Online monitoring technology to extend calibration intervals of nuclear plant pressure transmitters

June 18, 2021, 1:55PMNuclear NewsH. M. Hashemian

Online monitoring (OLM) technology can be used in nuclear power plants as an analytical tool to measure sensor drift during plant operation and thereby identify the sensors whose calibration must be checked physically during an outage. The technology involves a procedure to (1) retrieve redundant sensor measurements from the process computer or through a separate data acquisition system, (2) calculate the average of these measurements and the deviation of each sensor from the average, and (3) identify any sensor that has deviated beyond its predetermined monitoring limit.

More from UWC 2020: Round 2

August 13, 2020, 5:07PMNuclear News

This year’s Utility Working Conference Virtual Summit, held on August 11, had a dynamic opening plenary and a packed roster of informative sessions. Following are recaps of some of the 2:00 p.m. (EDT) sessions that took place.

Don't miss Newswire's coverage of the opening plenary and the sessions at 12:00 pm.

U.S. NRC approved RadICS Platform

March 14, 2020, 9:26AMSponsored ContentRPC Radics LLC

List of authors:

  1. Mr. Ievgenii Bakhmach, “RPC Radics” LLC, Chief Executive Officer
  2. Mr. Ievgen Brezhniev, “RPC Radics” LLC, Strategic Marketing Director
  3. Mr. Vyacheslav Kharchenko, Director of Scientific and Technical Center, PC “RPC Radiy”
  4. Mark J. Burzynski, SunPort, Chief Executive Officer
  5. Sean Kelley, SunPort, Chief Operating Officer

Radiy is proud to present the RadlCS Digital Instrumentation and Control (l&C) Platform that was approved by the U.S. Nuclear Regulatory Commission (NRC) on July 31, 2019.