|
|
|
Drag Coefficients for Reactor Loose Parts
Volume 127 · Number 1 · July 1999 · Pages 24-37
Technical Paper · Thermal Hydraulics
Liang Shi, J. Michael Doster, Charles W. Mayo
ANS Store: Purchase Article
To estimate the range of impact velocities of potential reactor loose parts (LPs) requires information on regional flow velocities, LP mass, and LP drag coefficients. Flow velocities and the mass of potential LPs can generally be bounded and therefore are assumed to be known. In this work, drag coefficients for prototype LP shapes, including objects such as bolts, nuts, pins, and hand tools, were measured in the fluid velocity range typical of reactor coolant systems. Unlike drag coefficients measured for stationary objects, or by moving a body through a stagnant fluid, these experiments are performed on objects moving freely in a turbulent flow stream. In general, the measured drag coefficients for all tested LP shapes are shown to be close to the standard drag coefficient for a sphere, especially in the low-Reynolds-number region. However, significant differences exist in the wake transition region, which indicates that the drag coefficient for a freely moving body in turbulent flow is different from the drag coefficient for a confined body under the same flow conditions or for a body moving in a stagnant fluid.
|
|
|
|
