American Nuclear Society
Home

Home / Publications / Journals / Fusion Science and Technology / Volume 72 / Number 4

Volume 72

Number 4

Design Strategy and Recent Design Activity on Japan’s DEMO

Kenji Tobita, Nobuyuki Asakura, Ryoji Hiwatari, Youji Someya, Hiroyasu Utoh, Kazunari Katayama, Arata Nishimura, Yoshiteru Sakamoto, Yuki Homma, Hironobu Kudo, Yuya Miyoshi, Makoto Nakamura, Shunsuke Tokunaga, Akira Aoki, the Joint Special Design Team for Fusion DEMO

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 537-545

Technical Paper / dx.doi.org/10.1080/15361055.2017.1364112

Engineering Challenges of W7-X: Improvement of Numerical Modeling and Mechanical Monitoring After Commissioning and First Phase of Operation

V. Bykov, J. Zhu, A. Carls, J. Fellinger, P. van Eeten, H.-S. Bosch, L. Wegener

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 546-558

Technical Paper / dx.doi.org/10.1080/15361055.2017.1352427

Radiation In-Port Cross-Talks for ITER Port Diagnostics

Arkady Serikov, Ulrich Fischer, David Anthoine, Luciano Bertalot, Maarten De Bock, Richard O’Connor, Rafael Juarez, Vitaly Krasilnikov

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 559-565

Technical Paper / dx.doi.org/10.1080/15361055.2017.1347470

Manufacture and Initial Thermo-Fluid Measurements on a Heat Sink Module for Potential Applications in a DEMO

J. R. Nicholas, P. T. Ireland, D. Hancock, D. Robertson

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 566-573

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350483

The Influence of Microstructure on Deuterium Retention in Polycrystalline Tungsten

L. M. Garrison, F. W. Meyer, M. E. Bannister

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 574-580

Technical Paper / dx.doi.org/10.1080/15361055.2017.1352431

Vacuum System and Modeling for the Materials Plasma Exposure Experiment

Arnold Lumsdaine, Steve Meitner, Van Graves, Craig Bradley, Chris Stone, Timothy Lessard, Dean McGinnis, Juergen Rapp, Tom Bjorholm, Robert Duckworth, Venugopal Varma

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 581-587

Technical Paper / dx.doi.org/10.1080/15361055.2017.1347466

Progress in the Development of a High Power Helicon Plasma Source for the Materials Plasma Exposure Experiment

R. H. Goulding, J. B. O. Caughman, J. Rapp, T. M. Biewer, T. S. Bigelow, I. H. Campbell, J. F. Caneses, D. Donovan, N. Kafle, E. H. Martin, H. B. Ray, G. C. Shaw, M. A. Showers

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 588-594

Technical Paper / dx.doi.org/10.1080/15361055.2017.1352429

Nuclear Heating and Radiation Damage in the NBI Region of the ITER Vacuum Vessel

Tim D. Bohm, Edward P. Marriott, Mohamed E. Sawan

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 595-600

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350484

A New RANS Model in Turbulent Channel Flow Imposed Wall-Normal Magnetic Field with Heat Transfer

Yoshinobu Yamamoto, Naoki Osawa, Tomoaki Kunugi

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 601-608

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350475

Radioactive Waste Studies in the Frame of the IEA Cooperative Program on the Environmental, Safety, and Economic Aspects of Fusion Power

M. Zucchetti, Z. Chang, L. El-Guebaly, Jung-Hoon Han, B. Kolbasov, V. Khripunov, M. Riva, Y. Someya, R. Testoni, K. Tobita

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 609-615

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350474

Design and Analysis of 140-Degree Miter Bend for High Power Electron Cyclotron Heating Transmission Lines

Joseph B. Tipton, Jr., Arnold Lumsdaine, Charles Schaich, Gregory R. Hanson

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 616-622

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350486

A High Power Helicon Antenna Design for DIII-D

A Nagy, J. deGrassie, C. Moeller, M. Hansink, B. Fishler, C. Murphy, R. I. Pinsker, H. Torreblanca, J. Tooker

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 623-627

Technical Paper / dx.doi.org/10.1080/15361055.2017.1347459

3D Thermal Analysis for CFETR Pre-Superheated Water-Cooled Blanket

A. Khodak, P. Titus, T. Brown, J. Klabacha, H. Nielsen, X. Cheng, S. Liu

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 628-633

Technical Paper / dx.doi.org/10.1080/15361055.2017.1350478

The Design and Use of Tungsten Coated TZM Molybdenum Tile Inserts in the DIII-D Tokamak Divertor

