Poster Session

Sensitivity of Shutdown Dose-Rates to Irradiation History Assumptions

3:15–3:16PM MDT

Nikolas Nelson (University of Tennessee, Knoxville), Son N. Quang (University of Tennessee Knoxville), G. Ivan Maldonado (University of Tennessee Knoxville)

Impact of photoneutron activation on the primary cooling circuit of Xcimer’s Athena fusion power plant

3:16–3:17PM MDT

Francisco Ogando (Universidad Nacional de Educación a Distancia), Patrick Sauvan (Universidad Nacional de Educación a Distancia), Rene R. Raffray (Xcimer Consultant), Rafael Juarez (Universidad Nacional de Educación a Distancia), Susana Reyes (Xcimer Energy Corporation), Samuel Walker (Xcimer Energy Corporation), Nikolas Davis (Xcimer Energy Corporation), Wayne R. Meier (Xcimer Consultant), Conner Galloway (Xcimer Energy Corporation)

Feasibility Study of D-T Fusion for Medical-Isotope Production

3:17–3:18PM MDT

Ana Jambrina (VTT Technical Research Centre of Finland)

Predicting Plasma Shape in MAST Reactor Data using Machine Learning

3:18–3:19PM MDT

Lucas A. Hammermeister (University of Michigan - Dearborn), Zachary A. Fusinski (Oak Ridge National Laboratory)

Design Modification Techniques for Torque Mitigation of Electromagnetically Actuated Valves for the ITER Disruption Mitigation System

3:19–3:20PM MDT

Zachary A. Fusinski (Oak Ridge National Laboratory), Trey E. Gebhart (Oak Ridge National Laboratory)

Open-Source Pulse Design Capabilities, Model Validation and Uncertainty Quantification for Fusion Pilot Plants

3:20–3:21PM MDT

Andrew Nelson (Columbia University), John Lhota (Johns Hopkins University), Christopher J. Hansen (Columbia University), Freddie Sheehan (Columbia University), Carlos A. Paz-Soldan (Columbia University)

From Data to Design: Experimental Baselines for Metal Hydride Storage Beds Under Fusion-Relevant Cycling

3:21–3:22PM MDT

Vicky Lizardi-Lobb (Los Alamos National Laboratory), Victoria Hypes-Mayfield (Los Alamos National Laboratory), Joseph H. Dumont (Los Alamos National Laboratory)

Operational Experience with a Deuterium–Tritium Gas Handling System for Beamline Experiments

3:22–3:23PM MDT

Elena Koukina (Acceleron), Ara Knaian, Robert Shmayda (NSSI Recovery Services, Inc.), Kaylee McCormack (Acceleron Fusion), Cody Fagan (Torion USA), Michael W. Koch (Torion USA), Walter Shmayda (Tritium Solutions)

A Scale-Down Study of the Snail Pump using Direct Simulation Monte Carlo Modeling

3:23–3:24PM MDT

Nirajan Adhikari (Oak National National Laboratory), Trey E. Gebhart (Oak Ridge National Laboratory), L.R. Baylor (Oak Ridge National Laboratory)

Effect of Terminal Straight Sections on Cryogenic Pellet Dispersion in Curved Guidetubes

3:24–3:25PM MDT

Celeste Lamadrid (Columbia University), Steven Meitner (Oak Ridge National Laboratory)

CFD Conjugate Heat Transfer Simulations of Supercritical Helium Cooling of the ITER Single-Screw Pellet Extruder

3:25–3:26PM MDT

Ying Xu (Oak Ridge National Laboratory), Steven Meitner (Oak Ridge National Laboratory), Dean McGinnis (Oak Ridge National Laboratory), Sarah E. Smith

An Open-Source Computational Framework for Coupled Thermal-Hydraulic and Tritium Transport Analysis in Fusion Heat Exchangers

3:26–3:27PM MDT

Chirag Khurana (MIT Plasma Science and Fusion Center), Kaelyn Dunnell (MIT), Jarred Jordan (Georgia Tech), James Dark (MIT), Huihua Yang (MIT), Remi Delaporte-Mathurin (MIT), Shaheen Dewji (Georgia Tech)

History of High-Speed Pellet Injector Development

3:27–3:28PM MDT

L.R. Baylor (Oak Ridge National Laboratory)

