ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Aerospace Nuclear Science & Technology
Organized to promote the advancement of knowledge in the use of nuclear science and technologies in the aerospace application. Specialized nuclear-based technologies and applications are needed to advance the state-of-the-art in aerospace design, engineering and operations to explore planetary bodies in our solar system and beyond, plus enhance the safety of air travel, especially high speed air travel. Areas of interest will include but are not limited to the creation of nuclear-based power and propulsion systems, multifunctional materials to protect humans and electronic components from atmospheric, space, and nuclear power system radiation, human factor strategies for the safety and reliable operation of nuclear power and propulsion plants by non-specialized personnel and more.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Apr 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
May 2024
Nuclear Technology
Fusion Science and Technology
Latest News
NRC updating GEIS rule for new nuclear technology
The Nuclear Regulatory Agency is issuing a proposed generic environmental impact statement (GEIS) for use in reviewing applications for new nuclear reactors.
In an April 17 memo, NRC secretary Carrie Safford wrote that the commission approved NRC staff’s recommendation to publish in the Federal Register a proposed rule amending 10 CFR Part 51, “Environmental Protection Regulations for Domestic Licensing and Related Regulatory Functions.”
Yujiro Ikeda, Mahmoud Z. Youssef
Fusion Science and Technology | Volume 13 | Number 4 | May 1988 | Pages 616-643
Technical Paper | Tritium System | doi.org/10.13182/FST88-A25138
Articles are hosted by Taylor and Francis Online.
Several integral experiments on tritium breeding were jointly performed at the Fusion Neutronics Source (FNS) facility at the Japan Atomic Energy Research Institute (JAERI), in connection with the U.S./JAERI Collaborative Program on Fusion Breeder Neutronics. Tritium production rates from 6Li (T6) and 7Li (T7) were measured at several locations in an Li2O assembly (D = 60 cm, L = 60 cm) embedded in the concrete wall of a 5- × 5- × 4.5-m room (reference experiment). JAERI has also performed independent benchmark experiments with the Li2O assembly located in a large room of negligible room-return neutrons. In the reference experiment, large discrepancies in T6 were found at the front locations in the Li2O assembly. At middle locations, the calculated-to-experimental (C/E) values for T6 are ∼1.2 (U.S.) and ∼1.1 (JAERI). The C/E values for T7 are ∼1.18 (U.S.) and 1.05 (JAERI). To assess the contribution to the uncertainty in predicting T6 and T7 that results from the current uncertainties in the nuclear data base, an extensive two-dimensional cross-section sensitivity/uncertainty analysis was performed. For that purpose, the FORSS module, and the VIP and DOT 4.3 codes were used along with the PUFF-2 covariance code. Two systems were considered for the analysis: the benchmark system and the reference system. The models used simulate the geometrical details and source conditions for the experiments. After coupling the sensitivity profiles with the cross-section uncertainty information (ENDF/B-V, file 33), it was found that the standard deviations in T6 are 2.0 to 3.5%. In the reference system, the uncertainties in T6 at front locations due to data uncertainties were found to be very small (∼0.3%). The large discrepancies at these locations between the calculation and measurements were attributed to inaccuracy in modeling and predicting the room-return component of incident neutrons. The uncertainties in T7 due to the uncertainties in nuclear data were found to be 3 to 6%, with the largest values at back locations. The discrepancies with experimental values were attributed to the inaccuracy in the 7Li(n,n′α)t cross section, which requires further evaluation.