ANS American Nuclear Society
ANS
ANS HomeAboutMembersJoinContactSearch
Journals

Content

Publications
ANS > Publications > Journals > Nuclear Technology > Volume 129
First In-Pile Experimental Results of High-Plutonium-Content Oxide Fuel for Plutonium Burning in Fast Reactors

Volume 129 · Number 1 · January 2000 · Pages 1-12
Technical Paper · Fission Reactors

Emmanuelle Picard, Jean Noirot, Raymond L. Moss, Helmut Plitz, Karl Richter, Jacques Rouault

ANS Store:  Purchase Article

An experimental program focused not only on the study of high-plutonium-content mixed-oxide fuels but also on more advanced "Pu without U" fuel concepts has been launched in the framework of the Consommation Accrue de Plutonium dans les RApides (CAPRA) project. First results of the in-pile and out-of-pile behavior of high-plutonium-content fuels with uranium, such as (U55%,Pu45%)O2, and (U55%,Pu40%,Np5%)O2, and also without uranium, such as (Pu44%,Ce56%)O2, are now available. In particular, the Irradiation à FOrt Pu (IFOP) experiment in the SILOE reactor and the TRAnsmutation and Burning of ActiNides in Triox carrier (TRABANT1) experiments in the High Flux Reactor are presented and the results are analyzed: Up to a burnup of 1.5 at.%, destructive examinations of the IFOP pin have shown that the high-plutonium-content oxide fuel with a large central hole presents the usual global behavior (good pellet integrity, fuel microstructure). The TRABANT1 oxide fuel pin with a 40% Pu and 5% Np content demonstrates that a burnup of 9.5 at.% can be reached without failure by a high-plutonium-content fuel. However, the TRABANT1 pin 1 (oxide pin with 45% Pu), which had run under severe conditions, has failed at ~7 at.% burnup. Destructive examinations of these pins will give more evidence on the causes of the failure. The low-oxygen-to-metal fuel column of (Pu,Ce)O2-x melted, thus confirming the poor conductivity of this fuel.

<< Return to Volume 129
Questions or comments about the American Nuclear Society web site?  Contact the ANS Webmaster.