Impurity Processing for Cryogenic Material Injection Systems

3:28–3:29PM MDT

Paulina M. Texier (Columbia University), Eliot Felske (Columbia University), Celeste Lamadrid, Trey E. Gebhart (Oak Ridge National Laboratory), Sophia Jakel (Columbia University), Julia Kirby (Columbia University), Cassandra McGinley (Columbia University), Sara John (Columbia University), L.R. Baylor (Oak Ridge National Laboratory), Carlos A. Paz-Soldan (Columbia University), Brenda Garcia-Diaz (Savannah River National Laboratory), Pricilla Dua, Hope Hersom (Columbia University)

The development of a CAPE-OPEN compatible vacuum pump model for the hydrogen fuel cycle

3:29–3:30PM MDT

Richard-Joseph L. Peterson (Los Alamos National Laboratory), William L. Kubic, Joseph H. Dumont (Los Alamos National Laboratory)

Measurement of Cryogenic Pellet Ablation Rate and Multi-Species Density

3:30–3:31PM MDT

Eliot Felske (Columbia University), Celeste Lamadrid, John Caughman, Carlos A. Paz-Soldan (Columbia University), Trey E. Gebhart (Oak Ridge National Laboratory), L.R. Baylor (Oak Ridge National Laboratory), Pricilla Dua, Jeffrey Herfindal (Oak Ridge National Laboratory), Julia Kirby (Columbia University), Paulina Texier (Columbia University), Cassandra McGinley (Columbia University), Sara John (Columbia University), Sophia Jakel (Columbia University), Hope Hersom (Columbia University)

Novel Eutectic Metal Method for Remote Joining of Utilities in a Fusion Power Plant

3:31–3:32PM MDT

Sebastian Matiauda (Oak Ridge National Laboratory), Ted Boyd (Oak Ridge National Laboratory), Venugopal K. Varma (Oak Ridge National Laboratory), Adam M. Aaron (Oak Ridge National Laboratory)

Engineering Workflow for Rapid Iteration of Sheared-Flow-Stabilized Z-Pinch Devices

3:32–3:33PM MDT

Seiji U. Thielk (Zap Energy), Frederic Gicquel (Zap Energy)

Surrogate Model Acceleration for Monte Carlo Analysis of Fusion Components

3:33–3:34PM MDT

Jonathan Trieloff (Massachusetts Institute of Technology), Ethan E. Peterson (Massachusetts Institute of Technology)

Development of a Coupled Neutronics and Thermal-Hydraulics Model for Sensor-Driven Tritium Tracking in Fusion Breeding Blankets

3:34–3:35PM MDT

Jessica Wysocki (University of Wisconsin - Madison), Juan M. Valderrama (University of Wisconsin - Madison), Paul P. Wilson (University of Wisconsin Madison), Juliana Pacheco Duarte (University of Wisconsin - Madison), Monica Gehrig (Oak Ridge National Laboratory), Paul W. Humrickhouse (Type One Energy), Ben Lindley (University of Wisconsin Madison)

Isothermal Flow-Assisted Corrosion of Molten Chloride Salts for Fusion Blanket Applications

3:35–3:36PM MDT

Alina Jugan (Massachusetts Institute of Technology), Michael P. Short (Massachusetts Institute of Technology)

Study of a VNS ECRH launcher: Structural system and integration concept

3:36–3:37PM MDT

Peter Spaeh (Karlsruhe Institute of Technology), Christian Bachmann (EURO-Fusion), Alessandro Bruschi (ISTP), Aljaž Čufar (Jožef Stefan Institute), Francesco Fanale (ISTP), Thomas Franke (Eurofusion), Dirk Strauss (Karlsruhe Institute of Technology), Chuanren Wu (Karlsruhe Institute of Technology)

Developing positron emission particle tracking (PEPT) for liquid metal flow imaging

3:37–3:38PM MDT

Cody S. Wiggins (Oak Ridge National Laboratory)

Modeling Tungsten Divertor Response to ELM-like Transients

3:38–3:39PM MDT

Kathryn L. Lygre (University of Wisconsin Madison), Pierre-Clement A. Simon (Idaho National Laboratory), Adriaan A. Riet (Idaho National Laboratory), Paul P. Wilson (University of Wisconsin Madison)

Fabrication Control of Radial Contact Resistivity in HTS Coils

3:39–3:40PM MDT

Melanie Russo (Columbia University), Dylan Schmeling, Carlos A. Paz-Soldan (Columbia University), Thaddeus Kiker

