American Nuclear Society
Home

Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 45 / Number 2 / Pages 202-205

Fabrication of Gas-Filled Tungsten-Coated Glass Shells

A. Nikroo, W. Baugh, D. A. Steinman

Fusion Science and Technology / Volume 45 / Number 2 / Pages 202-205

March 2004

Format:

Price:$30.00
Member Price:$27.00
Member Savings:$3.00

Deuterium (D2) filled glass shells coated with a high Z element are needed for high energy density (HED) experiments by researchers at Los Alamos National Laboratory. We report here on our initial attempt to produce such shells. Glass shells made using the drop tower technique were coated with gold, palladium or tungsten, or a mixture of two of these elements. It was found that gold and palladium coatings did not stick well to the glass and resulted in poor or delaminated films. Tungsten coatings resulted in films suitable for these targets. Bouncing of shells during coating resulted in uniform tungsten coatings, but the surface of such coatings were filled with small nodules. Proper agitation of shells using a tapping technique resulted in smooth films with minimal particulate contamination. For coating rates of ~0.15 m/hr coatings with ~2 nm RMS surface finish could be deposited. The surface roughness of coatings at higher rates, 0.7 m/hr, was considerably worse (~100 nm RMS). The columnar structure of the coatings allowed permeation filling of the tungsten coated glass shells with deuterium at 300°C.

 
 
 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement