Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 60 / Number 1 / Pages 417-421
S. Nogami, J. Miyazaki, T. Nagasaka, A. Hasegawa, T. Muroga
Fusion Science and Technology / Volume 60 / Number 1 / Pages 417-421
Format:electronic copy (download)
The hardness distribution and the effect of post welding heat treatment (PWHT) at 600°C and 1000°C for 1 h and aging heat treatment at 600°C for 1000 h in the dissimilar-material electron beam weld (EBW) joint with pure-V and SUS316L austenitic stainless steel were investigated. The electron beam was positioned just on the butt joint (EB00), shifted by 0.2 mm (EB02) and 0.4 mm (EB04) on the pure-V side. The EBW joint was distinguished into the base metal of V (V-BM), weld metal (WM), interlayer at the edge of the WM of SUS316L side (IL) and base metal of SUS316L (SUS316L-BM). The IL was observed only in the EB02 and EB04 joints. The formation of macro-pore was observed in the EB04 joint. Much higher hardness was observed at the WM and IL of the as-welded EB00 and EB02 joints than the other regions of them. The hardness change in the WM was relatively small due to the PWHT at 600°C up to 1 h, whereas significant increment was observed due to the PWHT at 1000°C for 1 h regardless of the EB position. The hardness of the IL after the PWHT at 600°C was almost twice higher than that of the as-welded one, which showed slightly further increment at 1000°C. Rapid increment of the hardness due to the aging at 600°C for 1–10 h and slightly further increment of it due to the aging for 100–500 h occurred in the WM of the EB00 joint.
Your cart is empty.
Home|Invoice Payment|Nuclear Links