Desktop Additive Manufacture of an RF Metamaterial with Fused Deposition Modeling to Simulate the Cold Plasma Dielectric Tensor for Lower Hybrid Wave Propagation

3:40–3:41PM MDT

Andrew Seltzman (Massachusetts Institute of Technology), Jordan Bergmann (Massachusetts Institute of Technology), Stephen J. Wukitch (Massachusetts Institute of Technology)

Structural Analysis of the Planned Upgrade to the ITER ECH Transmission Line System

3:41–3:42PM MDT

Aravind Shanmugasundaram (US ITER), Greg Hanson (Oak Ridge National Laboratory), Chad Madaychik (US ITER, Oak Ridge National Laboratory), Ben Hardy (Oak Ridge National Laboratory), Michael Kaufman (Fusion Energy Division, Oak Ridge National Laboratory), Robert L. Myatt (Myatt Consulting Inc), Kristine Cochran (Myatt Consulting Inc)

Conceptual Design of the ECH system for Infinity One

3:42–3:43PM MDT

Humberto Torreblanca (Type One Energy Group, Inc), Tim Bigelow (Type One Energy Group, Inc), Luquant Singh (Type One Energy Group, Inc), Walter Guttenfelder (Type One Energy Group, Inc), Kevin Rogers (Type One Energy Group, Inc), Ian Harnett (Type One Energy Group, Inc), Antoine Cerfon (Type One Energy Group, Inc), Alex Baranovsky (Type One Energy Group, Inc)

SHIELD: A Gas Driven Permeation rig for Hydrogen Permeation Barrier testing

3:43–3:44PM MDT

James Dark (MIT), Colin Weaver (MIT), Rémi Delaporte-Mathurin, Sara E. Ferry (MIT PSFC), Kevin B. Woller (Massachusetts Institute of Technology)

Measurement and analysis of fast neutron and gamma ray spectra in a concrete shielding assembly irradiated with 14 MeV neutrons

3:44–3:45PM MDT

Axel Klix (Karlsruhe Institute of Technology), Davide Flammini, Daniil Koliadko (Karlsruhe Institute of Technology), Dieter Leichtle (Karlsruhe Institute of Technology)

Machine Learning-Informed Prediction of Single-Nuclide Activation Responses

3:45–3:46PM MDT

Anupama S. Rajendra (University of Wisconsin Madison), Tim D. Bohm (University of Wisconsin Madison), Paul P. Wilson (University of Wisconsin Madison)

New developments in transport and activation computational simulations in accelerator-based facilities

3:46–3:47PM MDT

Victor Lopez (National University of Distance Education (UNED), Spain), Patrick Sauvan, Francisco Ogando (ETSI Industriales UNED), Javier Sanz (ETS Ingenieros Industriales, UNED)

In situ radiation induced electrical degradation and thermal conductivity measurements for ceramics

3:47–3:48PM MDT

Zoe L. Fisher (Massachusetts Institute of Technology), Angus Wylie (Massachusetts Institute of Technology), Michael P. Short (Massachusetts Institute of Technology)

Assessing Viability of Carbide Dispersion Strengthened W Composites as Plasma Facing Materials for RF Antenna Applications

3:48–3:49PM MDT

Kaitlyn Butler (University of Tennessee Knoxville), John Caughman, Mason D. Phillips (University of Tennessee), Emily H. Mang (Oak Ridge National Laboratory), Weicheng Zhong (Oak Ridge National Laboratory), Caen K. Ang (University of Tennessee Knoxville), Xing Wang (Pennsylvania State University), David C. Donovan (University of Tennessee Knoxville)

Design, Synthesis, Characterization and Testing of Low Activation Alloys for Fusion Energy

3:49–3:50PM MDT

Osman El Atwani (Pacific Northwest National Laboratory), Skye Supakul (Pacific Northwest National Laboratory), Robin Ishtiaque (Pacific Northwest National Laboratory), Enrique Martinez Saez (Clemson University), Wahyu Setyawan (Pacific Northwest National Laboratory), Dan Thoma (Universiry of Wisconsin Madison)

Overview of the Upcoming Tungsten Tile Testing Campaign at DIII-D

3:50–3:51PM MDT

Jonathan D. Coburn (Sandia National Laboratories), Chris Murphy (General Atomics), Tom Wauters (ITER Organization), Karl Schultz (General Atomics), Kyle Teixeira (General Atomics), Suk-Ho Hong (DIII-D National Fusion Facility at GA), Igor Bykov (General Atomics), Tyler Abrams (General Atomics), Florian Effenberg (Princeton University, PPPL), Adrianus Sips (General Atomics), Lei Chen (ITER Organization), Franck Dechelette (ITER Organization), Quentin Deliege (ITER Organization), Takeshi Hirai (ITER Organization), Ryan Hunt (ITER Organization)

