Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 63 / Number 2 / Pages 87-94
W. T. Shmayda, D. R. Harding, V. A. Versteeg, C. Kingsley, M. Hallgren, S. J. Loucks
Fusion Science and Technology / Volume 63 / Number 2 / Pages 87-94
Format:electronic copy (download)
Debris with footprints smaller than 40 m2 on the outer and inner surfaces with heights of <10 m on outer surfaces and [approximately]1 m on inner surfaces is present on cryogenic targets used for inertial confinement fusion studies on OMEGA. These features form during the gas-filling and cooling processes used to produce cryogenic deuterium (D2) and deuterium-tritium (DT) targets. The amount of debris on the surface has varied since the inception of the Laboratory for Laser Energetics' (LLE's) cryogenic program. The cause of the contamination is attributed to the cryogenic equipment high-vacuum and cleanliness limitations and to the radiolytic degradation of polymers. Empirical observations and a review of the processing conditions suggest that 1 mol of condensable contaminant is sufficient to account for the debris observed on a typical cryogenic target. This translates into a 3-ppm impurity content in the DT fuel.This paper focuses on condensed gases as one source of debris. It is postulated that methane, water, and nitrogen accompany the DT fuel transfer when it is transferred from the uranium storage beds that hold the DT fuel to the permeation cell where the targets are filled.
Your cart is empty.
Home|Invoice Payment|Nuclear Links