Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 43 / Number 3 / Pages 270-274
T. Endo, N. Kobayashi, K. Goto, M. Yasuda, Y. Fujima
Fusion Science and Technology / Volume 43 / Number 3 / Pages 270-274
Format:electronic copy (download)
Experiments on the wall-thickness dependence of the cooling-induced deformation (CID) of polystyrene (PS) spherical shells were carried out. For the experiments, the PS shells were fabricated by the density-matched emulsion method using the hand-shaken microencapsulation technique. The number-averaged and weight-averaged molecular weights of the PS were Mn = 1.1 × 105 and Mw = 4.0 × 105, respectively. The diameter of the PS shells was ~400-550 m. To investigate the wall-thickness dependence of the CID, the wall thickness of the PS shells was varied between 5 and 60 m. In the experiments, the PS shells were cooled by using liquid nitrogen, and their images were captured at 0 and -190°C. For the investigation of the CID, two shapes of each shell that were measured at 0 and -190°C were compared. The thinner PS shells showed larger CID. The maximum deformation was almost 1% of the outer radius when the shell aspect ratio (outer radius)/(wall thickness) was higher than 20. The repeatability of the CID was studied, and the results implied that residual stress in the PS shells had an influence on the CID.
Your cart is empty.
Home|Invoice Payment|Nuclear Links