The LMNT facility: high throughput, near prototypic irradiation of bulk fusion materials with 10-30 MeV protons

3:51–3:52PM MDT

Sara E. Ferry (MIT PSFC), Zach Hartwig (Massachusetts Institute of Technology), Lou Wainwright (MIT PSFC)

A Prototype Vacuum-Sieve-Tray for Fusion Fuel Extraction from Molten Salt Blankets

3:52–3:53PM MDT

Eleanor A. Winkler (Columbia University), Eliot Felske (Columbia University), Zohar Ford (Columbia University), Chirag Khurana (Columbia University), Damien Kilduff (Columbia University), Elissa Kim (Columbia University), Rohan Lopez (Columbia University), Maryam Naser (Columbia University), Carlos A. Paz-Soldan (Columbia University)

Characterization of Lead-Lithium and Lessons Learned with Tritium Extraction eXperiment

3:53–3:54PM MDT

Thomas Fuerst (Idaho National Laboratory), Wei Tang (Idaho National Laboratory), Anthony Bowers (Idaho National Laboratory), Chase N. Taylor (Idaho National Laboratory), Pattrick Calderoni (Idaho National Laboratory)

Improving Permeator Modelling in the Low-Flux Regime

3:54–3:55PM MDT

Sleight Halley (LANL), Victoria Hypes-Mayfield (LANL), William L. Kubic, Richard-Joseph Peterson, Joseph H. Dumont (Los Alamos National Laboratory), David Dogruel (Los Alamos National Laboratory)

Pulsed Liner Fusion: Advantages and Challenges for the High Current Pulsed Power Approach to IFE

3:55–3:56PM MDT

Simon Bott-Suzuki (UC San Diego / CER), Noah Dilworth (University of California San Diego), Sergio Veliz (University of California San Diego), Matt Gomez (Sandia National Laboratories), Chris Jennings (Sandia National Laboratories), Kyle Peterson (Sandia National LaboratoriesTom), Paul Holligan (First Light Fusion), Johnathan Skidmore (First Light Fusion), Ryan D. McBride (University of Michigan Ann Arbor), Simon Bland (Imperial College London), Jack Hare (Cornell University)

Neutron-tolerant diagnostics for wall temperature in a fusion reactor

3:56–3:57PM MDT

Maxim Umansky (Lawrence Livermore National Laboratory), Alessandro Marinoni, David Aldana (Univ. California, San Diego)

Preliminary Mechanical Design and Analysis for In-vessel components of the ITER Electron Cyclotron Emission

3:57–3:58PM MDT

Jagrut Bhavsar (Princeton Plasma Physics Laboratory), Orlando Pastor (Princeton Plasma Physics Laboratory), Jiarong Fang (PPPL), A. Ouroua (University of Texas-Austin), Nathan Arnwine (Oak ridge national laboratory)

Monolithic Spatial Heterodyne Spectroscopy as a Robust Tool for Tritium Accountancy

3:58–3:59PM MDT

Abigail Waldron (Savannah River National Laboratory), Louis Mcnamara (SRNL)

Shape Memory Alloy Connector Applications in Fusion Reactors

3:59–4:00PM MDT

Gordon T. Boyd (Oak Ridge National Laboratory)

Extended Performance Assessment of the ITER Silicon Carbide Pyramidal Emitter Prototype for In-Situ ECE Diagnostic Calibration

4:00–4:01PM MDT

Joseph Ziegel (Institute for Fusion Studies, The University of Texas at Austin), Max E. Austin (Institute for Fusion Studies, The University of Texas at Austin), A. Ouroua (Center for Electromechanics, The University of Texas at Austin), William L. Rowan (Institute for Fusion Studies, The University of Texas at Austin)

Design and Engineering of FURRY: A Plasma-Facing Materials Testing Platform

4:01–4:02PM MDT

Liam K. King (North Carolina State University, Department of Nuclear Engineering)

W-based Nanostructures to Suppress Fuzz Formation and Growth

4:02–4:03PM MDT

Yongqiang Wang (Los Alamos National Lab), Feng Ren (Wuhan University)

