ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Operations & Power
Members focus on the dissemination of knowledge and information in the area of power reactors with particular application to the production of electric power and process heat. The division sponsors meetings on the coverage of applied nuclear science and engineering as related to power plants, non-power reactors, and other nuclear facilities. It encourages and assists with the dissemination of knowledge pertinent to the safe and efficient operation of nuclear facilities through professional staff development, information exchange, and supporting the generation of viable solutions to current issues.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Apr 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
May 2024
Nuclear Technology
Fusion Science and Technology
Latest News
NRC updating GEIS rule for new nuclear technology
The Nuclear Regulatory Agency is issuing a proposed generic environmental impact statement (GEIS) for use in reviewing applications for new nuclear reactors.
In an April 17 memo, NRC secretary Carrie Safford wrote that the commission approved NRC staff’s recommendation to publish in the Federal Register a proposed rule amending 10 CFR Part 51, “Environmental Protection Regulations for Domestic Licensing and Related Regulatory Functions.”
L. C. Carlson, P. Fitzsimmons, S. Pajoom, R. Petzoldt, A. Tambazidis, D. Harding, R. Chapman, J. Ulreich, M. Wittman
Fusion Science and Technology | Volume 73 | Number 2 | March 2018 | Pages 107-118
Technical Paper | doi.org/10.1080/15361055.2017.1406240
Articles are hosted by Taylor and Francis Online.
Capsule fill-tube target assemblies (CFTAs) for direct drive have been demonstrated in the past for Laboratory for Laser Energetics (LLE) cryogenic layering studies, evolving and building upon successful deliveries for the National Ignition Facility [Saito et al., Fusion Sci. Tech., Vol. 55, p. 337 (2009); Johal et al., Fusion Sci. Tech., Vol. 55, p. 331 (2009); Saito et al., Fusion Sci. Tech., Vol. 59, p. 271 (2011); Moreno et al., Fusion Sci. Tech., Vol. 59, p. 46 (2011); and Rice et al., High Power Laser Sci. Eng., Vol. 5, p. 7 (2017)]. The current 100 Gigabar (GBar) Campaign requires tighter specifications over prior CFTA work in terms of robustness and reduced fill-tube diameter and glue spot size, which impact the survivability of the CFTA. To tackle these challenges, General Atomics and LLE are developing a direct-drive CFTA that survives all fabrication activities, from assembly and qualification testing to transport, cryogenic layering, and target chamber insertion at the Omega Laser Facility.
Fifty-five CFTAs of three main designs have been constructed and tested to date, building off the current LLE cryogenic layering study of CFTA design (typically 870-μm-diameter × 25-μm-thick wall capsule). Variations of glass fill tube sizes ranged from 30, 20, and 10 µm in diameter. Testing protocols were developed to enable comparison of different designs against one another and to evaluate their robustness at room temperature. The testing protocols include leak checks, resonant vibration mode identification, and vibration survival testing against a power spectral density input. This paper compares the different design trade-offs, measurements, and results including room temperature survivability, ringdown response, leak tests, and scanning electron microscope images taken of failed fill tubes and glue joints. A design recommendation is put forth meeting the design constraints, which consists of a polymicro-composite tube and 10-µm fill tube, ensuring survivability at cryogenic temperature, a higher first-resonance mode, and smaller fuel volume.