American Nuclear Society
Home

Home / Store / Journals / Electronic Articles / Nuclear Technology / Volume 161 / Number 3 / Pages 315-328

Feasibility of Lead-Bismuth-Cooled Accelerator-Driven System for Minor-Actinide Transmutation

K. Tsujimoto, H. Oigawa, K. Kikuchi, Y. Kurata, M. Mizumoto, T. Sasa, S. Saito, K. Nishihara, M. Umeno, H. Takei

Nuclear Technology / Volume 161 / Number 3 / Pages 315-328

March 2008

Format:

Price:$30.00
Member Price:$27.00
Member Savings:$3.00

The feasibility for the lead-bismuth-cooled accelerator-driven system (ADS) to transmute minor actinides partitioned from high-level radioactive waste is discussed. Since lead-bismuth will cause considerable corrosion and erosion effects at high temperature, the fuel-clad temperature must be kept as low as possible. Moreover, the most critical issue of the ADS design is the engineering viability of the high-power spallation target and the beam window. The thermal-hydraulic and structural analysis was carried out for both the fuel assembly and the beam window. In addition to the analysis in steady state, the transient behaviors were also studied during typical transient and unprotected accidents. The results showed that engineering viability is reasonably achievable in the nominal operation. For the beam trip, which will be the most frequent transient, the number of events to cause the failure of the beam window is estimated as more than 105. For safety aspects of the ADS during unprotected accidents, the estimated results showed that unprotected loss of flow would cause the most significant problem, if the beam operation was kept. Therefore, high reliability of the beam shutdown is required for the ADS safety.

 
 
 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement