American Nuclear Society
Home

Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 41 / Number 3P1 / Pages 238-241

Thick GDP Microshells for LIL and LMJ Targets

M. Theobald, O. Legaie, P. Baclet, A. Nikroo

Fusion Science and Technology / Volume 41 / Number 3P1 / Pages 238-241

May 2002

Format:

Price:$30.00
Member Price:$27.00
Member Savings:$3.00

Amorphous hydrogenated carbon (a-C:H) is the nominal ablator to be used in French inertial confinement fusion (ICF) experiments. These capsules, containing the deuterium-tritium mixture, are developed for the LIL (Laser Integration Line) and the future Megajoule laser (LMJ) of the CEA. Coatings are prepared by glow discharge polymerization (GDP) with trans-2-butene and hydrogen. The films properties have been investigated. Laser fusion targets must have optimized characteristics : a diameter of about 1 mm for LIL targets and about 2.4 mm for LMJ targets, a thickness up to 175 μm, an outer and an inner roughness lower than 20 nm at high modes, a sphericity and a thickness concentricity better than 99%. This paper presents the first microshells obtained at the CEA with a GDP (Glow Discharge Polymerization) coater. Amorphous hydrogenated carbon shells of 175 μm with 1 mm or 2.4 mm diameter have been successfully prepared. The measured roughness at high modes is lower than 10 nm for a 30×30 μm characterization window.

 
 
 
Questions or comments about the site? Contact the ANS Webmaster.
advertisement