American Nuclear Society

Home / Store / Journals / Electronic Articles / Fusion Science and Technology / Volume 60 / Number 1

Development of the Lead Lithium (DCLL) Blanket Concept

S. Malang, M. Tillack, C. P. C. Wong, N. Morley, S. Smolentsev

Fusion Science and Technology

Volume 60 / Number 1 / July 2011 / Pages 249-256


Member Price:$27.00
Member Savings:$3.00

Liquid metal breeders such as Lithium or the eutectic Lead-Lithium alloy PbLi have the potential for attractive breeding blankets, especially if the liquid metal serves as breeder and coolant. However, cooling of first wall and blanket structure is a challenging task because the magnetic field degrades the heat transfer and can cause a really high pressure drop. To overcome these problems, dual coolant blankets with helium cooled FW/blanket structure and a self-cooled breeding zone had been proposed, with electrical insulation by ceramic-coatings or sandwich flow channel inserts. Such concepts are in principle simpler than helium cooled blankets, but the thermal efficiency is limited to ~35 % as in any helium cooled blankets with steel structure. A much higher efficiency up to about 45 % became feasible when the sandwich insulator was replaced by flow channel inserts (FCI) made of a SiC composite. This FCI serves as thermal insulator too, allowing an exit temperature of ~700° C, suitable for a BRAYTON cycle power conversion system.

The subject of this paper is a description of the Lead-Lithium blanket development and the major improvements on the dual coolant Lead-Lithium (DCLL) blanket concept achieved in the US during the last 10 years.

Questions or comments about the site? Contact the ANS Webmaster.