K. Holtrop, D. Buchenauer, C. Chrobak, C. Murphy, R. Nygren, E. Unterberg, M. Zach

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 634-639

Technical Paper / dx.doi.org/10.1080/15361055.2017.1347456

Electro-Magnetic Analysis of the ITER Upper Visible Infrared Wide Angle Viewing System

M. Smith, Y. Zhai, A. Jariwala, T. Edgemon, L. Konkel, M. Smiley, J. Vasquez, A. L. Verlaan, J. A. C. Heijmans

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 640-644

Technical Paper / dx.doi.org/10.1080/15361055.2017.1352423

Impact Property of Low-Activation Vanadium Alloy NIFS-HEAT-2 After Electron Beam Welding and Neutron Irradiation

Takuya Nagasaka, Haiying Fu, Nobuyuki Kometani, Takeshi Miyazawa, Takeo Muroga, Hideo Watanabe, Masanori Yamazaki, Takeshi Toyama

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 645-651

Technical Paper / dx.doi.org/10.1080/15361055.2017.1352428

Hydrogen Isotope Retention and Permeation in Neutron-Irradiated Tungsten and Tungsten Alloys Under PHENIX Collaboration

Masashi Shimada, Yasuhisa Oya, Dean A. Buchenauer, Yuji Hatano

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 652-659

Technical Paper / dx.doi.org/10.1080/15361055.2017.1347468

Fabrication Issues of Sandwich-Like Flow Inserts for Circular Pipes

C. Koehly, L. Bühler

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 660-666

Technical Note / dx.doi.org/10.1080/15361055.2017.1350477

Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components

Heiko Neuberger, Joerg Rey, Manuel Hees, Edeltraud Materna-Morris, Daniel Bolich, Jarir Aktaa, Andreas Meier, Stephen Fischer, Cornelia Schorle, Uwe Fuhrmann, Rainer Heger, Ivo Dlouhý, Ludek Stratil, Bernhard Kloetzer

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 667-672

Technical Note / dx.doi.org/10.1080/15361055.2017.1350521

Feasibility of Utilizing Tungsten Rod for Fusion Reactor Divertor

Shuhei Nogami, Wenhai Guan, Akira Hasegawa, Makoto Fukuda

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 673-679

Technical Note / dx.doi.org/10.1080/15361055.2017.1347463

Dissimilar-Metals Bonding Between NIFS-HEAT-2 Vanadium Alloy and Hastelloy X Nickel Alloy by Controlling Intermetallics

Haiying Fu, Takuya Nagasaka, Teruya Tanaka, Akio Sagara, Hisashi Serizawa, Yuhki Satou

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 680-685

Technical Note / dx.doi.org/10.1080/15361055.2017.1347469

EM Loads on ITER Diagnostics Equatorial Port Plug 9 and Its In-Port Components During Plasma Disruptions

Jingping Chen, Yuhu Zhai, Russell Feder

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 686-691

Technical Note / dx.doi.org/10.1080/15361055.2017.1347464

Ablation Simulation of Tungsten-Alternative Plasma-Facing Components due to Edge Localized Modes and Hard Disruptions

Jonathan Coburn, Mohamed Bourham

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 692-698

Technical Note / dx.doi.org/10.1080/15361055.2017.1352426

Heat Transfer Performance of a Water Impinging Jet Flow in a Metal Particle Bed

Kio Takai, Yoshiki Indou, Kazuhisa Yuki, Koichi Suzuki, Akio Sagara

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 699-704

Technical Note / dx.doi.org/10.1080/15361055.2017.1352430

Adiabatic Compression of a Compact Torus

S. Woodruff, J. E. Stuber, C. Bowman, P. E. Sieck, P. A. Melnik, C. A. Romero-Talamás, J. B. O’Bryan, R. L. Miller

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 705-712

Technical Note / dx.doi.org/10.1080/15361055.2017.1350488

Implantation of 30 keV Helium into Graphene-Coated Tungsten

M. X. Navarro, R. R. Delgado, M. G. Lagally, G. L. Kulcinski, J. F. Santarius

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 713-718

Technical Note / dx.doi.org/10.1080/15361055.2017.1350481

Preliminary Results of He Implantation in Tungsten at Angled Incidence in DAISIE

Matthew J. Jasica, Gerald L. Kulcinski, John F. Santarius

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 719-725

Technical Note / dx.doi.org/10.1080/15361055.2017.1350482

Numerical Simulation of the Interaction Between Z-Pinch Plasma and Foam Converter Using Code MULTI (#18353)