Nuclear Data Uncertainty Propagation in a 1-D Cylindrical Model of the Fusion Nuclear Science Facility (FNSF)

4:03–4:04PM MDT

Enrique Miralles-Dolz (Princeton Plasma Physics Laboratory), Michael Churchill (Princeton Plasma Physics Laboratory), Tim D. Bohm (University of Wisconsin Madison)

Tungsten-Based Refractory High-Entropy Alloys for Plasma-Facing Materials

4:04–4:05PM MDT

Bai Cui (University of Nebraska Lincoln)

Joining Dissimilar Metals with Functionally Graded Materials Prepared by Spark Plasma Sintering

4:05–4:06PM MDT

Bronson Lynn (Savannah River National Laboratory), Dale Hitchcock (Savannah River National Laboratory), Sawyer Hart (Savannah River National Laboratory)

Scalable Severe Plastic Deformation (SPD) and Dynamic Recrystallization (DRX) with Friction-Based Methods for Oxide Dispersion Strengthened (ODS) Alloys

4:06–4:07PM MDT

Dalong Zhang (Baylor University), Brian Jordon (Baylor University), Paul Allison (Baylor University)

Exploration studies on open-surface fast lithium flow divertor concept using tungsten substrate and helium cooling

4:07–4:08PM MDT

Yuchen Jiang (Oak Ridge National Laboratory), Sergey Smolentsev (Oak Ridge National Laboratory (ORNL)), Sunday C. Aduloju (Oak Ridge National Laboratory), Rajesh Maingi (Princeton Plasma Physics Laboratory)

MHD Behavior of Weakly Electrical Conducting Fluids Subject to Conducting Walls

4:08–4:09PM MDT

Justin Weinmeister (Oak Ridge National Laboratory), Hao Wu

Comparison of Flowing and Static Liquid Metal Divertor Concepts for Fusion Power Exhaust

4:09–4:10PM MDT

Sergey Smolentsev (Oak Ridge National Laboratory (ORNL))

Catalyzed Deuterium Fusion Neutron Source for the Transmutation and Recycling of Actinides

4:10–4:11PM MDT

JOHN SLOUGH (MSNW LLC)

Development of current driven cryogenic fibers for preheat in MagLIF

4:11–4:12PM MDT

Simon C. Bott Suzuki (University of California San Diego), Noah Dilworth (University of California San Diego), Sergio Veliz (University of California San Diego), Matt Gomez (Sandia National Laboratories), Chris Jennings (Sandia National Laboratories), Kyle Peterson (Sandia National Laboratories), Tom Awe (Sandia National Laboratories)

Conceptual layout of a non-nuclear BCTF in San Diego to accelerate Fusion Blanket Technology Development

4:12–4:13PM MDT

Giacomo Dose (General Atomics), Brian Grierson (General Atomics), Paul Beharrell (General Atomics), Ken Khumthong, Bruce Lombardo (General Atomics), Panto Mijatovic (General Atomics), Nikolai Norausky (General Atomics), Mark S. Tillack (US San Diego), David Weisberg (General Atomics)

STELLARATOR DESIGN OPTIMIZATION VIA AUTOMATED SIMULATION WORKFLOWS AND AI A COST-ACCOUNT-FIRST FORMULATION IN THE NUPLANT FRAMEWORK

4:13–4:14PM MDT

Omer Mohammed (nTtau Digital), Simon Woodruff (nTtau Digital Ltd), Abinash Manikandan (nTtau Digital), Dominic Longhorn (nTtau Digital), Jamie Edwards (nTtau Digital), Luis Garcia-Alen Garcia (nTtau Digital), Max Moreland (nTtau Digital), Megan Crocker (nTtau Digital), Sophie Sharpe (nTtau Digital), Thomas Wynne (nTtau Digital), Tushaar Davies (nTtau Digital)

Hot Isostatic Pressing Technology for V-4Cr-4Ti alloys to tungsten joining for Fusion Reactor Applications

4:14–4:15PM MDT

Adam Jackson (University of Birmingham), Moataz Attallah (Loughborough University), Sam Cruchley (University of Birmingham), Michael Parsons (Manufacturing Technology Centre), Arunodaya Bhattacharya (University of Birmingham)

Coupled neutronics-CFD modeling of activated corrosion product transport

4:15–4:16PM MDT

Arpan Sircar (Oak Ridge National Laboratory), Jin Whan Bae (Oak Ridge National Laboratory), Katarzyna Borowiec (Oak Ridge National Laboratory (ORNL)), Vittorio Badalassi (Oak Ridge National Laboratory), Cami Collins (Oak Ridge National Laboratory)

