Nuclear News Asks: Who Inspired You?

December 18, 2020, 3:13PMNuclear News

This article presents responses from various community members about those who inspired them—or the events or things that inspired them—to go on to have careers in nuclear.

There is an interesting mix of inspirators here, the most prominent being teachers who had lasting effects on their students. There are others who offered inspiration, too, including parents and other family members.

What all the respondents have in common is their inherent drive and love of science and technology to keep nuclear moving forward.

We would like to hear your story. Write in to let us know about it and we will share it within the pages of Nuclear News.

NEDHO: A nuclear education alliance

December 11, 2020, 12:04PMNuclear NewsKostadin Ivanov, Todd Allen

The Nuclear Engineering Department Heads Organization (NEDHO) is an alliance of the heads (chairs) of about 30 nuclear engineering schools, departments, and programs in the United States. NEDHO is managed by an executive committee consisting of the chair, the chair-elect, and the three most immediate past-chairs. NEDHO meetings are normally held in conjunction with the American Nuclear Society’s national meetings. The NEDHO meetings are open to anyone, but on matters that require a vote, each institution is limited to a single official representative (i.e., one vote).

Idaho National Laboratory: Breaking new ground with the Advanced Reactor Demonstration Program

December 9, 2020, 7:01AMANS Nuclear CafeJoel Hiller

A renewed U.S. interest in advanced nuclear technology is making headlines around the world. Growing energy needs and an increased desire to limit carbon emissions are driving a flurry of activity among education institutions, national laboratories, and private companies. New nuclear technologies are rapidly maturing toward commercialization with the aim of deploying a new generation of advanced reactors. These advanced nuclear energy systems have the potential to provide cost-effective, carbon-free energy; create new jobs; and expand nuclear energy’s outputs beyond electricity generation alone.

“DOE and U.S. industry are extremely well-equipped to develop and demonstrate nuclear reactors with the requisite sense of urgency, which is important not only to our economy, but to our environment, because nuclear energy is clean energy,” Rita Baranwal, assistant secretary for Nuclear Energy, recently noted in a Department of Energy news release.

The DOE anticipates significant global demand for advanced reactors, and with support from Congress, intends to invest $3.2 billion over the next seven years in the new Advanced Reactor Demonstration Program (ARDP). The initial funding opportunity was announced in May 2020. The call specified the need for reactor technologies that improve on the safety, security, economics and/or environmental impact of currently operating reactor designs. The goal of the program is to maintain the nation’s leadership in the global nuclear energy industry through the successful research, design, and deployment of advanced reactors in the United States and international marketplaces.

The ARDP will provide funds for three phases of public-private technology development partnerships over the next decade and a half:

  1. Advanced Reactor Demonstrations: The initial $160 million funding allocation, announced in October 2020, will support two companies that can license, construct, and operate an advanced reactor design in the next five to seven years.
  2. Risk Reduction for Future Demonstration: The second phase of funding availability will support an additional two to five reactor designs that could be commercialized approximately five years after the Advanced Reactor Demonstrations. Awards are expected to be announced by the end of 2020.
  3. Advanced Reactor Concepts-20 (ARC-20): The third pathway to meet the advanced reactor demonstration goals will support up to two less mature reactor designs that will take a further five years to develop beyond the Risk Reduction phase.

From the ground up: Building a workforce for advanced nuclear

December 4, 2020, 2:01PMNuclear NewsMichelle Goff

INL will need technical, innovative, and safety-minded construction personnel for the advanced nuclear projects ahead. Photo: INL

Around the world, researchers in the energy industry are engaging in the work of studying, testing, and developing carbon-free energy solutions. Throughout these circles, many scientists and engineers are embracing the possibilities of advanced nuclear technologies, including small modular reactors and microreactors. While these innovative technologies are poised to address some of the nation’s biggest concerns, they also present their own unique challenges, including the need for a large and talented workforce within the construction industry.

Fortunately, the state of Idaho and its key nuclear players are well-equipped for this challenge. In southeastern Idaho, home of Idaho National Laboratory, strong partnerships throughout the region have forged networks between the lab and the educational institutions, employers, trades, and unions that are working to establish this highly specialized nuclear talent pipeline.

A day in the life of the nuclear community

November 25, 2020, 3:01PMNuclear News

The November issue of Nuclear News is focused on the individuals who make up our nuclear community.

We invited a small group of those individuals to tell us about their day-to-day work in some of the many occupations and applications of nuclear science and technology, and they responded generously. They were ready to tell us about the part they play, together with colleagues and team members, in supplying clean energy, advancing technology, protecting safety and health, and exploring fundamental science.

In these pages, we see a community that can celebrate both those workdays that record progress moving at a steady pace and the exceptional days when a goal is reached, a briefing is delivered, a contract goes through, a discovery is made, or an unforeseen challenge is overcome.

The Nuclear News staff hopes that you enjoy meeting these members of our community—or maybe get reacquainted with friends—through their words and photos.

Robotics for Plant Maintenance: Now and in the Future

November 20, 2020, 3:07PMNuclear NewsTobias Haswell

Diakont technicians prepare an NDE inspection robot for deployment into a diesel tank. Photos: Diakont

Robotics and remote systems have been used for supporting nuclear facilities since the dawn of the atomic age. Early commercial nuclear plants implemented varying levels of automation and remote operation, such as maintenance activities performed on the reactor pressure vessel and steam generators. Over the past several decades, there has been a steady progression toward incorporating more advanced remote operations into nuclear plants to improve their efficiency and safety. One of the primary forces driving the adoption of robotic tooling in U.S. nuclear power plants is money.

The economic model for the U.S. operating fleet has changed considerably over the past 10 to 12 years. Regulations in the nuclear industry have rarely decreased and, more often than not, have increased. This has led to nuclear plants in certain energy markets being hindered financially and thus needing to find ways to optimize their operations to do more with the resources they have. At the same time, the reliability and flexibility of robotics and automated systems have been increasing while their costs have been decreasing, making robotic systems much safer and more available to use. This has helped drive utilities to explore new ways of using robotics to overcome the obstacles they are facing. One of the obstacles that power plants have been tackling has been shortening the duration of their refueling outages to decrease their costs and increase their revenue.

Dixon and Hafen: An update on robotics and plant maintenance

November 13, 2020, 2:35PMNuclear NewsRick Michal

Joe Dixon

Hubert Hafen

Wälischmiller Engineering (HWM), of Markdorf, Germany, has joined forces with NuVision Engineering (NVE) to form NuVision-Wälischmiller under parent company Carr’s Engineering. The NVE-HWM team develops, demonstrates, and deploys engineered remote systems and robotics to meet the high safety standards, quality requirements, and challenging demands of the nuclear industry.

HWM specializes in remote-handling and robotic solutions for hazardous applications. Since 1946, HWM has been delivering a range of remote-handling solutions, including precision manipulators, tools, and controllers, to the nuclear industry.

NVE, founded in 1971, is headquartered in Pittsburgh, Pa., with major operational facilities in Charlotte, N.C. The company delivers engineered solutions and services to its customers in the nuclear markets of commercial power, research, isotope production, and government cleanup sectors. NuVision develops, demonstrates, and deploys technology-based solutions that help extend the life and safe operation of power plants, improve new plant designs, and remediate government-owned legacy waste sites.

Joe Dixon is the robotics director at NVE. For nearly 20 years, he has provided solutions for the global nuclear industry and has conceived, designed, fabricated, deployed, and managed teams for advanced robotics, isotope production, scientific research, decommissioning, energy production, process maintenance, and remote handling. Having worked on large projects around the world, Dixon is one of the industry’s leaders in remote-handling and robotics technologies.

Hubert Hafen is the chief technology officer for HWM. With more than 30 years of experience in the nuclear industry, Hafen has served as chief engineer and project manager for a large number of international remote-handling projects, such as remote-handling equipment for the decommissioning of the Greifswald nuclear power plant in Germany, the decommissioning of the reprocessing plant in Karlsruhe, Germany, planning for the remote equipment for the ITER project, and several remote-handling projects in Japan, Russia, China, the United Kingdom, France, and Germany. His ability to present clients with problem solving has made him renowned in the robotics world.

Dixon and Hafen talked recently with Nuclear News editor-in-chief Rick Michal about what is new in robotics and remote-handling systems.

Solving Sellafield’s 4 Ds problem

November 6, 2020, 3:44PMNuclear Newsthe U.K. National Nuclear Laboratory and Sellafield Ltd

The U.K. National Nuclear Laboratory’s Colin Fairbairn (left) and Ben Smith (in pre-COVID days) work on the Box Encapsulation Plant (BEP) robots project at the NNL’s facility in Workington, Cumbria, U.K. Photos: UKNNL

Though robotics solutions have been used across many industries, for many purposes, Sellafield Ltd has begun to bring robotics to the U.K. nuclear industry to conduct tasks in extreme environments. The Sellafield site, in Cumbria, United Kingdom, contains historic waste storage silos and storage ponds, some of which started operations in the 1950s and contain some of the most hazardous intermediate--level waste in the United Kingdom. There is a pressing need to decommission these aging facilities as soon as possible, as some of them pose significant radiation risk.

A life in nuclear reactor physics and design

November 3, 2020, 7:00AMANS Nuclear CafeWeston M. Stacey

You may have read the abbreviated version of this article in the November 2020 issue of Nuclear News. Now here's the full article—enjoy!

I have enjoyed a long and stimulating career in applied nuclear physics—specifically nuclear reactor physics, nuclear fusion plasma physics, and nuclear fission and fusion reactor design—which has enabled me to know and interact with many of the scientists and engineers who have brought the field of nuclear energy forward over the past half-century. In this time I have had the fortune to interact with and contribute (directly and indirectly) to the education of many of the people who will carry the field forward over the next half-century.

Robotics at Palo Verde

October 30, 2020, 2:09PMNuclear NewsRick Michal

The Zephyr system uses probes for steam generator inspections. Photos: APS

The Palo Verde Nuclear Generating Station, a three-unit pressurized water reactor plant operated by Arizona Public Service Company, has started using an inspection technology relatively new to the nuclear industry. The technology, called smart pigs (an acronym for “piping inline gauges”), has previously been employed by oil and gas companies for inspecting and cleaning underground pipes. After testing and analyzing smart pig products from several companies, Palo Verde’s underground piping consultant, Dan Wittas, selected a smart pig suitable for navigating the tight-radius bends in the plant’s spray pond piping. The spray pond system consists of piping, a pump, and a reservoir where hot water (from the Palo Verde plant) is cooled before reuse by pumping it through spray nozzles into the cooler air. Smart pigs work by using the water’s flow through the piping to move an inspection tool within the pipe itself. The technology replaces the previous method of pipe inspection, in which various relatively small sections of piping were unearthed and directly inspected, and were considered to be representative examples of the overall piping condition. In contrast, the smart pigs obtain corrosion levels for the length of piping traveled through and allow a corrosion baseline to be established.

ATRC Upgrade

October 16, 2020, 2:18PMNuclear NewsJoseph Campbell

Reactor operators Craig Winder (foreground) and Clint Weigel prepare to start up the ATRC Facility reactor at Idaho National Laboratory after a nearly two-year project to digitally upgrade many of the reactor’s key instrumentation and control systems. Photos: DOE/INL

At first glance, the Advanced Test Reactor Critical (ATRC) Facility has very little in common with a full-size 800- or 1,000-MW nuclear power reactor. The similarities are there, however, as are the lessons to be learned from efforts to modernize the instrumentation and control systems that make them valuable assets, far beyond what their designers had envisioned.

One of four research and test reactors at Idaho National Laboratory, the ATRC is a low-power critical facility that directly supports the operations of INL’s 250-MW Advanced Test Reactor (ATR). Located in the same building, the ATR and the ATRC share the canal used for storing fuel and experiment assemblies between operating cycles.

