ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Accelerator Applications
The division was organized to promote the advancement of knowledge of the use of particle accelerator technologies for nuclear and other applications. It focuses on production of neutrons and other particles, utilization of these particles for scientific or industrial purposes, such as the production or destruction of radionuclides significant to energy, medicine, defense or other endeavors, as well as imaging and diagnostics.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Mar 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
April 2024
Nuclear Technology
Fusion Science and Technology
February 2024
Latest News
Remembering Joseph M. Hendrie
Joseph M. Hendrie
To those of us who knew Joe, even prior to his appointment as chair of the Nuclear Regulatory Commission, it is an understatement to say that he was a larger-than-life member of the nuclear science and technology enterprise. He was best known to the broader community for two major accomplishments: the design and construction of the High Flux Beam Reactor (HFBR) at Brookhaven National Laboratory and the creation of the standard review plan (SRP) for the U.S. Atomic Energy Commission.
In addition to the products of these endeavors becoming major fundaments to their respective communities, they were uniquely Joe. The safety analysis report for the HFBR was written essentially single-handedly by him. This was true of the SRP as well, which became the key safety review document for the NRC as it performed safety reviews for the growing number of power reactor applications in the United States. His deep technical knowledge of nuclear engineering and his extraordinary management skills made this possible.
N. M. Ghoniem, M. A. Firestone, R. W. Conn
Fusion Science and Technology | Volume 10 | Number 3 | November 1986 | Pages 1133-1145
Fusion Reactor Design—II | doi.org/10.13182/FST86-A24884
Articles are hosted by Taylor and Francis Online.
Operational aspects of a model tokamak system with a solid-breeder blanket are presented. The model blanket is an evolution of the STARFIRE and BCSS design studies. Full-power reactor operation is at a neutron wall loading of 5 MW/m2 and a surface heat flux of 1 MW/m2. The blanket is a pressurized steel module with bare beryllium rods and low-activation HT-9-(9-C-) clad LiA102 rods. The helium coolant pressure is 5 MPa, entering the module at 297°C and exiting at 550°C. The system power output is rated at 1000 MW(e). In this paper, we present our findings on various operational scenarios and their impact on system design. We first start with the salient aspects of operational physics. Time-dependent analyses of the blanket and balance of plant are then presented.