ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Robotics & Remote Systems
The Mission of the Robotics and Remote Systems Division is to promote the development and application of immersive simulation, robotics, and remote systems for hazardous environments for the purpose of reducing hazardous exposure to individuals, reducing environmental hazards and reducing the cost of performing work.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Mar 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
April 2024
Nuclear Technology
Fusion Science and Technology
February 2024
Latest News
Can hydrogen be the transportation fuel in an otherwise nuclear economy?
Let’s face it: The global economy should be powered primarily by nuclear power. And it probably will by the end of this century, with a still-significant assist from renewables and hydro. Once nuclear systems are dominant, the costs come down to where gas is now; and when carbon emissions are reduced to a small portion of their present state, it will become obvious that most other sources are only good in niche settings. I mean, why use small modular reactors to load-follow when they can just produce that power instead of buffering it?
R.W. Springer, B.J. Cameron, G.A. Reeves
Fusion Science and Technology | Volume 31 | Number 4 | July 1997 | Pages 449-455
Technical Paper | Eleventh Target Fabrication Specialists' Meeting | doi.org/10.13182/FST97-A30800
Articles are hosted by Taylor and Francis Online.
A new ion beam technology has been developed which allows the specific control of a number of material parameters not previously or easily controlled during thin film fabrication. The new device is a modified Kaufman ion source. The principal differences are in the design of the grids, and the fact that the gun has an open bottom structure. An additional grid has been added on the bottom to contain the plasma and force the gun to be “unidirectional.” The gun operates by forming an electron driven plasma in the center, while allowing evaporated material to pass through this plasma. When the material moves through the plasma, it may also be ionized by the Penning process, or by electron impact. The voltage of the plasma, referenced to the substrate, may be adjusted from ∼100 volts to ∼1000 volts. As the ionized plasma and deposit leave the chamber, they pass by a hot filament which provides electrons to create a charge neutral beam. Thus both insulating and conducting materials may be deposited on both insulating and conducting substrates. Another important property that can be controlled using the FTIG is the orientation of the crystal structure. Films of MgO and YSZ have been deposited in an oriented state. These cubic structures can be “forced” to a preferred 111, 220, 200, or random orientation, depending on the rate of deposit and gun voltage. A practical example of a solved problem using new modeling techniques and the Flow Through Ion Gun (FTIG) is described. The problem is to apply a platinum coating to aluminum which forms an oxide and makes film adhesion difficult with noble metals. The FTIG was used to pre-clean the inside surface, and subsequently deposit gold. Due to the aspect ratio of the cylinder, two cleaning and deposit cycles were required. Platinum distributions from an electron beam gun were used to compute a thickness uniformity on the inside of the cylinder. The uniformity was computed and measured to be ∼10% from end to end. The film microstructure was compared with thin film ballistic computations using SIMBAD, and the agreement found to be excellent.