ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Explore membership for yourself or for your organization.
Conference Spotlight
2026 ANS Annual Conference
May 31–June 3, 2026
Denver, CO|Sheraton Denver
Latest Magazine Issues
Mar 2026
Jan 2026
Latest Journal Issues
Nuclear Science and Engineering
April 2026
Nuclear Technology
February 2026
Fusion Science and Technology
Latest News
Swiss nuclear power and the case for long-term operation
Designed for 40 years but built to last far longer, Switzerland’s nuclear power plants have all entered long-term operation. Yet age alone says little about safety or performance. Through continuous upgrades, strict regulatory oversight, and extensive aging management, the country’s reactors are being prepared for decades of continued operation, in line with international practice.
William Primak, A. P. Gavin, T. T. Anderson, Emmet Monahan
Nuclear Technology | Volume 36 | Number 1 | November 1977 | Pages 79-84
Radiation Environments in Nuclear Reactor Power Plant | Reactor | doi.org/10.13182/NT77-A31961
Articles are hosted by Taylor and Francis Online.
In contrast to results obtained for neutron irradiation in a thermal reactor near room temperature, lithium niobate plates irradiated in the Experimental Breeder Reactor II (EBR-II) did not become metamict. This is attributed to the elevated temperature of the EBR-II. Ion bombardment experiments indicate that to avoid disordering of lithium niobate on irradiation, its temperature should be maintained above 673 K. Evidence for ionic conductivity was found at 873 K, indicating that it would be inadvisable to permit the temperature to rise that high, particularly with voltage across the plate. In reactor application as a microphone transducer, it is tentatively recommended that the lithium niobate be maintained in the middle of this temperature range for a major portion of reactor operating time.