Early performance assessment of high-Z oxide coated silicon nitride helicon windows for MPEX

4:16–4:17PM MDT

Gayatri D. Dhamale (Oak Ridge National Laboratory), John Caughman, Marlene Patino (University of California, San Diego), Matthew Baldwin (US San Diego), Theodore M. Biewer (Oak Ridge National Laboratory), Tim Bigelow (Oak Ridge National Laboratory), Keisuke Fujii (Oak Ridge National Laboratory), Richard Goulding, Michael Kaufman (Oak Ridge National Laboratory), Joshua Larson, Cornwall Lau, Harry Meyer III (Oak Ridge National Laboratory), Simon Moor (University of California, San Diego), George Tynan (University of California, San Diego), Ezekial Unterberg (Oak Ridge National Laboratory)

Updates on the Neutron Irradiation Campaign of Solid Breeder Materials for the Fusion Blanket Development through Nuclear Testing FIRE Collaborative

4:17–4:18PM MDT

Xiao-Ying Yu (Oak Ridge National Laboratory), Richard H. Howard (Oak Ridge National Laboratory), Josina W. Geringer (Oak Ridge National Laboratory), Gabriel Parker, Adrian Schrell (Oak Ridge National Laboratory), Jose L. Salcedo-Perez, Tobias Misicko (Oak Ridge National Laboratory), Jacob Mohar (Oak Ridge National Laboratory), Beth Armstrong (Oak Ridge National Laboratory)

The Current MPEX Research Plan and Preparation for Transition to Operations

4:18–4:19PM MDT

Joshua J. Larson (Oak Ridge National Laboratory), John Caughman (Oak Ridge National Laboratory), Theodore M. Biewer (Oak Ridge National Laboratory), Gayatri Dhamale (Oak Ridge National Laboratory), Michael Kaufman (Oak Ridge National Laboratory), Lauren Nuckols (Oak Ridge National Laboratory), Jake Nichols (Oak Ridge National Laboratory), Muhammad Hussain (Oak Ridge National Laboratory), John Sanseverino (Oak Ridge National Laboratory), Ezekial Unterberg (Oak Ridge National Laboratory)

Lead-Lithium Blanket Activities at Idaho National Laboratory

4:19–4:20PM MDT

Thomas Fuerst (Idaho National Laboratory), Wei Tang (Idaho National Laboratory), Anthony Bowers (Idaho National Laboratory), Chase N. Taylor (Idaho National Laboratory), Matthew Arrowood (Idaho National Laboratory), Matthew Vaughan (Idaho National Laboratory), Pattrick Calderoni (Idaho National Laboratory)

Experimental Investigation of Flow Boiling in a Divertor Cooling Channel Mock-up Using Visual and Thermal Imaging

4:20–4:21PM MDT

Gregor Kozmus (Jozef Stefan Institute), Aljosa Gajsek, Bostjan Koncar (Jozef Stefan Institute)

Conceptual Design of a Megawatt-Scale Muon-Catalyzed Fusion Machine

4:21–4:22PM MDT

Ara N. Knaian (Acceleron Fusion, Inc.)

Used Nuclear Fuel for On-Ramping the Fusion Economy with Kilogram Quantities of Commercial Tritium

4:22–4:23PM MDT

Terence Tarnowsky (Los Alamos National Laboratory), Paul Lisowski (Los Alamos National Laboratory), Richard L. Sheffield (Los Alamos National Laboratory)

Unlocking the Potential of Vanadium Metal Membranes for Tritium Recovery

4:23–4:24PM MDT

Cameron Burst (Colorado School of Mines), Thomas Fuerst (Idaho National Laboratory), Wei Tang (Idaho National Lab), J. Douglas Way (Colorado School of Mines), Colin A. Wolden (Colorado School of Mines)

Water Detritiation: From ML-Guided Selection to Catalyst Synthesis

4:24–4:25PM MDT

Rashad Ahmadov (Laboratory for Laser Energetics), Mark Wittman (University of Rochester), Zachary Robinson (Laboratory for Laser Energetics), Matthew Sharpe (University of Rochester)

Tracking In-flight Spherical Inertial Fusion Energy Surrogate Targets

4:25–4:26PM MDT

Chris McGuffey (General Atomics)