Fuyuan Wu, Rafael Ramis, Zhenghong Li, Yanyun Chu, Jianlun Yang, Zhen Wang, Shijiang Meng, Zhanchang Huang, Jiaming Ning

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 726-730

Technical Note / dx.doi.org/10.1080/15361055.2017.1347458

Neutron Generation in CANDOR, an Advanced-Fuel Fusion Experiment

M. Zucchetti, M. Riva, R. Testoni, L. Candido, B. Coppi

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 731-736

Technical Note / dx.doi.org/10.1080/15361055.2017.1347462

Thermohydraulic Assessment for the Modified Concept of the K-DEMO Divertor Target

Sungjin Kwon, Kihak Im, Jong Sung Park

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 737-746

Technical Note / dx.doi.org/10.1080/15361055.2017.1350479

Hydrogen Permeation Through Fluoride Molten Salt Mixed with Ti Powder

Ryosuke Nishiumi, Satoshi Fukada, Jun Yamashita, Kazunari Katayama, Akio Sagara, Juro Yagi

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 747-752

Technical Note / dx.doi.org/10.1080/15361055.2017.1347472

Study on Tritium Production Using a High-Temperature Gas-Cooled Reactor for Fusion Reactors: Evaluation of Tritium Outflow by Non-Equilibrium Diffusion Simulations

S. Nagasumi, H. Matsuura, K. Katayama, T. Otsuka, M. Goto, S. Nakagawa

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 753-759

Technical Note / dx.doi.org/10.1080/15361055.2017.1352424

Components Design and Analysis for the HCCR TBM Preliminary Design

Dong-Jun Kim, Seong Dae Park, Dong Won Lee, Mu-Young Ahn

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 760-765

Technical Note / dx.doi.org/10.1080/15361055.2017.1350487

Stress Analysis of the K-DEMO Vacuum Vessel

Han Zhang, Peter H. Titus, Thomas Brown

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 766-772

Technical Note / dx.doi.org/10.1080/15361055.2017.1352425

Characteristics of Gas Mixture Supply/Pressure Control Using Non-Evaporable Getters in a Discharge-Type Fusion Neutron Source

Yasushi Yamamoto, Hiroki Konda, Yuki Matsuyama, Hodaka Osawa, Masami Ohnishi

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 773-779

Technical Note / dx.doi.org/10.1080/15361055.2017.1347461

Assesment of Pumping Requirements in DEMO Reactor

Yu. Igitkhanov, Ch. Day, P. Lang, B. Plöckl

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 780-784

Technical Note / dx.doi.org/10.1080/15361055.2017.1347465

Impact of Annealing on Deuterium Retention Behavior in Damaged W

Shodai Sakurada, Yuki Uemura, Hiroe Fujita, Keisuke Azuma, Takeshi Toyama, Naoaki Yoshida, Tatsuya Hinoki, Sosuke Kondo, Yuji Hatano, Masashi Shimada, Dean Buchenauer, Takumi Chikada, Yasuhisa Oya

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 785-788

Technical Note / dx.doi.org/10.1080/15361055.2017.1350480

Evaluation of Interface and Cohesion Shear Strength of Mechanical Lap-Joint Between HTS Coated Conductors Intended for Segmented HTS Magnet

Luis E. Aparicio F., Satoshi Ito, Hidetoshi Hashizume

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 789-795

Technical Note / dx.doi.org/10.1080/15361055.2017.1350522

Study on Thermal Mixing of MHD Liquid Metal Free-Surface Film Flow

Koji Kusumi, Tomoaki Kunugi, Takehiko Yokomine, Zensaku Kawara, Egemen Kolemen, Hantao Ji, Erik P. Gilson

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 796-800

Technical Note / dx.doi.org/10.1080/15361055.2017.1347457

Numerical Investigation on Cooling Performance of Breeding Zone in HCCR TBM

Seong Dae Park, Dong Won Lee, Dong Jun Kim, Seungyon Cho

Fusion Science and Technology / Volume 72 / Number 4 / November 2017 / Pages 801-806

Technical Note / dx.doi.org/10.1080/15361055.2017.1347467

 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement