China launches fusion consortium to build “artificial sun”

January 9, 2024, 9:30AMNuclear News
The HL-2M tokamak reactor, developed by the CNNC’s Southwestern Institute of Physics. (Photo: CNNC)

The government of China has formed a new national industrial consortium focused on the development and advancement of nuclear fusion technology, news outlets have reported.

HPR1000 passes U.K. design assessment

February 14, 2022, 12:05PMNuclear News
[Click to view full image] Cutaway of the HPR1000 design. (Image: CGN)

The Office for Nuclear Regulation (ONR) and the Environment Agency (EA) have found the UK HPR1000 reactor suitable for construction in the United Kingdom, the regulators jointly announced last week.

Industry, IAEA form panel to address global challenges

September 28, 2021, 7:18AMNuclear News

More than a dozen of the world’s leading nuclear industry executives have teamed up with the International Atomic Energy Agency to form the Group of Vienna, with the aim of using nuclear technologies to address global challenges, including climate change, disease, and hunger.

First Hualong One reactor connected to grid

December 2, 2020, 6:59AMNuclear News

China’s Fuqing nuclear plant. Photo: CNNC

Unit 5 at China National Nuclear Corporation’s (CNNC) Fuqing nuclear plant in southeastern China’s Fujian Province has become the world’s first Hualong One reactor to be connected to the power grid, the company announced on November 27. “It was confirmed on-site that all technical indicators of the unit met the design requirements and that the unit was in good condition,” CNNC said.

Fuel loading at Fuqing-5 began on September 4, following the issuance of the reactor’s operating license by China’s Ministry of Ecology and Environment. The loading of 177 sets of fuel assemblies was completed on September 10, and initial criticality was achieved on October 21. The unit is scheduled to enter commercial operation before the end of the year.

Also known as the HPR1000, the Hualong One is a Chinese-designed and -developed 1,000-MWe Generation III pressurized water reactor, incorporating design elements of CNNC’s ACP1000 and China General Nuclear’s ACPR1000+ reactors. Fuqing-5’s twin HPR1000, Fuqing-6, is scheduled to start contributing power to the grid next year.

Fuel loading begins at first Hualong One unit

September 9, 2020, 3:00PMNuclear News

Fuel loading begins at Fuqing-5. Photo: CNNC

The loading of 177 fuel assemblies into the reactor core of Unit 5 at the Fuqing nuclear power plant began on September 4, following the issuance of the unit’s operating license from China’s Ministry of Ecology and Environment, the China National Nuclear Corporation (CNNC) announced on September 8. Construction of the reactor began in May 2015.

Unit 5 will be the first of the Hualong One reactors to enter commercial operation, expected later this year if all goes according to plan. Also known as the HPR1000, the Hualong One is a 1,000-MWe Generation III pressurized water reactor, indigenous to China. Unit 5’s twin HPR1000 at Fuqing, Unit 6, is scheduled to start contributing power to the grid next year.

Located in China’s Fujian Province, Fuqing also houses four 1,000-MWe CPR-1000 PWRs, with commercial start dates of November 2014, October 2015, October 2016, and September 2017, respectively.