildly radioactive materials that 1-GWe fusion power plants will generate, compared with the current line of fission reactors. The main concern is that such a sizable inventory of mostly tritiated radioactive materials would tend to rapidly fill U.S. repositories—a serious issue that was overlooked in early fusion studies¹ that could influence the public acceptability of fusion energy and will certainly become more significant in the immediate future if left unaddressed, as fusion moves toward commercialization.

The scale and duration of a national campaign to transport spent nuclear fuel (SNF) from commercial nuclear power plants around the United States would be unprecedented. A meticulous level of planning that considers many elements is needed to inspire public confidence and support.

Consent-based siting has become one of the emergent priorities in nuclear energy, particularly for spent fuel storage and high-level waste (HLW) disposal.¹ Consent-based siting is based on broad public participation to address the needs and concerns of communities, aiming for equity and environmental justice. While there are some successful examples (Finland and Sweden above all), consent-based siting is not a straightforward process. Although Japan, for example, adopted consent-based siting for their HLW disposal over 20 years ago, it has not yet identified a community to host a repository. Environmental and safety concerns have been the biggest bottleneck for siting nuclear facilities. A recent proposal for the interim storage in Andrews, Texas, for instance, has been opposed by Gov. Greg Abbott and others.