Vision 2020

October 9, 2020, 3:14PMRadwaste SolutionsMackenzie Kerr

On March 9, the Department of Energy’s Office of Environmental Management (EM) released its first strategic plan in several years. Titled “A Time of Transition and Transformation: EM Vision 2020-2030,” and called the Strategic Vision1, the document outlines the past accomplishments in cleaning up legacy nuclear waste and provides a broad overview of the initiatives that EM plans to put into motion over the next decade, “laying the groundwork for a long-term plan to realize meaningful impact on the environmental cleanup mission.”2

Tapping Nonnuclear Knowledge

October 2, 2020, 3:39PMRadwaste SolutionsDiletta Colette Invernizzi, Nick Higginson, Richard Howells, Willem Van Es, and Ian Beadle
The Deepsea Delta oil-drilling platform in the North Sea. The dismantling of such large oil and gas structures may offer lessons that can be applied to nuclear decommissioning.

Within the energy sector, the management of projects and megaprojects has historically focused on the planning and delivery of the construction of infrastructure [1–3]. Therefore, policies are more oriented to support the construction of infrastructure rather than its decommissioning. Globally, however, a number of facilities have reached or will soon reach their end of life and need to be decommissioned.

These facilities span the energy sector, including nuclear power plants, oil and gas rigs, mines, dams, etc., whose decommissioning present unprecedented technical and socioeconomic challenges [4–7]. Moreover, the cost of decommissioning and waste management of this array of infrastructure is estimated to reach hundreds of billions of dollars and, for most of these projects, keeps increasing, with limited cross-sectorial knowledge-transfer to mitigate the spiraling increase of these figures.

Cross-sectorial knowledge-transfer is one way to tackle this matter and improve the planning and delivery of decommissioning projects. The aim of our research has been to build a roadmap that is designed to promote the sharing of good practices between projects both within the same industry and across different industrial sectors, focusing specifically on major decommissioning and waste-management challenges.

To reach this aim, our research leverages on the experience of senior industry practitioners and their involvement in the decommissioning and waste management of infrastructure in different sectors. More specifically, this research addresses the following questions:

To what extent can lessons learned be transferred across industrial sectors?

What are the challenges that hinder successful cross-sectorial knowledge-transfer?

The Road to Utah

September 28, 2020, 9:11AMRadwaste Solutions

Six large trucks were used to push and pull the SONGS-1 reactor pressure vessel 400 miles through Nevada and into Utah with a maximum speed of 10 miles per hour over a 10-day period. Photo: EnergySolutions

July 14 marked a milestone in the decommissioning of the San Onofre Nuclear Generating Station (SONGS), as the Unit 1 reactor pressure vessel (RPV) completed a seven-week journey from Southern California to EnergySolutions’ Clive disposal facility in Utah. The approximately 670-ton RPV package, containing the pressure vessel from the previously decommissioned SONGS-1, pieces of radioactive metal, and grout for radiation shielding, left San Onofre on May 24, traveling by rail to a location outside Las Vegas, where it was transferred to a platform trailer to be transported the remaining 400 miles to Clive, about 75 miles west of Salt Lake City.

“This project was a very complex undertaking that required approvals and/or coordination with over two dozen federal, state, and local agencies and government entities,” said Todd Eiler, director of the EnergySolutions Projects Group, which handled the transport. “The coordinated effort with the rail lines and departments of transportation in California, Nevada, and Utah resulted in another safe and successful large component shipment managed by the EnergySolutions Projects Group.”

The NRC’s Operations Center: Exercising authority to respond

September 21, 2020, 9:36AMNuclear NewsSusan Gallier

One essential lesson from the events at Three Mile Island-2 in March 1979 can be summed up in three words: Preparedness takes practice. The emergency response capacity of the Nuclear Regulatory Commission and nuclear plant operators is more than just a set of procedures. Active training and evaluation are required to coordinate effectively with local and state authorities and protect the public in the event of an off-site radiological release.

The NRC’s emergency preparedness and incident response teams work in the Office of Nuclear Security and Incident Response (NSIR) to support licensees’ mandated emergency preparedness programs. The Operations Center at NRC headquarters is staffed around-the-clock with NSIR officers who can respond to technical questions and evaluate licensee event reports, yet most of its infrastructure typically stands vacant, awaiting activation for an incident or a planned exercise. With full activation of the NRC’s incident response program, the Operations Center comes to life, and teams of staff populate workstations. That process is regularly tested during exercises that involve NRC licensees, state and local responders, and similar incident response centers at each of the NRC’s four regional offices.

