ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Fuel Cycle & Waste Management
Devoted to all aspects of the nuclear fuel cycle including waste management, worldwide. Division specific areas of interest and involvement include uranium conversion and enrichment; fuel fabrication, management (in-core and ex-core) and recycle; transportation; safeguards; high-level, low-level and mixed waste management and disposal; public policy and program management; decontamination and decommissioning environmental restoration; and excess weapons materials disposition.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Mar 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
April 2024
Nuclear Technology
Fusion Science and Technology
February 2024
Latest News
Remembering Joseph M. Hendrie
Joseph M. Hendrie
To those of us who knew Joe, even prior to his appointment as chair of the Nuclear Regulatory Commission, it is an understatement to say that he was a larger-than-life member of the nuclear science and technology enterprise. He was best known to the broader community for two major accomplishments: the design and construction of the High Flux Beam Reactor (HFBR) at Brookhaven National Laboratory and the creation of the standard review plan (SRP) for the U.S. Atomic Energy Commission.
In addition to the products of these endeavors becoming major fundaments to their respective communities, they were uniquely Joe. The safety analysis report for the HFBR was written essentially single-handedly by him. This was true of the SRP as well, which became the key safety review document for the NRC as it performed safety reviews for the growing number of power reactor applications in the United States. His deep technical knowledge of nuclear engineering and his extraordinary management skills made this possible.
P. Y. Hsu, L. G. Miller, G. A. Deis, Y. D. Harker, G. R. Longhurst, T. S. Born, E. H. Ottewitte, K. D. Watts
Fusion Science and Technology | Volume 4 | Number 2 | September 1983 | Pages 1216-1221
Blanket and First Wall Engineering | doi.org/10.13182/FST83-A23023
Articles are hosted by Taylor and Francis Online.
A large-volume, distributed, pulsed, 14 MeV neutron source, which utilizes the high powered (270-GW) Power Burst Facility (PBF) at the Idaho National Engineering Laboratory, is described. The concept of utilizing existing fission test reactors to test fusion first wall/blanket (FW/B) components and systems has been adequately documented. In all previous scenarios, the normal fission spectrum (including tailoring) was shown to produce adequate heating profiles and some tritium breeding. However, one recognized shortcoming has been the absence of the 14 MeV neutron component. This paper describes a scheme whereby the fission neutrons would be employed to produce the desired 14 MeV component. The data obtained from tests in this large-volume [20 em (8 in.) in diameter and 90 em (36 in.) in length], distributed neutron source will pertain to both near-term (Tokamak Fusion Test Reactor—TFTR) and future pulsed fusion machines. Specifically, application requiring high flux but low fluence is foreseen in the areas of dosimetry benchmarking for tritium breeding performance code verification. As a general purpose, FW/B integrated technology development capability, the PBF is shown to be pertinent to addressing the bulk-heated, solid breeder blanket thermal and mechanical issues; tritium permeation in the presence of radiation, and barrier development in the prototypical radiation environment associated with the first wall; issues associated with the technology of breeder materials; and in situ tritium recovery process characterization and system development.