Looking back at 2021—ANS

January 7, 2022, 7:35AMNuclear News

This is the first of five articles to be posted today to look back at the top news stories of 2021 for the nuclear community. The full article, "Looking back at 2021,"was published in the January 2022 issue of Nuclear News.

Quite a year was 2021. In the following stories, we have compiled what we feel are the past year’s top news stories—please enjoy this recap from a busy year in the nuclear community. But first, what about ANS itself? Let’s look at some of ANS’s activities in 2021.

The PRA standard for advanced non-LWRs

April 23, 2021, 2:55PMNuclear NewsKarl Fleming

The ASME/ANS Joint Committee on Nuclear Risk Management (JCNRM) has achieved a significant milestone in the advancement of probabilistic risk assessment (PRA) technology. ANSI/ASME/ANS RA-­S-­1.4–2021 [1], Probabilistic Risk Assessment Standard for Advanced Non-­Light Water Reactor Nuclear Power Plants, has been approved by the JCNRM, the ANS Standards Board, the ASME Board of Nuclear Codes and Standards, and the American Nuclear Standards Institute.

Risk-informed, performance-based safety: Past, present, and future

June 26, 2020, 3:05PMNuclear NewsN. Prasad Kadambi, Edward Wallace, James O’Brien, and Robert Youngblood

Since the 1980s, the nuclear power industry in the United States has worked to enhance the regulatory framework for nuclear facilities by making it more risk-informed and performance-based (RIPB). This has had some success in improving safety and reducing regulatory burden by focusing resources on the most risk--significant areas and allowing greater flexibility in choosing ways to achieve desired safety outcomes. However, there are further opportunities for the use of RIPB approaches in addressing current regulations and applying implementation tools, and in developing new RIPB regulations and advanced tools to further sharpen the focus on risk and performance outcomes.

ANS standards updates

May 12, 2020, 1:29PMNuclear News

ANS publishes standards that set forth requirements for the design, manufacture, or operation of a piece of equipment. These standards can address computer firmware and software, and can address the necessary physical and functional features of equipment, its safe application, or some combination of these. These standards are applied on a voluntary basis, and when adopted by a state or federal agency, they becomes part of their mandatory codes.

ANS standards are available at the ANS Standards store.

The following standards have been approved, published, or are open for comment.