No two exercises are the same. Not only is every exercise dependent on variable human performance and every plant located in a unique community, but emergency preparedness benchmarks continually evolve with advancements in technologies and procedures.

Harnessing the promise of radiation: The art of reasonableness

September 11, 2020, 3:04PMNuclear NewsPaul Locke, Amir Bahadori, Antone Brooks, Shaheen Dewji, Mary Lou Dunzik-Gougar, Marilyn Kray, and Alan Waltar

Radiation has benefited mankind in many ways, including its use as an energy source and an indispensable tool in medicine. Since the turn of the 20th century, society has sought ways to harness its potential, while at the same time recognizing that radiological exposures need to be carefully controlled. Out of these efforts, and the work of many dedicated professionals, the principles of justification, optimization, and limitation have emerged as guiding concepts.

Justification means that the use of radiation, from any radiation source, must do more good than harm. The concept of optimization calls for the use of radiation at a level that is as low as reasonably achievable (ALARA). Dose constraints, or limitation, are meant to assist in reaching optimization and protection against harm by setting recommended numerical levels of radiation exposure from a particular source or sources. Together, these three principles form the bedrock of the international radiation protection system that drives decision-­making and supports societal confidence that radiation is being used in a responsible manner.

Consortium participates in National Academies webinar on low-dose radiation

September 4, 2020, 12:07PMNuclear News

The National Academies of Sciences, Engineering, and Medicine (NAS) has begun a new webinar series, with the first entry titled “What’s new in low-dose radiation.” The July 22 event kicked off the Gilbert W. Beebe Webinar Series—an extension of the Beebe Symposium, which was established in 2002 to honor the scientific achievements of the late Gilbert Beebe, NAS staff member and designer/implementer of epidemiologic studies of populations exposed to the atomic bombings of Hiroshima and Nagasaki as well as the Chernobyl accident.


Can chemical heat pumps for integrated energy systems and industrial applications change the world?

August 28, 2020, 3:27PMNuclear NewsVivek Utgikar, Piyush Sabharwall, and Brian Fronk

Nuclear energy is faced with a number of challenges in a changing energy landscape, driven by the need to reduce carbon emissions to mitigate climate change. Renewable energy technologies are being considered as the solution to climate change and are increasingly being deployed across the world. However, renewable energy sources, particularly solar and wind, are highly variable, and deployment of these technologies has resulted in significant perturbances in the energy market, raising questions about grid stability and the adaptability of other sources to compete in a changing marketplace that prioritizes renewables. Nuclear plants, well suited for baseload operation, have demonstrated technical capability and flexibility to respond to the fluctuating demand; however, they have also discovered that the economics of such operating mode are not necessarily optimal to their financial security. On the other hand, despite contributing to the carbon emissions, the low cost of abundantly available natural gas and resultant low-cost electricity have exacerbated the economic pressure on nuclear technologies, raising questions about their survival and role in future energy systems1.

Limerick’s safe outage during the pandemic: A refueling success story

July 24, 2020, 3:38PMNuclear NewsBryan Hanson

Limerick Nuclear Power Plant

Refueling a nuclear reactor under normal circumstances can be a challenging endeavor, with hundreds of maintenance activities and inspections to perform in a short window of time, and more than a thousand supplemental workers on-site to complete the work safely and effectively. But these are anything but normal circumstances.

Remote fuel cleaning from across the globe

July 17, 2020, 3:43PMNuclear NewsRick Michal

Around the world in the mid-March time frame, conditions were changing rapidly due to the COVID-19 pandemic, as was everyone’s understanding of it. For nuclear power plants, the pandemic meant dealing with new government regulations and restrictions that were put in place. “U.S.-based support of international clients was especially challenging,” said Mike Little, president and principal officer of Reston, Va.–based Dominion Engineering Inc. (DEI). “With border closures going into effect, we were not only focusing on the health and safety of our workers abroad, but also making sure they would be able to return home. Providing remote subject matter expertise from the U.S. through our international service partners was critical to successful job execution during this time.”